Engineering Catalogue here - Powerpac Group Ltd

HEAD OFFICE: Cnr Raiha Street and Sunlight Grove, Porirua. PO Box 50-522, Porirua, New Zealand.T: 64 4 237 9361 F: 64 4 237 2513E: sales@powerpac.co.nz

CONTENTSINDEXAbout Powerpac ……………………............................ ......2,3What’s New …………………………….................................. 4ENGINEERING – METAL PROCEESINGGRIT – Belt Grinding Systems ...................... 5- 6, 10-13Pipe Notchers ........................................... 7, 14Cylindrical Grinding ................................... 8, 17Deburring/Abrasives .................................. .....9Mobile Linishers ........................................... 15Surface Grinding ........................................... 16FEIN - Metal Processing tools .................................. 18Angle grinders/Polishers .............. 19-25, 28-29Pipe Sanders ................................................ 26Die & straight grinders .................................. 27High Frequency .......................................30-31Magnetic base drills ................................. 32-33Drilling ................................................. ...34-35Sawing ......................................................... 36Nibblers & Shears ........................................ 37Sanding & Dust extraction .............................38MultiMaster .............................................39-44Supercut .................................................45-46CEVISA – Plate & Pipe Bevellers ...................................47ALFRA – Magnetic Base Drills ................................48-52Bevellers ......................................................53Cutters & accessories ..............................54-58SWISS LEVEL – Digital Levels .......................................59FLEX – Angle grinders, polishers, saws, cutters ....60-61TRUMPF – Shears, Fasteners, Seamlockers,De-burrers ....................................................62Bevellers, Nibblers ........................................63AIR TOOLSCP- Impact Wrenches .....................................64-65Cordless impact wrenches,Ratchet wrenches .........................................66Die & Angle grinders .....................................67Drills & Tire buffers ......................................68Chippers & Riveters ......................................69Sanders .......................................................70Nibblers, Shears ...........................................71Recipro saw, Cutter .......................................71Engraving Pen, Screwdriver ...........................71FUJI- Angle & Straight grinders ..............................72Die grinders & Pipesaw .................................72Drills ............................................................73Chippers & Sandrammers .............................73TREWLANY – Needle scalers, Long reach scalers& scabblers ..................................................74Air tool accessories .......................................75APT – Pneumatic breakers, chippers, rock drills& tampers ...............................................76-78Accessories – hose, coupling, oilers ..............79WYCO - Concrete Vibrators ................................80-82Established in 1976, Powerpac is a family business which employs 17full-time staff including 11 sales staff of which 6 have been at Powerpacfor over ten years. This means for you that a huge range of industryknowledge and experience has been accumulated for your benefit.Our No. 1 priority is to increase your productivity by supplying highquality tools for the manufacturing, construction and engineeringindustries backed up strongly by after-sales service and spare partsbackup.Products guaranteed to perform for you exactly as we recommendTop brands, tested and internationally recognisedInternational network for sourcing, supply and serviceRapid next-day delivery for orders in by 4.30pmQuality repairs and spares promptly availableEasy flexible payment planincluding major credit cardsCONSULTING: On-site demonstrations and evaluationSERVICE: In-house engineers and nationwide service agentsWe have a fully equipped servicedepartment which is able toprovide:• Thorough and efficientmaintenance and repair• Calibration and torquemeasurement servicePowerpac has strategicallypositioned it’s consultantsnationwide so that no one is farfrom on-site demonstrations orevaluations.• Load/brake testing for electric &pneumatic hoists up to 5000 kg• Spare parts stock is our No.1priority to maintain a quick turnaround and keep down time to aminimum.Comprehensive range of catalogues covering all divisions of the Powerpac Group- Call us to receive your copy today.

ENGINEERINGPowerpac Engineering covers a vast expanse of engineering equipment for all aspects of the industry.Starting with a large range of industrial air tools for assembly to heavy engineering with all the associatedaccessories and support. As well as a range of heavy duty pneumatic tools for lifting floor coverings, chippers,needle scalers and large rock drills, paving breakers and tampers. The stainless steel industry is a large portionof this division with pipe notching and polishing equipment and a big range of specialized polishing andgrinding tools. With a large range of magnetic base drills and cutters along with plate bevellers and nibblers youwill find the niche-market as well as your every day engineering tool requirements at Powerpac.FEIN– High quality power tools for engineering & stainless ALFRA – Magnetic base drillsGRIT – Linishers, pipe notchers & polishers FUJI – Heavy duty air tools FLEX - Electric toolsTRUMPF – Bevellers, nibblers & seam lockers FIAM – Screwdrivers & angle tools for assembly industryCEVISA – Plate & pipe bevellers CP - Pneumatic Tools TRELAWNEY – Needle scalers, scabblers, chippersMATERIALS HANDLINGThe Materials Handling division offers a very comprehensive range to cover all your product handling needs.Specializing in air and electric hoists from 60 to 5000kg with all trolley options and additional heightrequirements. With a large range of vacuum lifting equipment for sheets, cartons, bags etc, Powerpac canadvise and supply for every lifting application. Overhead, freestanding and wall mounted gantry systems aswell as wall mounted and freestanding Gibs and now with addition of a large range of lifting magnetic for thesmallest piece to the largest sheet and a comprehensive range of spring balancers with standard and extralong lift as well as with recoil hoses – Powerpac can help.NITCHI – Electric hoists & trolleys ANVER – Vacuum lifters GORBEL – Workstation cranes & GibsENDO – Pneumatic hoists, trolleys & spring balancers Lifting accessories – Lifting magnetsSURFACE PREPARATIONOur Surface Preparation division offers one of the largest ranges of specialized interior/exterior constructionequipment in New Zealand. Starting with large concrete grinders and extraction systems, portable mixingstations for toppings and coatings through to every tool used for interior plastering including sheet lifters, longreach sanders and specialized taping machines. A large range of specialized diamond product is available,water feed polishers for concrete and natural stone and a massive range of hand tools for brick and block andinterior/exterior plasteringFLEX – Drywall sanders STARMIX – Dust extractors FLOOREX – Concrete grindersTAPETECH – Taping machines SWISS LEVEL – Laser levels & distance measuring toolsAPT – Heavy duty paving breakers, tampers & rock drills INTEX – Interior plastering tools & accessoriesAXIS – Exterior plastering, brick & block tools PORTA-MIX – Portable mixing stationsZIPWALL – Dust barrier system DELFIN – Dust extractorsFlooring accessories – Spike rollers & shoes, leveling toolsBeen established early 08, Powerpac “On-Site” is the answer to many frustrations and difficulties on anyconstruction site. With a full colour, fully priced catalogue of over 100 pages for product, everything from theground up, ordering is very easy. From equipment needed for the original site works to the finishing touchesyou will find it in the “On-Site” catalogue. Being imported and sold direct, the pricing is extremely competitiveand is available nationwide. With a comprehensive freight system deliveries can be made direct to site or offshore.WYCO – Concrete vibrators ESTWING – Striking tools APT – Heavy duty pavingbreakers, tampers & rock drills MARSHALLTOWN – Concrete toolsFORTRESS – Site security fencing SILTMASTER – Silt & barrier meshZIPWALL – Dust barrier system DELFIN – Dust extractorsConstruction accessories – Precast chairs, abrasives, personnelprotection, concrete drilling etcNOTE: Prices are subject to change without notice

GI SERIES BELT GRINDING SYSTEM• High-performance belt grinders available either with 1 or 2 speeds.• Constant speed at high grinding performance thanks to powerful, robustmotor• Ease of operation: low vibrations, patented belt-tensioning system• Great work safety: Stop, grinding gap, and eye protection can be adjustedindividually• Ready for connection also to central extraction systemsSee Pages 10 - 17Unique expertise, versatile performance:The new FEIN MULTIMASTER generation can do more.As the inventor of the electric drill, FEIN has been developing innovative andunbeatably efficient solutions for all kinds of uses, both under heavy dutyindustrial conditions and in DIY applications.We use this expertise to improve the oscillating FEIN MULTIMASTER systemcontinuously. So that you can meet all the demands made during the workingday to perfection, we are constantly adding new and innovative accessories tothe range.ALFRA V32Horizontal Metal Core Drilling Machine for the pokiestspaces. Perfect to use, where regular MetalCore Drilling Machines have to quit due to theirheight. See page 51ANVER/GORBEL: EasyMagnetic MaterialHandlingFor reducing health & safety issuesas well as increasing production.Further additions to thematerial handling range include:• Sheet & plate lifters• Free standing swing arm gibs• Articulated swing arm gibsCevisa from Spain uses the principle of milling opposedto punching to create bevels for welding. This methodis silent and creates no heat causing changes in thesteel. Without sparks or dust, this method is easily thenumber one option over conventional alternatives suchas gas or grinding. See page 47Our new LIFTING EQUIPMENTCatalogue ... Situated at the back of thisBuyers Guide. The latest technology availablefor every material handling application.• Air and electric hoists• Gantry systems• Vacuum lifting equipment• Full of all technical information so everyquestion is answered and locating theright solution is made easy.ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE4 0800 654 0304

GX Series - Linishing Systemfor heavy duty useConstructed for operation in manual trade or for small series production, theGRIT GX programme stands out especially due to high efficiency: Whether forrough grinding or surface polishing, with GRIT GX machines you work withspeed and with high quality. GRIT GX machines can also be quickly convertedfrom one task to the next, are reliable in operation, and constructed reallyrobustly.• Ideal for use in the workshop and for small series production• Covers all standard grinding tasks: Belt, scolloping and cylindrical grinding• Quickly installed, quickly converted, because they are easy to assemble• Great work safety and machine reliability• Professional working results because of professional equipment andaccessories0800 654 030ALL PRICES EXCLUDEGST, E & OE5

GXSERIESThe perfect base:Belt grinders GX75 / GX752HGX75 or GX752H is the basis for the system. A powerful belt grinder on which you canrely for professional applications - because it contains the know-how of 25 yearsof mechanical engineering and practical belt grinding: robustly built, easyto assemble, and equipped with everything that eases the work andthe operation.• Robust AC motor provides grinding with steady speed• Speeds optimal for metal working: GX75 with 3,000/min; GX752Hswitchable to 1,500 or 3,000/rpm.• Fast, easy belt change via a gas strut system meaning perfect tension - nofidley adjusting or setting• Comfortable operation by adjustable work level, height-adjustable support for planegrinding and easy belt adjustment• Great work reliability because of stable machine base and solid cutting table• Connector intergrated for dust extraction (dia. 90mm)• Detachable swarf collectorTechnical Data GX75 GX752HPower 3 kW 1.5/2 kWCurrent/Voltage 400 V(3 ∼) 400 V(3 ∼)Speed 3,000 rpm 1,500 / 3000 rpmBelt size 75 x 2000 mm 75 x 2000 mmWeight 75 kg 75 kgIncluded in delivery: 1 grinding belt 75 x 2,000 mm, 36 grit$2399.00 $2850.00Versatility for every jobThe great power output of the motorsprovide the GX75 belt grinderswith outstanding capacities. Highgrinding capacity in brief timeis thereby guaranteed - just ascomfortable working. The GX75and the GX752H are especially lowin vibration during operation andfacilitate exact working thanks to itspatented belt tensioning system.Whether grinding, weld seampolishing, chamfering, deburring,or plane sanding - with GRIT youalways work optimally. And thereforealso especially cost-efficiently.Optimally working in the planePlane grinding is part of the standard features ofthe GRIT. A large grinding area of 75 x 420 mmis just as standard for both GX75 machines as aheight-adjustable plane grinding table and easybelt adjustment.ALL PRICES EXCLUDEGST, E & OE6 0800 654 030

Everything simply fits together:Radii grinding module GXRGrinding exact notches on pipes is a question of the right machine: By attaching the GXR module,a GX752H basic unit belt grinder converts into a professional notch grinding machine in just a fewsteps - equipped with depth stop, traverse carriage, and fast-clamping. Grinding down for precisionfitting becomes so easy - and much more user friendlier.• For the precise grinding of profiles and pipes from Ø 16-75 mm• For angles of 30º to 90º30º / max. dia. 37.5mm45º / max. dia. 53.0mm60º / max. dia. 64.5mm90º / max. dia. 75.0mm• Precise and user-friendly working by intergrated depth stop and vice with fast-clamping for roundand square pipes as well as solid material• Contact rollers are available in all common sizes• Vice with stainless steel clamping jaws• Low speed (1,500 rpm) optimal for processing stainless steel. Less burrs and tarnish• Easy handling by four easy-to-steer transport castersTechnical DataFor operation with the GX752HDiameter pipesdia. 16 - 75mmDimension profiles/flat material max.75 x 75mm $2669.00Belt size75 x 2,250mmWeight54 kgIncluded in delivery: 2 Contact rollers, 1 grinding belt 75 x 2,250 - 36 gritPerfect fit at any angleIt makes no difference whether pipes,profiles or solid material is being ground - thenotchgrinding module GXR is optimallysuited for that. And that is a standardfeature: for example with a traversecarriage that is precisely and quickly setto the required angle as well as a vicewith stainless steel clamping jaws andunique fast-clamping. That guaranteesprecise and sure grinding.Custom fit contact rollersPipes sized dia. 16-75mm and an attackangle of 30º to 90º can be ground to aperfect fit with the notch grinding module. Theextensive GRIT contact roller selection reliablycovers all usual pipe diameters.With length stop for production in seriesThe retrofitable length stop for the GXRnotch grinding module ensures consistentlyprecise results in series production. It can beattached later and can be set along a lengthof 1000mm.0800 654 030ALL PRICES EXCLUDEGST, E & OE7

Really good, really fast:Cylindrical grinding module GXCThe GXC cylindrical grinding module allows for perfect surfaces in the simplest manner. Theconversion to a "Centerless" cylindrical grinding machine is done in just a few steps.Efficiency and flexibility are apparant in the design and construction.• For grinding of pipes and shafts from dia. 10 - 100mm• High process speed at highest surface quality• Also suitable for wet-grinding in connection with the cooling lubricant module GXW• Easy handling by four easy-to-steer transport castersTechnical Data for operation with the GX75 orGX752HPipes dia. 10 - 100mmBelt size 75 x 2,000mm$2759.00Weight 48 kgIncluded in delivery: 1guide rail, nylon; 1 guide rail, brass;GXW Cooling lubricant moduleCurrent/Voltage 400/440 V$1522.00Weight8.6 kgIncluded in the delivery: 1 litre cooling lubricant emulsion(1:30)Always on theright trackVarious guide rails are included in thescope of delivery that are tuned to thesurface quality of the workpiece. The guiderail made of brass for rough surfaces suchas corrosion, scale, etc., or laid out duringdry grinding. The nylon rail is the perfectchoice for surface polishing and sensitivematerial.ALL PRICES EXCLUDEGST, E & OEQuick shiny results all roundPerfect surface quality and high processspeeds on pipes and shafts are nocontradiction for the cylindrical grindingmodule GXC. Even commercially availablefleece belts can be used in connection withthe GX2H basic unit. The advance speed canbe infintely variably adjusted for the material;up to 2 metres per minute.GXW for wet grindingThere are several arguments for wet grinding usingthe GXW cooling lubricant module: the swarf isbonded immediately which increases theservice life of the sanding belts, the finishingresults are noticeably improved and thanksto the reduced heat during grinding thecorrosion risk for stainless steel pipes isreduced. A closed circuit ensures sparingconsumption of the coolant.8 0800 654 030

Finishes up the job neatly:Deburring machine GXEGXe ( without machine base)An ideal addition to the GRIT GX program: The deburring machine GXE completes the finaltask. It is highly effective for deburring pipes, profiles and flat materials. The broad spectrumof GRIT deburring brushes solves nearly all deburring jobs.• For deburring pipes and profiles• Connection for extraction option available• Employable as polishing machine when using appropriate polishing wheels• High operational reliability due to intergrated safety switch with motor protection• Broad range of wire brushes availableTechnical DataPower2.2kWCurrent/Voltage 440 V(3 ∼)Speed1,440 rpm$1980.00Tool dimension max.dia. 250 x 60 mmConnecting cable2 mWeight32 kgIncluded in delivery: Motor protection switch, stand, undervoltage releaseThe selection of GRIT accessories is customized to the applicationconditions in the tough employment of the manual trade. High-qualitycomponents that we manufacture ourselves, compatible to the GRITphilosophy.And developed for the special application range of each individualproduct. That provides reliablility and maximum satisfaction. Constantquality controls ensure this high standard.GRIT grinding media RThe top grinding belt commercially available. With significantlyless processing time and significantly superior service life.Recommended primarily for processing rustproof and highalloysteels.Grinding beltQuality: Extra heavy polyester fiber fabric, full resin bondwith zirconia alumina. Additional top layer for cooling duringthe grinding process. 10pcs./packBelt size 75 x 2,000mm Grit Part Number Price36 6 99 03 002 00 0 $27240 6 99 03 004 00 0 $22460 6 99 03 007 00 0 $19980 6 99 03 009 00 0 $187120 6 99 03 013 00 0 $177Belt size 75 x 2,250mm 36 6 99 03 020 00 0 $3040800 654 030Only the best:Original GRIT accessoriesGRIT grinding media ZThe all-rounder for grinding and deburring of steel and nonferrousmetals that satisfies highest demands. Developedin cooperation with professional users, this belt stands outespecially due to its long service life and performance aswell as due to its cost-effective application.Grinding beltQuality: Heavy polyester fiber fabric, full resin bond with zirconiaalumina. 10pcs./packBelt size 75 x 2,000mm Grit Part Number Price36 6 99 03 003 00 0 $17940 6 99 03 005 00 0 $17060 6 99 03 008 00 0 $15680 6 99 03 010 00 0 $156120 6 99 03 014 00 0 $156Belt size 75 x 2,250mm 36 6 99 03 021 00 0 $201ALL PRICES EXCLUDEGST, E & OE9

GRIT GI - for use in industryDeveloped especially for heavy-duty work in industry, the GI programmestands out because of its power and efficiency.All elements are extremely robust; high loads and long service lives aretherefore a standard feature of the GRIT GI machine – just as high operationalreliability and simple operation.1. Broad range of applicationsGRIT GI machine process all materials and formats that are commonin the metal industry: steel, stainless steel and non-ferrous metals –as flat, round or square materials. All grinding applications belong ofcourse to the programme: Plane, cylindrical and abrasive grinding aswell as sanding down, radii grinding, chamfering and deburring.2. Construction for industrial useProfessional application in industry has especially high requirements –and they are optimally met by the GI programme: Robustly constructedand equipped with extremely powerful motors, a GI machine alwaysruns reliably, even in non-stop operation. Partially automated cyclesmake the task easier.3. Quickly amortisedThe acquisition costs for a GRIT GI machine are amortised quickly,because you can work quickly, in high quality – and thereby especiallyefficiently, particularly with automated work steps.4. EconomicThe GRIT GI programme is modularly designed: Depending onthe application you can assemble the optimal machine – from themachine base with or without extraction and the basic machine tothe grinding module. If a job situation changes, then a radii grinderfor example is quickly converted to a surface grinder.ALL PRICES EXCLUDEGST, E & OE10 0800 654 030

GISERIESBasic belt grinderGI 75GI 75 2HGI 150GI 150 2H+ =GIBGIBEMachine baseBelt grinderGI 75 (2H) / GI 150 (2H)• High-performance belt grinders available either with 1 or 2 speeds.• Constant speed at high grinding performance thanks to powerful,robust motor• Ease of operation: low vibrations, patented belt-tensioning system• Great work safety: Stop, grinding gap, and eye protection can beadjusted individually• Ready for connection also to central extraction systems• Quick release belt tension system - via gas strutGIB / GIBE• Work height can be adjusted convenientlyby gas compression springwithout effort• Great steadiness because of robust constructionGIBE• Integrated motor for highly effective double extraction• Cassette filter for effective air cleaning• Integrated metal swarf collector, resistant against hot sparks• Flexible, heat-resistant steel suction hoses0800 654 030ALL PRICES EXCLUDEGST, E & OE11

GRIT GIfor use in industryGI - for use in industryIndustry puts especially high demands onbelt grinders, from series production up toextremely harsh applications. The GRIT GIprogramme is designed especially for that:All grinders are equipped with extremelypowerful motors; even longer operatingtimes and high loads are no problem for therobust construction. The simple handlingincreases the efficiency as well as thereliability.Full performanceAn extremely powerful motor makes surethat the speed always remains constantduring operation. The robust constructionguarantees durable operation even underthe toughest conditions. And with theappropriate modules both can be quicklyand easily converted to notch and surfacegrinders.Unrivalled neatnessThe GIBE machine base with double suctioncaptivates by its wealth of practical details:resistant against sparks, equipped with ametal swarf collector, suction hoses madeof steel and a cassette filter, it optimallyconforms to the requirements of industrialoperations.GI 75 GI 75 2H GI 150 GI 150 2HPower 4 ,000 W 2,600 – 3,100 W 4 ,000 W 2,600 – 3,100 WSpeed 3,000 rpm 1,500/3,000 rpm 1,500 rpm 1,500/3,000 rpmBelt size 75 × 2,000 mm 75 × 2,000 mm 150 × 2,000 mm 150 × 2,000 mmWeight 65 kg 65 kg 82 kg 82 kgGIBGIBEPower - 350 WWeight 17Kg 55Kg$3855.00 $4600.00 $4660.00 $5430.00Contents 1 grinding belt 75 x 2,000 mm, 1 grinding belt 150 x 2,000 mm,include: 36 grit 40 gritContentsinclude:$666.00 $3785.002 pc. flexible hose4 pc clampingboardALL PRICES EXCLUDEGST, E & OE12 0800 654 030

Small in size - big on powerBelt Grinder GI 100GI 100Basic belt grinderOptional machine base+ =GIXS Standard BaseGIXBE Dust Extraction BaseBelt grinderGI 100 with GIXBEMaximum performance in smallestformat: The Belt grinder GI 100 is theuniversal machine for abrasive grinding,deburring of small parts and forcontinuous surface grinding in seriesproduction. Its small size makes thisrobust and compact belt grinder theperfect alternative in confined spaces.The GI 100 can be either bench orstand mounted - another versatilefeature.GI 100• Universally applicable belt grinder with excellent performancevalues• Optimal use in machining of small parts• As a table machine or on optionally available machinebase with or without integrated suction• Patented belt-tensioning system by gas spring• Outstandingly suited also for mobile employment inworkshop or assembly vehicles• Also available as a variant with single-phase AC current230 V/50 Hz• Surface grinding with flat bed surfaceTechnical Data GI 100Power1,500 WSpeed3,000 / minCircumferential speeds 30 m / sec.Belt size100 × 1,000 mmWeight28 kgIncluded in delivery: 1 Grinding belt 100 × 1,000mm60 gritBase optionsGIXS Standard BaseGIXBE Dust Extraction Base$2366.00$603.00$3995.000800 654 030ALL PRICES EXCLUDEGST, E & OE13

Pipe notching in seconds:Pipe notching module GIRBasic belt grinderMachine basePipe notching modulePipe notching machineGI 75GI 75 2HGI 150GI 150 2H+ + =GIBGIBEGIRGI 150 2H + GIBE + GIRRobust and powerfulIts robust construction had been developedespecially for use in industrial environments;continuous use is no problem for the GIRmodule. Just as the processing on thickwalled materials or solids: The great poweroutput of the motors ensure economicalgrinding of pipes.Fast and exact: the pipe notching module GIR is optimallytuned to industrial applications. The high abrasionperformance guarantees economic operation – and with150 mm belt width the GIR is also suited for workpieces withgreater diameters.Quite flexibleSo that everything really fits during mitre grinding, GRIThas developed a special mitre grinding plate. Its simpleattachment while retaining the belt length makes it uniquein the market. The mitre grinding plate, for which patent hasbeen applied for, is available as an option for the GIR module.Maximum pipe diameter:• 0° – 110 mm • 30° – 80 mm • 45° – 60 mm$5460.00Technical DataDiameter pipesDimensions profile s /flat material max.Belt sizeWeightIncluded in delivery:GIRØ 20 – 150 mm120 × 150 mm150 × 2,250 mm109 kg1 x contact roller for Ø 42.4mm;1 grinding belt 150 x 2,250,36 gritGIR• Precision notch grinding of pipes up to Ø 150 mm• Vice with exchangeable stainless steel jaws and rapid clamping system• Integrated depth stop for series production• Setting angle adjustable without tools• For angles of 30° to 90°30° / max. Ø 30 mm45° / max. Ø 105 mm60° / max. Ø 130 mm90° / max. Ø 150 mm• Contact rollers available for all common pipe diameters• In combination with GI 150 2H: Low speed (1,500 rpm) optimal for processingstainless steel and for use with contact rollers < Ø 35 mm• Effective double extraction when using the GIBE machine base with adaptorALL PRICES EXCLUDEGST, E & OE14 0800 654 030

Makes belt grinding mobile:GIM carriageBasic belt grinderGI 75GI 75 2HGI 150GI 150 2H+ =GIMMobile baseGrinding mobilebasic belt grinder + GIMThe GIM grinding module is employedwhen the workpiece cannot betransported without a major effort.The belt grinder then turns into amobile grinding unit – and can thenbe put to work on site, for examplein ship construction. Weld seams onthe floor can be polished in passing –without fatigue; without bending overand with a great deal of time savedcompared to alternative methods.GIM• Highly effective grinding / polishing of weld seams onthe floor• Subsequent grinding of steel casting moulds for prefabconcrete• Comfortable work handling, fatigue-free withoutbending over• Easy handling• Minimum wall clearance• Towing bar position can be adjusted infinitely variable• Adjustable depth stopTechnical Data GIMBelt size 75 / 150 x 2,000Weight35 kg$2786.000800 654 030ALL PRICES EXCLUDEGST, E & OE15

Surface grinding completely automatic:Surface grinding module GILBasic belt grinderMachine basemodulePipe notching machine+ + =GI 150GI 150 2HGIBGIBEGILGI 150 2H + GIBE + GIRSurface grinding made easyEven the longitudinal grinding of square and flatmaterials or profiles is made incredibly easy withthe unique surface grinding module GIL – justas the conversion from belt to surface grinder.The belt dimensions of the basic machine remainunchanged thereby. Patent has been applied forthis GRIT solution.Perfect surfacesAll metals – from steel and non-ferrous metals upto stainless steel – can be perfectly machined,without making compromises on the surfacequality. Even the strict requirements of stainlesssteel processing up to final finishing are fulfilled bythe GIL module with ease.GIL• Perfect finishing results up to finish as fast aspossible• Easy handling• For angled workpieces• Module can be swivelled on the basic machine(optional), thus saving space in the workshop• Using the contact plate on the basic machine ispossible even if the GIL module is mounted.• Workpiece width can be individually set byadjustable stops• Flat material can also be ground “upright”Essential for machine and hand rail constructionas well as for welding construction: The GILmodule for longitudinal grinding is the only oneon the market that features an automatic feed.GIL provides perfect surfaces quickly andeconomically and is suited for all metals, evenstainless steel processing.Technical Data GILBelt size150 x 2,000 mmPerformance feed motor 180 WDimensions profiles /flat material max. 100 x 120 mmWeight64 kg$6590.00ALL ALL PRICES PRICES EXCLUDE EXCLUDEGST, GST, E & E OE & OE16 16 0800654 654030030

Shiney results all around:Centreless grinding centre GICSExactly the right machine for outer cylindrical grinding of pipes and roundmaterials in series: Centreless grinding centre GICS. From rough grindingto finish – the process speed of the GICS is impressive, just as the workquality. Even stainless steel receives the perfect final finish.Even pipes with greater diameters and other round materials can beground rationally and with brief processing times using the GICS grindingcentre. An integrated cooling lubrication and the infinitely variable feedspeed are the best prerequisites for processing suiting the material up tothe perfect surface, even for such demanding material such as stainlesssteel.The GICS centreless grinding centre has standard equipment foreverything that is necessary for easy and convenient operation. Resolutelydesigned for use in series production, the GICS has been robustlyconstructed and features superior machine reliability.Longer workpiece can also be processed by the GICS without a problemby an optimal linear guide combined with extension fittings with prismguide. This guarantees the precise alignment in horizontal and verticaldirection.Centreless grinderGICSTechnical Data GICSPower max.3,100 WSpeed 1500 / 3,000 / minCircumferential speed 30 m / secBelt size75 x 3,000 mmWeight200 kgIncluded in delivery: 1 guide rail brass1 guide rail nylon 1 guide roll rubberized1 Lt cooling lubricant 1 grinding belt 75 x 3,000 mm,220 gritFrom$24160.00for standard unit andexcludes optionalaccessoriesGICS• High performance cylindrical grinder for pipes and round material made of steel,stainless steel, cast and non-ferrous metals, from Ø 10 – 160 mm• High work speed and abrasion performance• 2 speeds: Low speed (1,500 / min) optimal for processing stainless steel• Wet grinding for perfect surface quality up to the finish• Simple and effective belt adjuster and patented belt-tensioning system by gasspring• Integrated guide rail exchange system by turret head• Infinitely variable adjustable feed speed• Prism guide for long workpieces available as accessory• Expandable by linking two GICS grinding centres0800 654 030ALL PRICES EXCLUDEGST, E & OE17

FEIN: Inventions and power tools from Germanyfor over 140 years.Ever since it was first founded in 1867, FEIN has continually set newstandards - as the inventor of the electric hand drill and a premiummanufacturer of professional and extremely reliable power tools. Thequality synonymous with the FEIN name and the legendary reputationfor durability have won FEIN products numerous accolades, as wellas over 800 patents and industrial property rights. These attributeshave made FEIN what it is today - a company with a rich heritageand global reputation that is firmly committed to Germany as abusiness location.This reputation gives us an obligation and incentive to continue drivingforwards while confirming that we areon the right track. And that’s what we devoteour energies to every single day as wecontinue to research anddevelop new products.Made in GermanyQuality of the highest standardFEIN is firmly committed to its homecountry of Germany. There are very goodreasons for this: values like inventiveness,quality and reliability are the reasons forour 140 years of success and top qualityproducts.Around the world, over the decades, FEINpower tools have gained a reputation fordurability in trade and industry. The keyfactors in the success of FEIN power tools arereliabilty, maximum safety and precision.FEIN: the specialist for solutions in metal applicationsFEIN: the specialist for solutions in automotive applicationsFEIN: the specialist for solutions in interior constructionALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE18 0800 654 03018

Powerful, robust, reducedvibration - FEINcompact angle grindersThe new generation incompact angle grindersHIGH POWER - withalmost no vibrationSelf supporting motor design thanks toseparation of motor and housingBalanced distribution ofvibrationAre you looking for a powerful angle grinderfor industry or manual trades that allowsyou to work for hours at a time withoutsignificant vibration? Then the FEINcompact angle grinders are the right choice!They are the only angle grinders specificallydesigned to reduce vibrations to a minimum.The low maintenance HIGH POWER MOTOR delivers impressivegrinding power and can handle loads across the whole workingrange up to 150%. FEIN compact angle grinders are tried andtested in heavy duty and industrial use.ResilientSpecially balanced armaturePrecision solid metal drive headElastically mounted ballbearingsReduced vibrationRapid clamp system allowing quick wheelchange. Clamps to 0.0mm, ideal for ultrathin cut off discs.Innovative braking design meaning the wheel stopswithin 3 seconds preventing long over run periods.(On EVO series only)High torque via the extremley close tolerances of themotor. Delivers optimum power consistantly.Tip start design meaning you can reach out and stilloperate the tool, no switches to knock, slim bodydesign. (On Evo series only)High precision solid metal drive head withball bearings sealed on two sides and dustprotection ring. Bandaging of armature andfield magnet.PowerfulFEIN armatureThe motor containsmuch more copper forunbeatable power.Elastically mounted ball bearings withvibration damping.Competitor’sarmature0800 654 030ALL PRICES EXCLUDEGST, E & OE19

• Unique convenience with FEIN Tipstart switch concept withoutswitches• Outstanding handiness in single-and two handed operation byoptimal ergonomic design• Trend setting safety features such as electrical brake systemEBS, rapid clamping system QuickIN, intergrated safety function,self-start lock, restart lock, and soft start.Place your hand around the waist andsqueeze gently.Easy-to-useWhat you can expect from FEIN EVOangle grinders is a completely new feelingof handiness - thanks to the ergonomicconstruction of the case design you can workso much longer without tiring. Using eitherone hand or both.The switch concept is the trend setter:Instead of a bothersome and fault-proneswitch there are four generously andergonomically optimally located switchpadsfor convenient switching in all work positions.A gentle press is all it takes.WSG 13-125• Low vibration values evenwithout the anti-vibration handle• Dustproof ball bearings• M14 THD output spindle• Unremovable wheel guardwith protection against twisting• Sealed electronics parts• Soft start •Restart lock• Carbon brushes with self-cutoff function• 1200 watt motor• 10,000 rpm•125mm wheel capacity• 2.0kg •356mm OALWSG 8 - 115 - 115mm version- same specification as above except:-• 800 watt motor $339.00$349.00One characteristic of the FEIN WS 13 angle grinder is its unique ease of operation.This is most appreciated in continuous use.ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE20 0800 654 03020SafeWhen safety is paramount - FEIN angle grinders with AutoStop and electronicbrake system.WSB 13-125• Low vibration values evenwithout the anti-vibrationhandle• Dustproof ball bearings• Unremovable wheel guardwith protection against twisting• Carbon brushes with self-cutoff function• 1200 watt •10,000 rpm• 125mm wheel capacity • 2.1kg $369.00• 356mm OALWSB 8-115 - 115mm version same specification as above except 800watt motor $349.00

SUPER SLIM NECK DESIGN• Outstanding handiness in single and two handed operation - ergonomicexcellence• Trend setting safety features such as rapid clamping system (QuickIN),intergrated safety function, self-start lock, restart lock, and soft start.• Long service life due to utmost robust, self contained motor constructionwithout fault-prone switch• Gentle start for recoil free and safe starting• HIGH POWER MOTOR for enormous torque for highgrinding capacity• Slim, robust, reliable - starts gradually with no jolt• Carbon brushes are at the front by the clean, cool air• No air inlets at the front of the tool• Auto stop carbon brushes, top bearing in the gearbox is a 20mm needlebearing for long service lifeWSG 14-125Unique ergonomic design for fatigue free working. Equally suited to rightand left handers.• Low vibration values even without the anti-vibration handle• Reliable, countersunk switch• Dustproof ball bearing• Unremovable wheel guard withprotection against twisting• Sealed electronics parts• Soft start• Restart lock• Carbon brushes with self-cutofffunction• 1200 watt • 10,000 rpm • 337mm OAL• 125mm wheel capacity • 2.1kg$429.00WSS 14-125• Unique ergonomics• Low vibration values even without theanti-vibration handle• Reliable, countersunk switch• Unremovable wheel guard withprotection against twisting• Sealed electronics parts• Soft start• Restart lock• Carbon brushes with self-cutoff function• 1200 watt • 10,000 rpm • 337mm OAL• 125mm wheel capacity • 2.1kg$439.000800 654 030ALL PRICES EXCLUDEGST, E & OE21

Total metalworkingcontrolAngle grinders and anglepolishers from FEINFEIN will enable you to achieve the highest standards of workwhen it comes to steel and stainless steel, sheet metal, vehiclepaintwork polishing and numerous other fields - whether usinggrinding disk, sponge, brush, abrasive flap wheel, lambs fleeceor felt.The 1200 Watt High Power Motor allows you to work with constantoperating speed. The variable electronic speed control ensuresthat you always have the correct speed for any application.Polish preparationScratch removalALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE22 0800 654 03022Weld seam removalTarnish removalOne of the most versatile tools for the stainless industry. The WSG-14-70 E is acombination of high torque at the wheel and in the motor. Because of the speedrange the WSG-14-70 E covers many sanding applications using the latest technologyin abrasives. From weld seam removal to polishing preparation, the WSG-14 -70 Ewill get you there. You must be using a WSG-14-70 E if you have anything to dowith stainless.• HIGH POWER MOTOR - high grinding capacity over the entire operating rangeup to 150% load• Variable speed allows various tools to be used for applications ranging fromsatin finishing to sanding and preserves the surfaces• Unique ergonomic design for fatigue free working.Equally suited to right and left handers• Self supporting motor design• Low vibration values even withoutthe anti-vibration handle• Reliable, countersunk switch• Dustproof ball bearing• Dustproof tacho control• Sealed electronics parts• Soft start• Restart lock• Carbon brushes with self-cutoff function• 1200 Watt• 2500 - 7000 rpm$575.00• 349mm OAL• 125mm wheel capacity• 2.2 kg

Three machines in one:Angle polisher WPO 12-27 EBrilliant results for every applicationThe FEIN Professional set for stainless steel, with its universal basic accessoriesincluding WPO 12-27 E, covers a broad range of applications and is ideal fordeployment in numerous industries: plant construction, machine construction,building construction, container construction, company workshops, automotiveindustry, general industry, coachwork construction, boiler construction,artistic applications, metal construction, pipeline construction,shipbuilding, metalworking, welding technology, steelconstruction and so forth.$899.00FEIN BENEFITS• Extremely powerful even at low speedsthanks to mechanical gear reductionand FEIN High Power Motor• Infintely variable speed, ideal forsanding, satin finishing, brushingand high gloss polishing of stainlesssteel• Universal suitability as fully functionalsander, polisher and satin finisher• Excellent handling• Spindle lock • Restart lock• Self start lock • Soft start• Dustproof ball bearing• Carbon brushes with self cut offfunction• Comprehensive accessories rangeavailable• 1200 watt motor • 349mm OAL• 900 -2500 rpm • M14 THD spindleSTAINLESS STEEL SURFACES - Standard Set$1765.00Supplied with: Carry Case, 100 x 100mm Elastic Roller - 60 grit, 100 x 100mm FleeceRoller - 180 grit, 150mm layered wheel - fine, 10 x 115mm Fleece discs plus backingpad, Extention handle flange set, Wrench0800 654 030ALL PRICES EXCLUDEGST, E & OE23

For sparkling results when polishing ... FEIN anglepolishers. WPO 14-15 XEWhen it comes to treating painted surfaces on vehicles and boats,FEIN has polished solutions even for continuous use under highloads: the FEIN angle polishers WPO 15-15 E and WPO 14-15 XE.Both are equipped with the high-performance FEIN HIGH POWERMOTOR and two-stage gear reduction for extremely high torque.The machine always operates in the optimum speed range, whichremains constant even under load, for efficient working and brilliantresults. The low weight and minimal development of heat, combinedwith the ergonomic design, make this tool a pleasure to work witheven in continuous use. What’s more, FEIN supplies everything youneed - the right high-quality accessories for every application.Sophisticated gearboxThanks to its double reduction with beveland planetary gears, the FEIN Polisherdelivers almost unlimited power -even at low speeds.$999.00SPECIALIST POLISHING ACCESSORY UNITSFEIN BENEFITSPaint set for used carsThe set for preparing paintwork onused cars. plastic case contains: 1application matrix; 1 support plate withhook and loop fastening,ø 150mm; 1 polishing padø 150mm, medium; 1 polishing pad,orange, ø 150mm; 1 waffle padø 150mm; 1 lambskin ø 150mm:1 sheet mini sanding discs (53x, K2800); 1 manual sanding block; 1moisturising cube; 1 NANO paintseal 250 ml; 1 spray wax 100 ml; 1microfibre cloth; 1 cleaning brushALL PRICES EXCLUDEGST, E & OEPaint set for new carsSpecially designed for secondarypaintwork and relatively new used cars(one year old or less) with scratchresistantpaintwork and for use withnano-polishing agents. Plastic casecontains: 1 application matrix; 1support plate with hook and loopfastening, ø 150mm;1 polishing pad ø 150mm, medium;1 polishing pad, ø 150mm, orange,ø 150mm; 1 waffle pad ø 150mm;1 NANO polishing agent 250 ml; 1 1NANO paint seal 250 ml; 1 spray wax100 ml; 1 mircofibre cloth; 1 cleaning• Ideal speed range with infinitelyvariable speed control forprofessional surface processingon vehicles.• Maximum speed stability at anyload over the full setting rangethanks to mechanical gearreduction in conjunction withthe FEIN High Powered Motor.• Special system accessories forthe efficient refurbishment ofused car paintwork and highlyscratch-resistant paints, and forcleaning, sanding and polishingpainted surfaces.• Convenient speed adjustment• Does not heat up in continuoususe• Handle cover for excellentergonomics• Spindle lock• Self-start lock• Restart lock• Soft start• Carbon brushes with self-cutofffunction• 1200 Watt •200-1500 rpm• 2.4 kg • 368 OAL • 250mmøPolishing Pad dia capacity24 0800 654 030

FEIN MARINEPOWERPOLISHER IN BOATMAINTENANCE.VEHICLE / BOAT POLISHER- FOR BRILLIANT RESULTSEnduring power to save you time when cleaning, polishing,sealing or sanding: The FEIN MARINE POWERPOLISHER keepsyachts in good repair in record time. The supplied backing pad withextractor hood allows this tool to be used as a sander forwood, paint and in particular antifoul. This makes theFEIN MARINE POWERPOLISHER the perfect endurancetool for yacht maintenance – for boatyards, maintenanceservices, boat dealers, charter companies and boat owners.Sophisticated gearboxThanks to its double reductionwith bevel and planetary gears, theFEIN Marine PowerPolisher deliversalmost unlimited power - even atlow speeds.• Ideal speed range with infinitelyvariable speed control for professionalsurface processing on vehicles andboats• Maximum speed stability at any loadover the full setting range thanksto mechanical gear reduction inconjunction with the FEIN High PowerMotor• Special system accessories for theefficient refurbishment of used carpaintwork, new car paintwork andhighly scratch-resistant paints and forcleaning, sanding and polishing boatsurfaces and gelcoat layers• Convenient speed adjustments• Does not heat up in continuous use• Handle cover forexcellent ergonomics• Spindle lock• Self start lock• Restart lock• Soft start• Carbon brushes withself cut-off functionWPO 14-15 E FEIN BENEFITS• Can be converted to rotary sander withextractor hood and backing pad• Wide range of accessories• 1200 watts• 500 - 1500 rpm• M14 Thd• 1.9kg• 349mm OAL$1185.00WPO 14-156 MARINE KIT• 1 FEIN PowerPolisher WPO 14-15 E with handlecover and additional side handle in sturdy plasticcase• 1 x support plate 170mm• 1 x polishing pad• 1 x lamb’s wool, dome shape 235mm• 1 x extractor hood• 1 x backing pad, perforated• 2 x sanding fleece for antifoul• 1 x bristle fleece• Sanding sheets 150mm, perforated,2 each of grit 80, 150, 180• Order number 7 221 48 50$1329.00ALL PRICES EXCLUDEGST, E & OE0800 654 03025

AT A GLANCEFEIN professional set RS 12-70 Ewith basic equipment• HIGH-POWER-MOTOR for unmatchedperformance and durability.• Extremely high abrasion performance.• Cutting speed up to 22m/s• Sanding and polishing as quick as possible.• Usage ranges from rough grinding to mirror polish.• Sanding of pipe arcs in just two passes.• Tracking stability by precise belt guides.• Tool-free belt change.• Self-start lock prevents uncolled reactivation followingpower interruption..Strong, quick and versatilePipe sander RS 12-70 EPerformance & SpeedTwo things that count for processing stainles steel areperformance and speed. The FEIN HIGH-POWER MOTORprovides the pipe sander RS 12-70 E with a workingspeed of up to 22 m/s. The abrasive peformance isextremely high with top results - from rough sanding tomirror polishing. Stainless steel pipes with diametersfrom about 8 to 80 mm can be finished; especiallyhand rails and rods. Only two sanding passes arenecessary for sanding or polishing pipes becausethe belt envelops 180 0 of the pipe. Even hand railsthat are already mounted can be finished if theyare at least 50mm away from the wall.Comments from Customers" Even and consistant finish"" Found we could even use it onehanded by holding it vertical""Beautiful finish regardless of theoperator"Included in price:1 pipe sander RS 12-70 E;20 x 815mm Belts 40, 60, 120, 180 grit (10 ofeach) 40 x 815mm Belts 40, 60, 120, 180 grit (10of each)Power input 1,200WIdle speed 2,700-7,000 rpmWorking speed 22 m/sMin. wall clearance 50mmWeight3.8 kg approx.Cable with plug 4 mPipe diameter 8 - 80mm$2350.00ALL PRICES EXCLUDEGST, E & OE26 0800 654 030

FEIN- Precision GrindingMshy 664Robust straight grinder with flangewheel clamping.• High performance motor withimpressive power.• For rough grinding, sanding andpolishing applications• With the corresponding accessoriescan also be used as a belt sander• 1400 watt• 125mm wheel• 4.5kg$1791.00Msh 636-1Universal die grinder forapplications in difficultto reach areas.• Narrow neck forinterior applications• Safe machine control.• Spindle with multiplebearings for quiet operation• 280 watt• 28,000 rpm• 1.5 kg0800 654 030$899.00$1445.00Msfv 649Long-necked angle grinder with M 14spindle for working in difficult to reachareas.• Very flat drive head, includinggrinding disc.• Two-handed machine for safe andeasy handling• 750 watt• 125mm wheelALL PRICES EXCLUDEGST, E & OE27

The FEIN rapid clamping system QuickINensures that the disc is safely clamped atall times. EBS drastically reduces the risk ofinjury when the angle grinder is put down,adds not a single gram of extra weight and iscompletely maintenance and wear-free.Always the right tool: the Feinangle grinders offer the rightequipment and accessories forevery application. The modelsWSB 20-180 and WSB 20-230offer all FEIN safety and luxuryfeatures with EBS and QuickIN,while WSG 20-180 and WS20-230, with the M 14 spindleand extremely flat drive head,are also capable of workingin the most confined areas. Inaddition, the 2,500 Watt FEINsafety angle grinder WSB 25is also available for heavy-dutygrinding and cutting tasks.The HIGH-POWERGrindersfrom FEINChanging discs is simplicity itself: Open theclamp lever. Unscrew the clamping unit.WSG SERIES• Swivel Rear Handle• M14 Thd for Cutting & GrindingWheels, Wire Brushes etc.All-round freedom of movement.WSB SERIES• QuickIN Rapid Clamp• EBS Electric Brake System• Swivel Rear Handle• Cutting & Grinding Wheel onlyReplace the disc and replace the clampingunit. Close the clamp lever. And that's it.Complete control, in every position.FEIN angle grinders avoid any unnecessaryrisk of injury from the very outset. The gentlestart ensures recoil-free starting. The self-startstop prevents the tool reactivating following anunplanned interuption of the power supply. Inthe case of the WSB 20 with the electric brakingsystem, EBS, the disc is brought to a standstillin less than 3 seconds when switched off.ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE28 0800 654 03028

AT A GLANCEEfficient angle grinder in the 2000Wclass with M 14 spindle.• HIGH-POWER-MOTOR with enormoustorque for high grinding capacity.• Self-start lock prevents uncontrolledreactivation following power supplyinterruption.• Gentle start for recoil-free andsafe starting.• For all grinding, sanding, cutting and brushing applications.• Flattest drive head in this performance class.• Rear handle can be rotated through 4 positions• Coolant air management offers optimum protection against dust.• Quick release swivel guard.• Auto-stop carbon brushesFEIN WSG SERIES ANGLE GRINDERWSG 20-180 WSG 20-230Wattage 2000 2000Speed 8500 6600Weight 4.5 4.5Wheel Size 180mm 230mm$490.00$490.00AT A GLANCEAngle grinder with EBS is settingnew scales of performanceand safety in the 2000 wattclass• Electric EBS braking systemstops the discs in less than 3seconds.• The braking system is wear-freeand maintenance-free• HIGH-POWER-MOTOR with enormous torque for high grindingcapacity.• FEIN rapid attachment system QuickIN for fast, simple and reliabledisk changes with no tools required• Self-start lock prevents uncontrolled reactivation following powersupply interruption.• Gentle start for recoil-free and safe starting.• For all grinding, sanding, cutting and brushing applications.• Rear handle can be rotated through 4 positions• Coolant air management offers optimum protection against dust.• Coolant air management offers optimum protection against dust.• Quick release swivel guard.• Auto-stop carbon brushesFEIN WSB SERIES ANGLE GRINDERWSB 20-180 WSB 20-230Wattage 2000 2000Speed 8500 6600Weight 4.5 4.5Wheel Size 180mm 230mm$569.00$569.00WSB 25-180x WSB 20-230xWattage 2500 2500Speed 8500 6600Weight 5.4 5.4Wheel Size 180mm 230mm$699.00$699.000800 654 030ALL PRICES EXCLUDEGST, E & OE29

FEIN HIGH CYCLESYSTEM FORAPPLICATION WHEREORDINARY TOOLSDON’T LAST.What does high frequency mean?In electrical engineering, frequencies above 10 kHz are describedas high frequency. But for power tools this term is commonly usedto describe all frequencies above the standard mains frequency of50/60 Hz. Modern high frequency power tools usually operate at afrequency of 300 Hz.Achieving this level requires special generators that bring the powerup to the higher frequency. These frequency converters are connectedto the national three phase grid. Dimensioning and installation can becarried out by any professional electrician.In many areas of industry and manual trades where power tools areexpected to deliver maximum performance for extended periods, FEINhigh frequency prove their superior machine design.Metalworking and metal machining tasks like heavy duty grinding,rough machining and separating demand the upmost reliability frompower tools. High frequency power tools from FEIN have high powerreserves - on average around 100% more than the rated power. Speedremains constant across the entire load range. That means you canwork with optimum peripheral speeds, high grinding power andminimum wear to the grinding disc.Because of the design and concept, FEIN High Cycle Motors are totallysealed against dust, with large alloy fan sucking in air at the rear andforcing around the outside of the motor. This is ideally suited for foundriesor especially where there is an extremely dusty atmosphere which shortensthe life considerably of ordinary air and electric tools.Another key requirement - maximum robustness and durability isfulfilled by special design features. Induction motors with squirrel cagerotors have no rotating coils or other wearing power transmitting partslike commutators or carbon brushes. The sealed dust proof motorwith surface cooling prevents any dirt from penetrating into the motor,reducing maintenance requirements and costs to a minimum.Compared with pneumatic tools and power tools with universal motors,there are a whole range of advantages:• Simple, robust power tool construction for extremely long life• High effective output• Low loss of speed under load, ie; very consistent speed for evenworking results• High torque • Low wear • Low operating and energy costs• Low maintenance and repair costs • Low tool wear• Low system maintenance requirementsALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE30 0800 654 03030The above chart shows the massive output difference under load of highcycle tools. Because of the overload capacity and design, FEIN High Cycle arealmost impossible to stall, ideal for heavy grinding and cutting applicationsas well as polishing stainless.

FREQUENCY CONVERTERSOPTIONSNEWKSRThere are 9 options of capacity for the KSR converters. Based on thequantities of tools being used at once is what size converter is installed.These are hard wired into your factory and are designed to have wiring tomultiple work stations.FEIN frequency converters are vitually maintenance free. As a guide, themaintenance interval for the ball bearings is approximately 20,000 operatinghours. The frequency converters are easy to install. The installation sitesimply requires good ventilation (max. air temperature + 40˚ C). Werecommend installing units of 4 kVA and above on anti-vibration buffersto minimise vibrations.High Frequency Tool Option Grinders Die and Straight5000 to 18000 rpm optionsHSFThe introduction of the new HFS Static Converters makes the FEIN HighCycle System all the more attractive. Absolutley ideal for smaller fabricatorswho want to avoid a permanent installation and associated costs. Perfectfor moving your high cycle tool around the factory and site work! Just plugit into 230 volt and you get 300 hz/200 volt out the other end. Designedfor single tool use and with 2 size options available depending on tool used.Heavy alloy housing designed for taking the knocks.Angle Grinders and Polishers0800 654 030ALL PRICES EXCLUDEGST, E & OE31

FEIN Core Drilling forthe Highest DemandsAT A GLANCE• Fast retooling due to the revolutionary QuickIN system• Core drilling, full drilling, tapping, reaming and countersinking - allwith one power tool.• Robust and precise twin dovetail design for high stability and extremelylong life.• Increased safety for user and tool due to self-startprevention lock, overload cutout and strong magneticadhesion.• Intergrated cooling lubricant supply for clear cut andlong service life of the tool.ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE32 0800 654 03032

New Model - Super Compact!World's smallest Morse taper drillFEIN gets to the core:Do your drilling more economically and faster.KBM 52 UEquipped with variablespeed and reverse the KBM52U is the most versatilemag drill in the world. Withcore drilling up to 50mm Øand twist drills up to 22mm- you wont believe it onlyweighs 13.7 kg.• 1200 watt• 2 speed 130-260/260-520rpm• 1100kg magnetic adhesion• Adjustable stroke for extrathroat depth• M16 Tap capacity• New designed coolant tankallowing for horizontal use• No 3 Toolholder for core drillsincludedIncluded in the delivery: 1 storage box, 1 coolant tank,1 swarf hook, 1 QuickIN adaptor for M 18x6 P 1.5, 2centering pins, 1 FEIN high-performance cutting oil spray,1 expulsion block.KBM 65 QAn excellent example ofprecision and perfect tohandle is the KBM 65Q, the largest of FEIN'score drilling units. Drillingholes of up to 65mm Ø insteel poses no problemfor the high-power 1400W motor. Two additionalelectronic gears allowuniversal applicationwithout having to makeany compromises.• 4 speed - 125/250/255/510rpm• Magnet size 92 x 184mm• 1200kg magnetic adhesion• No. 3 morse taper• 23mm Ø twist drill capacity• 19.8 kg$3990.00KBM 32 QIts compact dimensions andlight weight of just 10kgmake the KBM 32 Q an idealpartner for mobile drillingup to 32mm Ø and a drillingdepth of up to 50mm.• 700 watt• 440 rpm• Magnet size 80 x 160• 900kg magnetic adhesion• Adjustable slide for extra heightIncluded in the delivery: 1 carryingcase, 1 cooling lubricant pump, 1safety strap set, 1 chip hook, 1 geareddrill chuck, 1 QuickIN adaptor for M18x6 P 1.5, 2 centering pins, 1 set ofwrenches$2550.00KBM 50 QThe KBM 50 Q for drilling jobs of up to 50mm Ø isthe lightest drilling unit in the performancecategory. With a 1200 W, high-powermotor and 2-gear transmission it is theright partner for optimum speedsin all applications• 2 speed - 260/520 rpm• Magnet size 90 x 180mm• 1100kg magnetic adhesion• 12.0 kg• Adjustable slide for extraheight$3399.00Included in the delivery: 1 carrying case, 1 coolinglubricant pump, 1 safety strap set, 1 chip hook, 1geared drill chuck, 1 QuickIN adaptor for M 18x6 P1,5,2 centering pins, 1 set of wrenchesIncluded in the delivery:1 carrying case, 1 cooling lubricant pump, 1 safetystrap set, 1 chip hook, 1 geared drill chuck, 1QuickIN adaptor for M 18x6 P 1,5,2 centering pins,1 set of wrenches,1 swarf guard $4899.000800 654 030ALL PRICES EXCLUDEGST, E & OE33

DrillingPerfectionThe perfect solution is never achieved by compromising. This is why theFEIN principle for drilling is not "one for all", but instead a wide range of highperformance power tools, each ideally geared to very specific applications,jobs and work conditions. For this reason there is a large number of differentFEIN hand drills: from the lightweight single- and two-speed hand drillswith kinetic handles, pistol handles or spade handles, to robust two-sppedand four-speed drills with two side handles, as well as the particularly costeffectivecore-boring units for larger bore diameters.AT A GLANCESmall lightweight hand-helddrill with ideal power - weightratio• Optimum speed for smalldrilling applications• Corner width only 21mmfor working at difficult-toreachareas.ASy 630• 200 Watt• 5,000 rpm•4mm ø in steel• 8mm ø in timber$555.00AT A GLANCECompact two-speedhand-held drill.• High motor power forreliable operation• Variable electronic speedcontrol for sensitive initialdrilling and screwdriving.• Mechanical gearbox foroptimum adjustment forthe task at hand.DSkeu 636• 320 Watt• 2 speed reversible 0-700/0-1900 rpm• 10mm ø in steel• 25mm ø in timber$945.00AT A GLANCEFour-speed drill with optimum speedadjustment• Extremely robust for heavy dutyapplications.• Mechanical gearbox foroptimum adjustment for thetask at hand.• Morse taper with preciserotation as universal drillholder.AT A GLANCEHigh performance two-speed hand-helddrill with spade handle.• High motor power for reliableoperation• Mechanical gearbox for optimumadjustment for the task at hand.• Spade handle and additional handlefor optimum handlingDSe 648• 740 Watt• 260 - 600/640 - 1400 rpm• 3.3 kg• 16mm ø in steel• 40mm ø in timber$1475.00DDsk 672-1• 1050 Watt• Reversible, 4 speed175/280/ 480/760 rpm• 10 kg• 32mm ø in steel• 60mm ø in timber• No. 3 M-T$3300.00ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE34 0800 654 03034

FEINHandyMaster:Setting new standards fordesign and ergonomics.The four FEIN HandyMasters not only look prettygood, but they're quite impressive as well whenthey're hard at work. The small 9.6V machine countsas one of the lightest and most handycordless drill/drivers in the world. Andthe 18V model as one of the mostpowerful. The exceptional ergonomicsis common to all. The vibrationreducingsoftgrip and the goodweight balance make it a pleasurework with a FEIN HandyMaster.Drilling or screwdriving far awayfrom a power outlet has neverbeen so easy.HandyMaster ABS 9The small one for perfect results:light and handy cordless drill/driver with 9.6V and up to 1.4Ahcapacity. Drilling in steel up to ø10mm, in wood up to ø 20mm,screws up to 5mm ø.• 0-600 rpm• Only 1.4 Kg• Supplied with carry case with2 batteries• Torque adjustable• Reversible$379.00HandyMaster ABS 12For greater challenges: the 2-gearmachine with 12V and up to 2Ahcapacity. Drilling in steel up to ø13mm, in wood up to ø 30mm,screws up to 7mm ø.• 0-400 / 0-1,400 rpm• 2.0 Kg• Supplied with carry case with2 batteries• Torque adjustable• Reversible$589.00HandyMaster ABS 14Identical to ABS 12, but withgreater performance: 14.4V.Drilling in steel up to ø 13mm, inwood up to ø 32mm, screws upto 8mm ø.• 0-400 / 0-1,400 rpm• 2.1 Kg• Supplied with carry case with2 batteries• Torque adjustable• Reversible$679.00HandyMaster ABS 18Pure power: the 2-gear machinewith 18V and up to 2Ah capacity.Drilling in steel up to ø 13mm, inwood up to ø 50mm, screws upto 10mm ø.• 0-400 / 0-1,400 rpm• 2.9 Kg• Supplied with carry case with2 batteries• Torque adjustable• Reversible$770.000800 654 030ALL PRICES EXCLUDEGST, E & OE35

Perfect SawingAT A GLANCEJigsaw for heavy-duty sawing applications in woodand metal.• Variable, electronic stroke speedcontrol for optimum cutting speed.• Especially suitable for sandwichmaterials and stainless steels.• Automatic coolant/lubricant feed withintergrated tank.• Can be converted for beam turningwith large foot plate.• Air-jet feature for unobstructed viewof the cutting line.ASte 649-1• 750 Watt• Variable speed 750-2600 strokes• 26mm stroke$3335.00Jigsaw up to25mm in Steel / 100mm in WoodHacksaws for pipes up to Ø 440mmALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE36 0800 654 03036STS 325 R• Pneumatic version of the AStx 649$6120.00AStx 649• 750 Watt Motor• 350 Strokes per min.• 60mm stroke length• Cutting capacity -profiles 290(w) x 550(h),440mm Ø pipes (with chain extension)$5820.00AT A GLANCEPowerful hacksaw for pipes and profiled sections• Ideally suited for trimming pipesand shaped section made ofsteel, cast-iron, autoclaved aeratedconcrete and plastics.• Clamp and feed device available for profiles andpipes from Ø 80mm to Ø 400mm• Adjustable clamping devices permit mitre cutsup to 45 0 as well.• Especially suitable for sandwich material andlayers of different materials.for AStxe 649• Variable electronic speed control for optimumcutting speed.for STS 325 R• Pneumatic powered

Sheet metal workingto the max.Slitting Shears, up to 2.0mm• warp-free cut with just one chip.• Excellent ergonomics and low weight.• Open fronted cutting head provides and optimum viewof the cutting line.• 5.0mm cutting width.BSS 1.6 BSS 2.01.6mm sheet 2.0mm sheet0.8mm stainless 1.3mm stainless$1515.00 $1840.00There is hardly any application that FEIN power cutting toolsare not cut out for. They cut metal, alloys, non-ferrous metalsand thermoplastic in varying thicknesses and degress ofhardness, corrugated sheet metal / sheets with trapezoidalcorrugations as well as well as steel plates and rigidly bondedpolyurethane connections.The FEIN sheet metal shears are used in ventilationinstallation, in air conditioning, for insulation work, and insheet metal working shops for trimming sheet metal. Theircapacities can be best read at their high cutting speeds. Justas easy it is to choose a sheet metal shears, it is to make theright choice for a nibbler for the respective application. In anycase the FEIN nibbler is employed there where particularlydificult, yet precise cuts have to be made.Sheet Shear, up to 4.2mm• Excellent ergonomics and unrestricted view of cutting line.• Good curve precision with low sheet metal distortion.• Comfortable and fast when trimming and cutting to shape.• For sheet metals up to 800 N/mm 3 and stainless steel.• HIGH-POWER-MOTOR for unmatched performance and durability.BLS 1.6x BLS 2.51.6mm sheet 2.5mm sheet1.0mm stainless 1.6mm stainless$1365.00 $2040.00BLS 3.5 BLS 4.23.5mm sheet 4.2mm sheet2.0mm stainless 2.0mm stainless$3810.00 $4100.00Nibbler, up to 5.0mm• Warp-free cutting• High cuting speed for rapid work• HIGH-POWER-MOTOR for unmatchedperformance and durability.BLK 1.3t BLK 1.61.3mm sheet 1.6mm sheet0.6mm stainless 0.8mm stainless$1220.00 $1220.00BLK 2.02.0mm sheet1.0mm stainless$2125.00BLK 3.5 BLS 5.03.5mm sheet 5.0mm sheet1.8mm stainless 2.5mm stainless$3630.00 $5180.000800 654 030ALL PRICES EXCLUDEGST, E & OE37

FEIN eccentric sander Msf636-1 - for enduring highpower and flawless sandingperformance.The MSf 636-1 isn’t just highly robust. With an eccentric stroke of 8.4 mm,it also offers better material removal than the vast majority of eccentricsanders. The large stroke also creates a very even, smooth surface, theoptimum starting point for applying high-quality paint coatings to fibreglassor wooden yachts. The FEIN eccentric sander MSf 636-1 is especiallysuitable for boatyards that paint boats and yachts.FEIN BENEFITSAnti-foul removalHeavy timber sanding• Extra strong eccentric stroke meansexcellent sanding capacity for surfaceslarge or small• Hole pattern on sanding sheets, backingpad and pad edge makes for perfectdust extraction• Slimline motor for good handling• Durable metal gear head• Sanding sheets with hook and loopfastenings• Carbon brushes with self-cutofffunction• 380 Watts • 7,500 rpm • 32mmø hoseconnection • 274mm OAL • 150mmdia pad • 1.7kgFEIN DUSTEX -DESIGNED TOMORE THANKEEP UP!The powerful dust extractors of the FEIN DUSTEX range are the ideal complement to the powertools of the FEIN Marine range with their low levels of dust production. The convenient automaticon/off function switches these professional and exceptionally quiet wet/dry dust extractors on andoff via the switch on the connected power tool.AVAILABLE FROM SEPTEMBER 09Technical data Dustex 25 Dustex 40Power consumption/rating 1300 watts 1500 wattsAir flow rate3300 l/min 3600 l/minMax. vacuum 230 m/bar 270 m/barTank volume 24 l 35 lMax. connected rating 2,000 watts 2,000 wattsWeight 7 kg 9 kgCable with plug 6 m 6 mSuction hose 5 m 5 mALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE38 0800 654 03038

FEIN MULTIMASTERThe universal system for interior work and renovationUnique expertise, versatile performance:The new FEIN MULTIMASTER generation can do more.As the inventor of the electric drill, FEIN has been developing innovative and unbeatablyefficient solutions for all kinds of uses, both under heavy duty industrial conditions andin DIY applications.We use this expertise to improve the oscillating FEIN MULTIMASTER systemcontinuously. So that you can meet all the demands made during the working day toperfection, we are constantly adding new and innovative accessories to the range.Technical DataPower input250 wattsOscillations11,000 - 21,000 rpmCable5 mSanding pad, corner to corner 80 mmTool mountingQuickIN** Only for FEIN MULTIMASTER SELECT and TOPIn the lead thanks to oscillation technology:• Unsurpassed versatility in its applicationthanks to the oscillating action.• Perfectly smooth running when sandingand rasping - even into cornersand edges.• Up to 21,000 oscillations per minuteQuick-action technologyThe new QuickIN rapid change system enables tool-freeaccessory changes, saving time, offering comfort andfacilitating the use of different accessories.Perfect handlingThe FEIN MULTIMASTER’s new ergonomic shape makesfor particularly comfortable handling. Design and operatingelements are perfectly adapted to the working processesand therefore guarantee safe, fatigue-free workwith the minimum of effort. The new SoftGrip insertensures optimal grip.In the lead thanks to oscillationtechnology:• Unsurpassed versatility in itsapplication thanks to theoscillating action• Perfectly smooth running whensanding and rasping - even intocorners and edgesUp to 21,000oscillations per minute0800 654 030ALL PRICES EXCLUDEGST, E & OE39

Just the right one for everyone:the FEIN MULTIMASTER setsFEIN MULTIMASTER accessories areconstantly optimised and extended.New Universal E-CUT saw bladeThe tried and tested universal E-CUT sawblade is now also available in the wider 44mm design. The saw blade can also beused with or without depth stop.1. FEIN MULTIMASTER STARTFor beginners, who do not want to sacrifice professionalism in spiteof being price conscious.• 1 FEIN MULTIMASTER FMM 250• 1 sanding pad• 5 of each type of sanding sheet, grain 80, 120 and 180,• 1 universal E-CUT saw blade• 1 rigid stopping knife$495.00• 1 key and mounting boltsHSS saw blade for woodPerfect for cutting out laid parquet,laminate or wall coverings: the round HSSsaw blade turns the FEIN MULTIMASTERinto an oscillating “mini circular saw”.MINICUT and file setWith the new carbide file insert for theMINICUT and file set, grooves can befiled out cleanly – and wood and plasticcompletely deburred.2. FEIN MULTIMASTER SELECTFor everyone, who expects professional tools and results and wantsto use the complete application range for interior fi ttings andrenovation.• 1 FEIN MULTIMASTER FMM 250 Q with QuickIN quick-actionComplete accessories of the Start equipment and• 1 Carbide-tipped segment saw blade• 1 HSS saw blade$695.00Table and drill jig supportWhen the FEIN MULTIMASTER is fixed to atable or workbench, the work piece can beapproached exactly.Suitable for all commercially available drilljigs.3. FEIN MULTIMASTER TOPThe all-round carefree package with which all applications can becarried out professionally in interior fi ttings, renovation and hobbies– from floor work to renovating windows.• 1 FEIN MULTIMASTER FMM 250 Q quick action system in a sturdyplastic caseComplete range of accessories of the START equipment and• 1 sanding pad, perforated• 5 of each type of sanding sheet, grain 80, 120 and 180, perforated• 1 dust extraction device• 1 carbide rasp, perforated• 1 Profile sanding set$849.00ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE40 0800 654 030404. FEIN MULTIMASTER TOP EXTRAHow can we make the TOP-Model even better? By also supplying theclean work site at the same time with FEIN DUSTEX II.• 1 FEIN MULTIMASTER FMM 250 Q quick action system in a sturdyplastic caseComplete range of accessories of the TOP equipment and• FEIN DUSTEX II set for dust-free workIncluded in the set: 1 suction hose 5 m, Ø 36 mm; 1 fl oor nozzle;2 extension pipes; 1 fl at nozzle; 1 upholstery nozzle; 1 adapter forFEIN power tools, 1 universal power tool adapter; 1 filter bag$1495.00

1. Cutting floor coverings:With the convex segment bladeyou are even able to cut rigidmaterial, such as plastic orcarpet simply and without anyproblems.2. Removing floorcoverings / adhesiveresidues:Carpet adhesive residues,coatings or other stubbornmaterials do not stand achance against the rigidstopping knife.3. Altering door jambsexactly:The E-CUT saw blades with thehighest precision and cuttingspeed will impress you when itcomes to altering door jambsfor higher floor coverings, aswell as for recesses in parquetand laminate.Perfect for work covering floors: the FEIN MULTIMASTERcaters for the entire range of tasks when it comes to floors –from effortlessly removing old floor coverings, such as carpet or PVC tocutting parquet, laminate, floor strips and door jambs to shape, rightthrough to sanding parquet flooring accurately into difficult corners andedges. The FEIN MULTIMASTER saves you a great deal of time andeffort in all operations with its accessories that are specially developedfor individual applications.FEIN MULTIMASTER FlooringRestore your floors and gainground in no time at all.4. Trimming parquet andlaminate:Whether parquet or laminateor composite materials, theuniversal E-CUT saw bladeenables everything to be cutexactly and appropriately forthe particular material.5. Sanding down parquet:Where others cannoteven perform, the FEINMULTIMASTER will impress youwith its sanding equipment,high sanding capacity andconsistent results.6. Sawing out floor strips:It is possible to saw out fittedfloor strips without damagingthe wall and floor, therebyavoiding time-consuming touchupwork.7. Sawing shadow joints:The HSS saw blade for woodturns the FEIN MULTIMASTERinto an oscillating “mini circularsaw”, – ideal for long, exactcuts, e.g. for expansionsealants in parquet andlaminate.Can be used with or withoutdepth stop.0800 654 030ALL PRICES EXCLUDEGST, E & OE41

FEIN MULTIMASTER - RenovationA safe bet for windows, and the number one for doors.Windows, garage doors and outdoor installations can berenovated perfectly with the FEIN MULTIMASTER.Windows are coarse sanded with a grain of 40 or 60. After this, smooththe surface in a second operation with grain 150 or 180, and achieveexcellent results in next to no time. You are best using the carbiderasp for heavily weathered surfaces. Using this coarse sand withapproximately 5 times the sanding capacity. Even brittle puttied edgescan be removed quite simply and without any danger of glass breakage.The result is completely renovated windows in a surprisingly short spaceof time.1. Sawing pipes flush tothe wall:Ideal for dismantlinginstallations that are no longerrequired. Using the universalE-CUT saw blades the pipesare clipped off for subsequentgrouting flush to the wall.2. Trimming and alteringplasterboard:With the E-CUT saw bladesplasterboard can be trimmedand cut-outs made so easily forelectrical installations etc. insheets that have already beenfitted.3. Working right into everycorner:Renovate very old windowsperfectly and work effortlesslyright into the corner with theHSS segment saw blade; timeconsumingrework is no longerrequired.4. Removing glass andputty:Brittle puttied edges can beremoved without any problemand without any danger ofglass breakage.5. Sanding down signs ofweathering:With the carbide rasp, removeeven stubborn signs ofweathering thoroughly and alsovery quickly thanks to the highsanding capacity.Order number6 37 31 001 01 46. Profile sanding:The FEIN MULTIMASTER withthe profile sanding set isideal for sanding garage doors,tongue and groove boardson houses and other concaveand convex profiles.ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE42 0800 654 03042

FEIN MULTIMASTER - TilingAchieve clean results more quickly in bathroomsQuick and economic for bathroom and kitchen renovation.Using the FEIN MULTIMASTER you are able to replace individual,defective tiles purposely, without damaging the surrounding tilingwork. With the diamond saw blades or the carbide segment blades,the FEIN MULTIMASTER cuts tile joints with the utmost precision andthe minimum of dust. The old tile adhesive can then be convenientlyremoved with the carbide rasp or stopping knife blade.1. Removing tile joints:The segment saw blade is usedfor removing defective tile joints incorners and on edges that enablesaccurate work without overcutting.The segment saw blade is availablein carbide or diamond quality; thelatter will impress you with its noticeablyhigher service life and is alsosuitable outdoors for frost resistantsealant materials containing epoxyresin, or for replacing joints.2. Sanding supportingsurfaces flat:The carbide rasp is the allroundaccessory for tiling. It smoothesadhesive glue, sands tiled edgesand ensures a flat supportingsurface.3. Removing elastic sealants:The flexible stopper knife is perfectfor removing elastic materials,such as sealants, adhesiveresidues or paint, not just inbathrooms.With the FEIN MULTIMASTER you have the ideal tool forassembling fitted kitchens and furniture.Even difficult operations in the tightest of spaces, such as sawing recessesin elements that have already been assembled can be carried outaccurately and without difficulty. When restoring furniture, previously timeconsumingmanual work, such as profile sanding,can be accomplished farmore quickly and efficiently with the FEIN MULTIMASTER.1. Profile sanding:The replaceable inserts of theprofile sanding set enable youto sand in cramped spaces, ingrooves and on profiles comfortablyand with considerablygreater sanding capacity.1. Recesses for cable andpipe access:Make way for cable inlets, socketsand water connectionsin cupboard and shelf wallsusing the E-CUT saw blades –without time-consumingdismantling.FEIN MULTIMASTER - InteriorsAlways accurate - even in tight spaces0800 654 030ALL PRICES EXCLUDEGST, E & OE43

FEIN MULTIMASTER - MarineDefinitely one to take on board.Indispensable for applications on the sea:with the FEIN MULTIMASTER you achieve noticeably greater efficiencyfor boat building and restoration. Thanks to its high cutting performancethe FEIN MULTIMASTER works perfectly with wood, fibreglass, carbonfibre-reinforced plastic and virtually all other relevant materials, doingaway with manual work and improvised solutions. Installations in tightspaces are no more of a problem than renovating teak decks.1. Finishing and renovatingthe deck:Remove deck sealing materialsquickly and thoroughly with thecutting blades. The time savingis 80% and more when renovatingteak decks.2. Filing recesses:Recesses can be filed exactly toshape with the MINICUT andfile set.3. Repairing hull/floor areas:The round carbide-tipped segmentsaw blades cater excellently forsawing work on fibreglass andcarbon fibre-reinforced plastichulls. You will be happy with theperfectly clean cuts (0.5mm wide)without any cracking or damageto the laminate.4. Adding fittings:The MINICUT blades are exactlyright for working in tight spaces,difficult-to-reach spots or sawingsmall recesses (above 10mm).FEIN MULTIMASTER - HouseThe finishing touch to your home.For hobbies, home and the garden:When sharpening tools, working stone or stone products, layingfoundations or model building down to the finest detail, the FEINMULTIMASTER is efficient, precise and always good for a surprise.Its comprehensive system of accessories open up undreamed ofpossibilities. And of course it will impress you with everything that itdoes, with high cutting and sanding performance, flexible handling andgreat sensitivity..13. Table and drill jigsupport:You are able to fi x your FEINMULTIMASTER with the newtable and drill jig support, towork work pieces accurately.21. Cutting out when modelbuilding:Minimum cuts in the minimumof space – for this you havethe MINICUT and file set.ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE44 0800 654 03044

FEIN SUPERCUTSaw where no other saw can get toPrecise cuts even freely by handare always possible. The E-Cutprecision saw blades ensure cleancross cuts - ideal for trimmingand fitting.E-Cut universalsaw blades are evenoutstanding for metalprofiles and drywall due totheir high cutting speedsSanding in corners and at edges.Use the supplied adaptor toquickly turn the FEIN SuperCutConstruction into a fully-fledgedtriangular sander.Subsequent cutouts into mountedflooring can be done quickly andneatlyTrim door frames perfectly. Theoffset permits sawing flush to thesurface.The FEIN professionalset for carpenters /interior fitters begins a newera of construction: Everythingbecomes easier and faster. In alllocations where circular, sabre, or jigsaws have no chance and a chisel wouldrequire too much manual effort, the FEINSuperCut Construction effortlessly completesthe job in record time. Free space is not requiredalongside or behind the work piece. This often savesyou bothersome disassemblies. Even hard to reach placescan be worked on, because the ingenious E-Cut saw bladecan be attached to the FEIN SuperCut Construction at anyangle for sawing in furniture.The set for carpenter / interior fitters with completeE-Cut selection.• For all construction and sawing work, even in hardto-reachplaces• Brings speed to every construction site.• Sawing without previous disassemblies. No freespace required alongside or behind the workpiece.• High cutting speed and high precision.• Plunge into material just likea mortise chisel.• Clean cuts even by hand; noclamping of the workpiecenecessary.• Convert to a versatiletriangular sander with hignsanding capacity.Simply plunge in without anycomplicated preparations. Thismakes perfect cuts into alreadymounted fixtures possible in thebriefest time.$1695.00The FEIN professional set forcarpenters / interior fittersConsisting of: 1 FEIN SuperCutConstruction in metal tool case; 4E-Cut standard saw blades; 4 E-Cutprecision saw blades ; 1 depth stop;1 adaptor; 1 sanding pad; 5each sanding sheets, grain80, 120, 180; 1 wrench.0800 654 030ALL PRICES EXCLUDEGST, E & OE45

FEIN SUPERCUTRenewing sealantin record timeEven the best joint fillers age and need to be replaced atsome time so that the building structure is not damaged.The extracting is often tedious and srenuous manual job.The FEIN SuperCut Construction with the professional setfor grouting renewers makes it a good deal easier. It can dothe job 60% faster than when using a hand saw or box cutter.All elastic sealants can be removed - in interiors, on facade,or cement floors. The extracting of the damaged materialand the roughening of the flanks for new rejoining isdone with only one one device.For continuous use on floors or facadesan auxiliary handle is included in the setthat makes working with almost no fatiguepossible. In cramped conditions doing interiors,you can work optimally without the auxiliary handle.You can attach a dust extraction device - no tools required- so that pollution is noticeably reduced in the immediatework area. The locally valid national regulations need to bepbserved when extracting sealant materials that are harmfulto health (e.g. containing PCB)Renew sealant/joints fast, cleanly and reliably with theset for sealant repairers.• Rapid work progresses with comparatively littleeffort• Optimal ergonomic design for fatigue-freeworking.• HIGH-POWER MOTOR for supreme preformanceand stability.• Use indoord and outdoors• Vibration-attenuating bail handle for minimisingphysical fatigue.• Tool-free attachable dust extraction device.Deep seamshave been verydifficult to work on byhand - up till now. But thisis no hindrance for the FEINSuperCut Construction with theextended cutter blade.All elastic joint fillers can beconveniently extracted by theuniversally applicable, straightcutter blade. This also makestime calculations possible for largeobjects.Safer working with FEIN: thedust extraction device noticeablyreduces pollution in the immediatework area. The bail handle reducesvibration and makes working withnearly no fatigue possible.The FEIN professional setfor grouting renewersConsisting of: 1 FEIN SuperCut Construction in metal toolcase; 1 bail handle; 1 extraction hood; 5 cutter blades,straight; 1 cutter blade, straight, long; 2 cleaning knife,diamond-coated, straight; 1 wrench.$1895.00The mortar flanks are cleaned androughened before the rejoiningby the diamond-coated cleaningknife.ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE46 0800 654 03046

Cevisa - silent & cool bevellingCevisa from Spain uses the principle of milling opposed to punching to create bevels for welding. This method issilent and creates no heat causing changes in the steel. Without sparks or dust, this method is easily the numberone option over conventional alternatives such as gas or grinding.With the CHP 6 with a capacity for 6mm bevels (not pictured) to the CHP 21/21G with a capacity for 20mm bevels,you can either take the beveller to the the sheet or vise versa. Each model is totaly efficient by hand feeding smallpieces, through to letting the beveller work itself along the side of the sheet.Working with pipes is easy too. Bevelling pipes from 100mm I.D., the Cevisa is truely a versatile performer.With the inclusion now of the CHP 21 INV (not shown) it is possible to do the underside of a sheet without havingto flip it over - again saving time.CHP 12 FIXED ANGLE OF BEVELThis machine performs 2.6 m/minute bevel to receive welding seams with 12mmdepth in plates up to 40mm thickness and 40Kg/sq.mm strength.All machines can be fitted with 22.5º, 25º, 35º, 37.5º, 45º angle varying devices.Motor power3 H.P.Voltage440Volt / 60HzMax. bevel depth with 40Kg/sq.mm materials -12mmMax. bevel depth with 50Kg/sq.mm materials -10mmBevelling angle30 0 suppliedPlate thickness6 to 40mmWeight65 kgMinimum Pipe diameter100mm I.D.* trolley shown not included in priceCHP 21G Adjustable angle from 20 0 - 45 0Motor power4 KwVoltage440volt/ 60HzMax. bevel depth with 40Kg/sq.mm materials -20mmMax. bevel depth with 50Kg/sq.mm materials -16mmBevelling angle adjustable 20 0 - 45 0Plate thickness9 to 50mmBevelling tubes: min inner Ø150mmNet weight of machine370KgPrice subject to application - call to discuss today0800 654 030ALL PRICES EXCLUDEGST, E & OE47

ALFRAInvest in a proven brand• Made in Germany• Purpose built motors on purpose built stands, not a mix & match.• Updated and ergonomic design - reducing weight and increasingcapacity.• Advanced technology resulting in a high power to weight ratio.• Core drilling, tapping, reaming - all with one power tool• Stands with adjustable slides for huge stroke enlargement.• Intergrated coolant system for longer cutter life.• Imported in NZ since 1990, backed up with a full spareparts facilityPICCOLO 32/50With its extremely compact design and light weight the32/50 can still handle a 32mm ø hole up to 50mm deep• 1050 watt• 400rpm• Magnet size 70 x 160mm• 800kg magnetic adhesion• Adjustable slide for extra throat depthSupplied with:carrying case, coolant tank, cutting fluid, 13mmchuck & key, safety strap, 18mm cutter,ejector pin$2199.00BONUSc/w 1 x 7 piececutter set worth$280.00with eachmachineMINI 40/2The Mini 40/2 is so reliable that it hasn't changed for 13 years. With a 40mm ø capacity drilling50mm deep it is the best option for structural steel and excellent for site work.• 1200 watt motor• 140mm stroke• Weighs 14.5kg• Magnet 92 x 200mm• 1,200 kg magnetic adhesion$2550.00• 2 speed 280 and 500rpm• Intergrated coolant system no extra attachment• Very short spindle to reduce the risk of shaft wobbleSupplied with:carrying case, coolant tank, cutting fluid, 13mm chuck & key, safety strap, 22mm cutter, ejector pinALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE48 0800 654 03048

Rota-Quick fasttool-free chuck – no Allenkeys neededBONUSc/w 1 x 7 piececutter set worth$280.00with eachmachineNew magnet system – 3coils means an increase inadhesion of at least 30%Control panel easily visuallylocated, even wheninside narrow U&H beams32RQAn updated version of the 32/50 with an easier to use touch panel, quickrelease cutter system, 38% increase in magnetic adhesion - the 32RQ isa very well speced machine• 32mm ø capacity, 35mm deep• 900 watt$2495.00• 450rpm• Magnet size 70 x 180mm• 1100kg magnetic adhesionSupplied with carrying case, 18mmø cutter,safety strap, coolant tank, chuck & key, swarfhook40RQFor drilling up to 50mm dia and 50mmdeep, the 40RQ is also excellent for usingfull size twist drills up to 13mm becausethe unique adjustable slide design. With thesloping switch panel operation is easy fromeither side.• 1200 watt motor• Adjustable stroke• Weighs 16 kg• Magnet 80 x 230mm• 1,600 kg magnetic adhesion $2990.00• 2 speed 250 and 450rpm• Spoke handle can be changed from side to side• Intergrated coolant system, no extra attachmentSupplied with carrying case, coolant tank, cutting fluid, chuck & key, safetystrap, swarf hook0800 654 030ALL PRICES EXCLUDEGST, E & OE49

No.3 Morse Taper for excellentversatility • Rotobest 60 & 100ROTOBEST 60With a 75mm dia core drill capacity theRotobest 60 is the lightestdrilling unit on the market at only 22kg. With the 4 speed gearboxyou can tap, ream and drill effectivelyThe swivel magnet makepositioning a dream and the adjustableslide for using drill bits upto 32mm dia.• Powerful 1800W motor with clutch• 4 speed gearbox - 100, 175, 245,385 to suit whatever size you aredrilling• Weighs only 22kg• Magnet size only 80 x 230mm fornarrow areas – 2000 kg magneticadhesionControl panel easily visually• No. 3 morse taper output – no located, even when insidewastage of your existing twist drills narrow U & H beams• Coolant system to be used withcoolant tank supplied• Swivelling magnetic base for easeof use – 330˚ L & R swivel and10mm backwards and forwards $3990.00ROTOBEST 100With a 100mm dia core drill capacitythe Rotobest 100 is one of the highestcapacity drills on the market and atonly 28 kg. With the 4 speed gearboxyou can tap, ream and drill effectivelyThe swivel magnet make positioning adream and the adjustable slide for usingdrill bits up to 32mm dia.• Powerful 1800W motor with clutch• 4 speed gearbox - 110, 175, 245, 385 to suit whatever size youare drilling• Weighs only 28kg• Magnet size only 80 x 230mm for narrow areas – 2000 kgmagnetic adhesion• No. 3 morse taper output – no wastage of your existing twist drills• Coolant system to be used with coolant tank supplied• Swivelling magnetic base for ease of use – 330˚ L & R swiveland 10mm backwards and forwardsALL PRICES EXCLUDEGST, E & OEContinuouslyadjustable slide fora maximum strokeenlargement, whenusing twist drills anddrill chucks andtapping attachments.New magnet system – 3coils mean a 11% increaseof magnetic strength,2,000 kg for working onthinner materialsSupplied with: carrying case, coolanttank, safety strapSupplied with: Steel carrying case,coolant tank, safety strapBONUSNo. 3 MT tool holderworth $334supplied free$5130.0050 0800 654 030

ALFRA'S answer to thoselow head room areas the.....V32Suitable for confined spaces,everywhere, where it‘s poky.Infeed via ratched lever.Changeable for right and lefthand operation.Spur gear for robust application.Good view from operator side todrilling tool.• Horizontal Metal Core Drilling Machine for the pokiestspaces. Perfect to use, where regular Metal Core DrillingMachines have to quit due to their height.• Application areas:Steel construction (in between girder flanges), vehicleconstruction (truck frames), bridge construction, towerconstruction, tunnel construction, tersely everywhere, whereit´s poky ...• The total height is just 227 mm and can even be reduced to185 mm by removing the handle.• The spur gear unit is designed for an industrial use andthe down feed is carried out by means of a ratchet lever.Switchable from right to left hand operation.• Another advantage: the design of the angled gear unitensures a permanent lubrication and avoids a dry running.ALFRA ROTABEST V32• 32mmØ core drill capacity• 25mm cutting depth• 32mmØ countersink capacity• 900 watt motor• 450 rpm• Intergrated internal cooling• Magnet size 95 x 200mm• 1600kg magnetic adhesion• Weight 12.5kg• Uses standard (Weldon) shankcutter!$2590.00Robust gear rod guidance.Easy handling:Magnet on – Motor on/off.• 1 Angular Drilling Machine Rotabest® V 32• 1 Coolant unit with hose and nipple• 1 transport case• 1 Allen key for Weldon arbor• 1 safety belt• 1 HSS Co Cutter Ø 18 mm, cutting depth25 mm• 1 ejector pin 6,35 x 70 mm (special forRotabest® V32)• 1 operation manual0800 654 030ALL PRICES EXCLUDEGST, E & OE51

ALFRA & EIBENSTOCKA Powerful CombinationALFRA ROTABEST MAGNETIC DRILL STAND JHB 18590By investing in a JHB 18590 stand you can get the best of bothworlds. If you don't have enough work to justify a core drillingmachine you can either fit your own drill to this stand or with thecombination you use it as a core drill and still have theflexibility of hand held use as well.• 240mm stroke• 45, 60 and 63mmmounting collars available• 1,800 kg magnetic adhesion• Moveable magnet - 10mm forwards and backwards, 330º rotation• Female electrical socket on base allows you to operate via thepanel• Weighs only 18.5kg for easy use (excluding drill)$1990.00CALL US FOR APACKAGE DEAL!EIBENSTOCK DrillEHN32 2.2R/L, EHN 32/4.2Fantastic drills for high torque, low speed applications such astwist drills, tapping, line boring & mixing, with a 1800 watt motorand a clutch, the EIBENSTOCK drills can deliver the torque andpower safely. Made in Germany.EHN 32 2.2R/L• No.3 Morse taper• Variable speed 60-140rpm, 200-470rom• ReversibleEHN 32/4.2• No.3 Morse taper• 4 Speed 110/175/245/385rpm• Non reversible$1695.00$1495.00ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE52 0800 654 03052

ALFRA- DeburringTechnologyI Beam bevelling including the ends -No problem with KFH Tools!Cost reduction:The bigger part of the End Mill´s cutting rangecan be used by moving the End Mill in the collet.KFH 150$1750.00KFH 250ALFRA KFH 250Manually operated model, especiallydeveloped for the processingof bevels (visual bevels) and preparationof weld on large right-angledworkpieces.• An indispensable helper in engineeringand steel construction.• Wide speed range of variousmaterials.• Individual adjustment of millingdepth.• Easy handling and guidingthrough aluminium head.• max bevel width - 14mm (dependingon material)• 1800watt motor• Variable speed 6000-24000rpm• Weight 12.7kg$4990.00• Edge angles: continuously traversableby 30 – 45° – 30° rightand left. Also for radii r = 3.0, 4.0,5.0 by means of Radius- SolidCarbide End MillsALFRA KFH 150With the machine towards the workpiece, where a machined deburring istoo time-consuming.Manually operated device for the deburring (45°) of larger workpieces,profiles, girders, sheet metals, with 90° support.• Manually operated, for 45° bevels.• Optimal guiding and safe operation.• Bevel width 1-5mm (depending on material)• Bevel angle 45°• 1050 watt motor• Variable speed 8000-25000 rpm• Weight 3.5kg0800 654 030ALL PRICES EXCLUDEGST, E & OE53

ALFRA -Choosing the right cutterALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE54 Advantages Best reproducibility 0800 654 03054HSS-Co-ECO GOLD• Suitable for mild steel only• Low cost cutter, excellentfor high, general purposeuseHSS-Co-RBX• Suitable for high-tensilesteel eg, truck chassis• Alfras’ premium cutter forexcellent cutting life• Featured HSS cutters availablein 25mm and 50mm• Use 6mm dia pin• Imperial sizes and stackdrilling type also availableNEW GENERATION HOLE CUTTERSMore cutting-edge breakthroughs from Alfra• Alfra has now developed a completely new generation of coated hole cuttingtools which will open new performance ranges previously unachievable. Thisperformance increase is possible by means of a specially developed coating,Alfra AICrN, which clearly exceeds the abilities of common coatings.What are the features of the new Alfra AICrN coating?• Significantly extended tool-life in systematic tests carried out against othercurrently available coatings.• Specially developed for hole cutters, it has a clearly improved wear resistanceachieved by a higher oxidation stability and a considerably higher elevatedtemperature Design hardness Specially than common designed coatings. This cutting makes geometry it stable and muchmore efficient for applications with extremely high temperature loads.Advantages Immediate centering• The cutting tool metal has a higher cobalt content, allowing for a harder,No running off centretougher cutter whilst giving a thinner wall resulting in faster drilling time.Good concentricityDesign Specially Suitable designed for NC cutting and CNC geometryDesign Advantages Advantages Specially Immediate machines designed of centering cutting Alfra geometryDesign Advantages SpeciallyRotabest Immediate designed cutting geometryNo HSS-Co running centering off Cutters centreAdvantages ImmediateDesign Optimum No centeringGood running regular concentricity off chip centre breakNoAdvantages Good running off centreSuitable Smooth concentricity cutting for NC and guaranteed CNCGood Suitable concentricitymachines Excellent for cutting NC and capacity CNCSuitable machines for NC and CNCGood chip production at eachmachinesDesign Optimum toothregular chip breakDesign Advantages Optimum Smooth Regular regular chip cutting chip flowguaranteedbreakDesign Advantages Optimum Smooth regular chip breakExcellent cutting guaranteed capacityAdvantages Design Specially Smooth designed cutting geometryDesign Minimum Excellent cutting guaranteedGood cross chip cutting section production capacity of chip at eachAdvantages Excellent Immediate cutting centering capacityremoving tooth Good surface chip production at eachNo running off centreAdvantages tooth Good chip production at eachRegular Easy cutting chip flowtooth Good concentricityRegular Low torque chip flowRegular Suitable chip for NC flowand CNCDesign Minimum Minimum cross section energy demand of chipmachinesDesign Minimum removing surface cross section of chipDesign Minimum cross section of chipAdvantages Design removing High hardness Easy surface cutting of tooth due toDesign Optimum regular chip breakAdvantages removingoptimum Easy surfaceLow raw torque cutting material and specialAdvantagesEasy Smooth cutting cutting guaranteedheat treatment Low Minimum torque energy demandLow Excellent torque cutting capacityAdvantages Minimum Long tool life energy demandMinimum Good chip energy production demand at eachDesign High hardness Suitable for of tooth difficult-to-cut due totoothDesign optimum High hardness material raw material of tooth and due special toDesign High hardness Regular chip of tooth flowoptimum due toheat treatment raw material and specialoptimum raw material and specialAdvantages Design heat High treatment toughness Long tool life of cutter due toDesign heat Minimum treatment cross section of chipAdvantages specially Long Suitable graduated tool for lifedifficult-to-cuthardnessAdvantages removing Long surface tool lifeAdvantages Suitable material Low risk for of tool difficult-to-cut break especiallyAdvantages Suitable Easy cuttingmaterial for difficult-to-cutunder rough working conditionsmaterial Low torqueDesign High toughness of cutter due toMinimum energy demandDesignspecially High Industrial toughness graduated scale manufacturing of cutter hardness due tobyDesign specially High toughness of cutter due toAdvantages state-of-the-art Low graduated risk of CNC tool hardness technology break especiallyDesign specially High hardness graduated of tooth hardness due toAdvantagesLow under Best risk reproducibility rough of tool working break conditions especiallyAdvantages optimum Low raw risk material of tool break and especiallyunder Constant rough quality working conditionsheat treatment under rough working conditionsDesign Industrial scale manufacturing byAdvantages Long tool lifeDesign state-of-the-art Industrial scale CNC manufacturing technology byDesign Industrial Suitable scale for manufacturing difficult-to-cutstate-of-the-art CNC technology byAdvantages Best reproducibilityAdvantagesDesignstate-of-the-art materialBest CNC technologyConstant reproducibility qualityConstant qualityHigh toughness Constant quality of cutter due tospecially graduated hardness

ALFRA ROTABEST CUTTER SETSHSS-CO-ECO GOLD CUTTER SERIES-25mm DRILLING DEPTHCutter Sets - designed to save you moneyFor mildsteel drilling$280.007 PIECE SET• One each of: 14mm, 16mm,18mm, 20mm, 22mm, 26mm• One ejector pin12 PIECE SET• Two each of: 14mm,16mm, 20mm, 22mm• One each of: 18mm,26mm• Two ejector pins $360.00ALFRA ROTABEST CUTTER SETSHSS-CO-ROX CUTTER SERIES-25mm DRILLING DEPTH12 PIECE SET• two each of: 14mm,16mm, 20mm,22mm• One each of: 18mm,26mm• Two ejector pins$580.007 PIECE SET• One each of: 14mm,16mm, 18mm, 20mm,22mm, 26mm• One ejector pin$420.000800 654 030ALL PRICES EXCLUDEGST, E & OE55

Drilling machine accessoriesMORSE Taper Tool Holder• For No. 2 & 3 MT• Internal spring assembly• 25mm depth of cut only• Requires external lubrication21085No. 3 MT HOLDER$208.00NO.2 & 3 MT• Internal lubrication for better cutter life• Suitable for 50mm depth of cut cutters• Convert your radial drill to a core drillNo. 2 MT – 18003$334.0021003No. 2 MT HOLDER$197.00No. 3 MT – 18025$334.00Countersinks & Deburrer 90 0• With Weldon shank – 19mm• Another use for your magnetic base drill25mm diameter 40mm diameter$93.90$174.20Hex Shank Tool Holder• 13mm Hex Shank to fit in radial arm drill• 20mm drilling depth• 19mm Weldon shank female fittingNOTE: Not for hand-held use. Must be used in eitherfloor mounted or magnetic base drill.Quick-change toolholder – ROTA QUICK• No.3 morse taper• Internal lubrication for longer cutter lifeEjector PinsTO SUIT 25mm CUTTERS7.1mm dia. – 1925500 $13.006.0mm dia. – 1926500 $13.008.0mm dia. – 2001500 $16.00TO SUIT 50mm CUTTERSNo. 3 MT – 18651$505.006.0mm dia. – 1950500 $13.008.0mm dia. – 2001501 $16.00AS-13$191.0013mm Chucks• Key and keyless varieties available• Comes with Weldon adaptorKEY CHUCK with ADAPTOR– 18107$101.60KEYLESS CHUCK withADAPTOR – 18105KL$109.00Weldon adaptor18105a – 1/2” x 20thd$48.00Coolant Tank• 500ml capacity• With tap, suits all new and old Alframodels18104$102.00ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE56 0800 654 03056

FOR EXTENDED CUTTER LIFE- YOU NEED A QUALITY FLUIDINTRODUCING....ALFRA EDGE PLUS Soluble Cutting Fluid• Suitable for all cutting & machining applications• 4 - 5% concentration for general use, up to 10% forarduous grinding applications.• Available in 5 litre only• Made in England$89.00ALFRA ROTOBEST CUTTING FLUID BIO 2000Prove it to yourself.• When drilling and cutting steel, substantial cost savings are made byusing a robust cutting oil• Alfred Raith GMBH of Germany have been manufacturing steelcutting blades, broaches, punches and drills for over 20 years. Theynow offer their own formulated cutting oil to provide outstandingincrease in cutter life.• Synthetic easy-flowing cutting oil with amazing lubricating qualities• Can be used sparingly - very economical• Suits any steel cutting application, eg: high-tensile, mild, stainless,bisalloy, heat-treated, alloys and copper• Protects against work hardening and corrosion• Doesn't contain hydrocarbons• Chlorine-free and biodegradable• Made in Germany$49.90 $185.00EXTEND CUTTER LIFEUP TO 200%!!TRIGGER BOTTLE 1 LITREBULK PACK 5 LITRES0800 654 030ALL PRICES EXCLUDEGST, E & OE57

ALFRASharpeningMachinePowerpac have a genuine ALFRA Sharpening MachineON-SITE. WE ARE ABLE to provide you with:• Original angles and self-centring chamfering for ultimate cutter performance• Economic and fast repair• Operated by a friendly and experienced saw doctor• Cutters returned hot-dipped for edge protection until next usage• Random drilling spot checks for quality assurance12 to 17mm18 to 27mm28 to 34mm35 to 39mm40 to 50mm$15.00$17.50$22.00$26.00$30.0060 to 70mm $37.00EXPRESS SERVICE –WHEN WE RETURN YOURPROFESSIONALLY SHARPENEDCUTTER, WE’LL INCLUDE A PRE-PAID COURIER SATCHEL FORYOU TO SEND THE NEXT LOT OFCUTTERS FOR SHARPENING.REGULLETING FEE $7.00DOUBLE SKIN CHASSIS?MULTIPLE PLATE?“STACK” CUTTING?Now you can drill straight through multiplelayers of steel plate without having to backout on each layer to eject the "slug".We can turn any of your existingcutters, regardless of size or brand,into a “stack” cutter. We can alsosupply new “stack” cutters onrequest. Stack” cuttingconversion $15.00 percutter.BROKEN CUTTERS?Subject to the extent of breakage, wecan now shorten, retooth and resharpenyour broken cutter to save youmoney. Send those broken cutters tous now for appraisal.IMPERIAL SIZESNeed an imperial size cutter?1/2”, 15 /16”, 1 1 /8”...? *Powerpac can supply you with anyimperial size from 7 /16” up to 2 5 /16”,and up to 50mm deep. *** Other diameters available on request**Deeper cutters available on requestALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE58 0800 654 03058

• 370mm or500mm• 0 0 - 185 0 rangewith 0.2% accuracy• For fast angle setting beforecutting, welding etc.• Digital display for quick reading•• Accurate • Reliable• Robust • ConsistantDIGITAL ELECTRONIC PROTRACTORThe W40 and W60 can measure any angle on the construction site.The flat profiles can measure angles in any direction and measurementscan be taken directly from the construction plans, andthen easily transferred to the desired location on site.High accuracy measurement saves time when youbuild it right the first time. The oversize LCDdisplay eliminates reading mistakescommon with analog models. Thedesign of the profile allowsthe legs to be made longerby simply laying yourbuilders level on theprofile. Measures allangles from 0° - 185°with high accuracy andrepeatability.W40 -370mm leg $395.00 W60 -500mm leg $570.00Shows direction of differencefrom level or plumbDIGITAL ELECTRONIC LEVELSShows direction of differencefrom level or plumbDegrees and percentLarge LCDdisplay turnsupside downautomaticallyfor easy overheadvisabilityRobust aluminium profile withV-groove for round surfacesDIGITAL ELECTRONIC LEVELS• Complete range of digital electronic levels available from250mm to 1800mm• Audible signal at 0 0 & 90 0 for quick checking• LCD display turns upside down automatically for easy overheadreading• If dropped it can be calibrated on site by yourself• Accuracy 0.1 0 %• Made in SwitzerlandP250 - 250mm $295.00P250 - 250mm with magnet $305.00P350 - 350mm $305.00P600 - 600mm $295.00P600 - 600mm with magnet $305.00P1000 - 1000mm $335.00P1800 - 1800mm $380.00Audible signal at0˚ and 90˚Push buttoncalibrationHold buttonDIGITAL ELECTRONIC LASER LEVELSMeasure angles in degrees or slope in percentages• Accuracy 0.1%• Inclinometer - 360º, 4 x 90º• Rechargeable battery, chargerincluded• Battery life - 25 hours approx.• Supplied with paddedOptimal combinationof our highcaseLS350 -350mmquality laser program andour well known electronic builderslevel. Ideal for projecting angles or$610.00slopes over longer distances. All the anglesare shown in degrees, or percentages. ManyLS600 -600mmsimple applications for the general contractorwould be performed much quicker and easier$635.00then with methods used today.0800 654 030ALL PRICES EXCLUDEGST, E & OE59

LK 604178mm Sander with HUGE torqueLight, easy to guide and still extremelypowerful, that’s the robust medium rangegrinder from FLEX. It can be operatedwithout a guard when using flexible 170mmsanding pads. Practical gearbox and slimback handle.• 1200 watt• 4000 rpm$599.00SKL 2903 VVFILLET WELDGRINDERLLK 1503 VRThe fillet weld grinder for smooth transitions intight spotsWhen weld seam and pipe belt sanders have reached theirlimits, then it is time for a fillet weld grinder. Its extremelynarrow grinding head and flexible FLEX sanding discs canreach most any hard-to-get-at weld seam. For the perfectsurface finish on railings, pipe constructions and othertight spots.• 1200 watt• Variable speed1500 - 4700 rpm• 187mm max wheel dia$1656.00• Variable speed from 0 to 2900 rpm• 29mm orbital stroke• Autostop brushes• Quick release blade• Rubber front-housing• Includes carry case$895.00The FLEX TigerClaw with 3-D functionjoint can cut round cornersThe doubly rotatable reciprocating sawstands out because of its flexibility: the reargear housing adjusts as much as 180˚ with 13positive stop locations. The front gear housingscrolls 360˚ with 12 positive stop locations,both even during sawing. Ideal in tight spaces:disposing of old oil tanks, in sanitation, heatingand ventilation installation, in automotive shopsand so forth.Everything includedFillet weld grinder, sanding discs, andprofiling stone in the practical FLEX case.MS 1706 FR-SetThe new FLEX wall chaser for push andpull cuttingThe unique rotating motor system allows themachine to be used for pull cutting for verticalslots, and push cutting for horizontal slots.Now wall chasing for the laying of cables orconduits is childs play. Cuts two parallel slitsup to 35mm deep and 30mm wide. Will fitstraight onto the dust extractor - available atPowerpac.• 1400 watt• ALL Up PRICES to 140mm EXCLUDE dia bladeALLGST,PRICESE & OEEXCLUDEGST, E & OE60 0800 654 03060$1367.00Adapting to any contourEven difficult to reach places on welded pipeconstructions can be worked on with the preprofiledsanding discs.

WELD ANDPIPE SANDERLBR 1506 VRAThe combination weld and pipe belt sanderWelds on flat surfaces are removed by the versatile beltsander without leaving any edges or wavy finish. Theapplication pressure acts directly on the drive roller. Thesanding belt also follows every contour closely whensanding pipes, so that even stainless steel can be givena high gloss finish.• 1200 watt• Variable speed 10-30 m/sec$1130.00• 40 x 618mm belt• Supplied with sample range of belts• Sanding belt tension: spring loaded, adapts to pipediameter from 10 to 250mm• Sanding belt replacement: quick and easyThe specialist for great pipe diametersThe sanding belt nestles itself to any curve - upto 250 mm diameter. Weld seam and pipe beltsander.L1506 VRL 2106 VC$495.00L1710 FRAThe classical 1400 Watt FLEXwith the extra-flat gearboxA soft start - then full grinding and cuttingpower. The three fold full wave electronic controlenables extremely powerful disc control. Thetightest corners and areas difficult to access areno longer a problem, thanks to the flat gearboxdesign.• 125mm wheel capacity$399.00The variable 1200watt Flex for themedium speed rangeGreat staying power, low gear ratio,plus speed selection with adjustmentwheel for controlled acceleration to the requiredspeed. This gives you a sensitive polisher on onehand and a powerful grinder in the mid-speedrange on the other hand. Ideal for the stainlessindustry.• 2200 - 6500 rpm • 1200 wattThe classic 2000 Watt FLEX for cutting,roughing and grindingWith 6000 revs it’s perfect for all jobs on metal andconcrete. Its heat-resistant FLEX metal compositehousing guarantees an additional cooling effectby improved heat exchange, even after switchingoff the machine. Plus it withstands the greatestloads.• 2000 watt $440.00• 230mm wheel capacity• Swivel guardFLEX Metal composite housingA classic of sandwich construction design by FLEX:A tough, heat resistant, light aluminium die-castouter shell. On the inside a highly insulatingplastic shell for electrical protection and motornoise reduction. Plus solid brass carbon holdersfor optimal heat dissipation.Perfect for sanding weld seamsThe circulating belt carries off the heat. That ishow weld seams can be sanded down on stainlesssteel without tempering. Weld seam and pipe beltsander.0800 654 030H 1206Low speed FLEX straight grinderThe big power puts a high torque onto the sanding discs. So that it takesoff fast that what should be sanded off. Especially practical: the plastic griphood for secure handling in any situation.• 1600 watt motor • 5700 rpm$1489.00• Metal composite housingALL PRICES EXCLUDEGST, E & OE61

Shears, fasteners, seamlockers & deburrerstrumpf MACHINES: the real alternativeSHEARS: APPLICABLE TO ANY CURVE• For cutting mild steel, stainlesssteel, non-ferrous metals andplastics• Fixed blade carriers are made ofhigh-tensile steel• Clear, unimpeded veiw of workarea and cutting line• Integrated hand guard for safety• Also available as pneumatic versionfor use in hazardous areas• Fast precision cutting also whenin upside-down positionPOWER FASTENERS• Form locked, corrosionresistant(cold forming)• Both uncoated and coatedparts can be joined• Joining of different materialsmade possible• Long lasting connection withoutadditional fateners (suchas rivets and screws)• Easy-to-set cutting clearance• 8 models to choose from• Cutting range up to 4.5mm• Working speed up to 5m perminute• Min cutting radius 20mm• Coil cutting capaciyPRICED FROM$950.00• Several tool varients fordifferent sheet thicknessesand applications• Material thickness up to 4mm• Flange height – max 40mm• Distance from edge –max 58mm, min 8mmPRICED FROM$7100.00SEAM LOCKERS• The Pittsburg seam is • Process independant of seamthe ideal connection for height (H)straight or curved ducts of • Automatic feed ensures consistent,pre-formed edges tacked high seam qualitytogether• Material thickness range 0.45mm• No resetting needed when – 1.25mmchanging from straigh to • Working speed 4-6mcurved applications on • Minimum inner radius -150mmoutside radiiPRICED FROM• Automaticall adjusts to sheetthickness $4100.00DE-BURRING TOOLS• Removing burrs after cutting • Speed adjusted to• Fitting visible edgesmaterial in hand• Removing sharp corners and • 45˚ or radius edgesedgespossible• Quick and safe working avariety of materialsPRICED FROM• Precise, even edges withexcellent surface quality $2100.00ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE62 0800 654 03062

Plate bevellers/nibblersTRUMPF BEVELLERSPREPARATION IS EVERYTHING• Creates even & accuratebevelled seamsreliably• Allows cold punchingaction with no distortionor heat• Is free of dust, sparksand fumes• Is fast, efficient &economic• Four models to choose from• Bevel angle range 20˚ – 55˚• Sheet thickness 1mm – 160mm• Smallest unit weighs 5.5kg• Working speed up to 2.5m perminute• Suitable for stainless steelPRICED FROM$5200.00Start and stop at any point onthe edge being bevelledCan be set quickly and easilyfor various sheet thicknessesPractical manoeuvrability invertical, horizontal or invertedpositionsAlso available as pneumaticversions for use in hazardousareasTRUMPF NIBBLERSAN ADVANCED CUTTING PROCESS THAT IS HERE TO STAY• Offers a range of cutting sizes from 0.5mmto 10.0mm• Design allows distortion-free easy guidanceand economical operationSuperior, emission-freeoperating pricipleEasy to change tools, can beresharpened multiple timesSuitable also for use withhigh-tensile materialsAlso available as pneumaticversions for use in hazardousareas• Eight models to choose from• Smallest unit weighs 1.7kg• Working speed up to 2m per minute• Suitable for stainless steel andnon-ferrous metals• High-energy motors – up to 2000WPRICED FROM$920.000800 654 030ALL PRICES EXCLUDEGST, E & OE63

CP719QC 1/4” Heavy duty air impact wrench• Fast, with 47Nm of torque at 7,000 rpms• Compact and lightweight for easy access to thetight spots. Only 115mm long at 1.13kg• One hand push button forward/reverse powerregulator• Perfect for small engine repair, small fastenersand body shops• Ultimate torque: 47Nm 30 ftCP734HK 1/2” Super duty air impact wrench• DYNA-PACT oil bath clutch delivers smoothoperation and extended durability• One hand push button forward/reverse powerregulator, 4 positive power settings, ultimatepower in reverse• Handle exhaust with 360˚ air inlet swivel toprevent hose kinks• Power and economy for general repair,transmission work, exhaust systems and bodyshops• Packed in a heavy duty carrying case, this kit includesthe CP734H impact wrench - plus a set of 5 sockets:with 1/2”, 5/8”, 3/4”, 7/8” & 15/16” sockets• Ultimate torque: 576Nm 425 ft/lbs$482.00CP7740 1/2” Lightweight heavy duty air impact wrench• 1/2” Air impact wrench made with magnesiumcomponents• Highest power to weight ratio in the 1/2”impact market• A compact size of just 160mm long• Air inlet swivel• Great tool for tough nuts in tight spots• Only 1.25Kg• Ultimate torque 675Nm 500ft/lbs$478.00$764.00CP749K 1/2” Super duty air impact wrench• Tackle the tough jobs with the power and speed ofthis true workhorse• Patentedclutch provides smoothoperation and extreme durability• One hand push button forward/reverse powerregulator. 4 positive power settings in forward andultimate power in reverse• Compact design with comfortable contouredhandle• Packed in heavy duty carrying case, 5 sockets, CPair tool oil with 1/2”, 5/8”, 3/4”, 7/8” & 15/16”sockets• Ultimate torque: 827Nm$722.00ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE64 0800 654 03064

CP776 3/4” Heavy duty air impact wrench• Compact size with high output• Rugged clutch mechanism for extendeddurability under heavy use• One hand push button forward/reversepower regulator. 4 positive powersettings in forward and ultimate powerin reverse• Perfect for spring work, pinion nut andtractor pad removal, truck tyre work andmajor engine tear downs• Ultimate torque: 1559Nm1150 ft lbsCP797 1” Heavy duty air impact wrench• Long known as the workhorse of thetruck tyre industry• Rocking dog clutch for smooth operationand extreme durability• Teasing throttle for easy bolt starting• Convenient reverse valve for easydirectional changes• Choice of professional mechanics forhigh volume tyre work on trucks, busesand heavy equipment• Ultimate torque: 1898Nm1440 ft lbs$2406.00$1632.00CP894 1” Heavy duty air impact wrench• Oil bath clutch for smooth operation andextended durability• One hand push button forward/reversepower regulator. 3 positive powersettings in forward andultimate powerin reverse• Adjustable side handle foradded support• Ideal for spring work, tractor padremoval, and off road equipmentrepair• Ultimate torque: 2305Nm1700 ft lbsCP5000 1” Super duty air impact wrench• Our strongest and most powerful 1”impact with extended anvil• Four position power regulator• Controllable throttle provides easy boltstarting• 7” extended anvil for easy access toheavy duty tyres• Easy to use forward/reverse valve forquick directional changes• Ideal for high volume tyre work ontrucks, buses and heavy equipment• Ultimate torque: 2712Nm2000 ft lbs$3136.00$2914.000800 654 030ALL PRICES EXCLUDEGST, E & OE65

Cordless impact wrenchesCP new line of cordless impact wrenches are hard hitting with lotsof torque providing the speed, power and durability you need toget the job done. These tools feature best in class amp hour forlongest power supply, and are ergonomically designed for comfort,control and easy handling. They are ideal for small engine or generalautomotive repair.• Versatile and easy to use• High tighting torque for its size• Ideal for site workCP 8738 14.4 volt 3/8” drive cordless impact wrench• Fastest in its class at 2,600 rpm• Hard hitting - up to 3,500 blows perminute• High torque: light, compact, wellbalanced design• Perfect for small engine and generalautomotive repair work• All kits come in heavy duty carryingcase• Supplied with 2 NI-Cd batteries• Ultimate torque: 119Nm88 ft lbs$1072.00CP 8748 18.0 volt 1/2” drive cordless impact wrench• Most torque at 325Nm of anycordless impact wrench• Mid-handle design for comfortand balance• Variable speed trigger• Supplied with 2 NI-Cd batteries• Supplied in heavy duty case• Ultimate torque: 325Nm240 ft lbs$1362.00Ratchet WrenchesCP826 1/4” super duty air ratchet$358.00$446.00• Exceptional durability with an advancedhead design that virtually eliminatesslippage• Urethane grip for comfort and control• Extended length - designed for greaterreach in confined areas• Faster rundown with 250 rpms• Excellent for under dashboard work,small engine repair and body shops• 250mm OAL• Ultimate torque: 20Nm154 ft lbsCP826TCP828 3/8” Heavy duty air ratchet$386.00CP7830 3/8” Super duty air ratchet3/8” Super duty ratchet• Same great features as the CP826 in a3/8” square drive• Ultimate torque: 20Nm154 ft lbs• Features CP’s new TriSpring head designwhich virtually eliminates slippage whilereducing the potential for heat build up,even in long run downs• Compact, yet packed with power andspeed• 254mm OAL• Ultimate torque: 68Nm50 ft lbs• CP’s new high powered ratchet offers the most torque at 122Nm 190rpm • Aircraft quality aluminum for light weight durability and greatbalance • Only weighs 1.22 Kg • Features the TriSpring anti-slip headdesign which virtually eliminates slippage while reducing the potentialfor heat build up, even in long rundowns • Premium tool for brakework, transmission and engine work when you need extra torque• Ultimate torque: 122Nm 90 ft lbs$612.00ALL PRICES EXCLUDEGST, E & OE66 0800 654 030

CP856 Heavy duty straight die grinderCP862 Heavy duty grinder• Insulated grip for greater operatorcomfort• Adjustable speed regulator for precisecontrol• Lock off throttle to prevent accidentalstart up• Excellent for blending, smoothing,porting and deburring in confinedareas• 1/4” or 6mm Collet• Max rpm: 25,000$378.00• 90˚ angle head for easy accessibility• Insulated grip for greater operatorcomfort• Adjustable speed regulator for precisecontrol• Lock off throttle to prevent, smoothing,porting, and deburring inconfined areas• 1/4” or 6mm Collet• Max rpm: 22,000$394.00CP860 Heavy duty die grinder• Rugged, energy efficient 370W motor• Adjustable power regulator for precisecontrol• Lock off throttle to prevent accidentalstart ups• Square handle design for positive grip• Complete with 1/4” and 6mm collet• Excellent for cleaning tyre moldings,porting and relieving engines, andgeneral high speed polishingand grinding• 1/4” or 6mm Collet• Max rpm: 24,000CP872 Standard duty die grinder• Adjustable power regulator for precisecontrol• Lock off throttle to prevent accidentalstart up• Excellent for tyre scuffing, cleaningtyre moldings and general high speedpolishing and grinding• 1/4” or 6mm Collet• Max rpm: 22,000$362.00$230.00CP854 4” Heavy duty angle grinder• Powerful 450W high performancemotor for fast, efficient grinding intight quarters• Aluminum alloy housing is ruggedyet lightweight for maximum operatorcomfort• Spiral bevel gearing inangle head provides extendedlife and smooth low vibration• Excellent for weld preparationand smoothing, rust removal,deburring and blending of steel,cast iron and aluminum• Max rpm: 12,000CP857 7” Heavy duty angle grinder• Powerful 950W high performance motorfor fast metal removal• Aluminum alloy housing is rugged, yetlightweight• Spiral bevel gearing in anglehead provides extended life andsmooth low vibration• Excellent for weld preparationand smoothing, rust removal,deburring and blending of steel,cast iron and aluminum• Max rpm: 7,500$780.00$1018.00ALL PRICES EXCLUDEGST, E & OE0800 654 03067

CP7300 6mm mini air drill• 6mm reversible mini drill• General purpose, reversibledrill, 2,700 rpm• Compact and lightweight foreasy handling• Planetary gearing with brassbushings• Jacobs Chuck 6mm capacity• Free speed: 2,700 rpmCP785QC 10mm standard duty drill• Powerful energy efficient air motorresists stalls• Triple idler planetarygearing for smoothoperation and extended tool life• Handle exhaust reduces noise anddirects air away from work area• Ideal for accessory and air conditionerinstallation, engine work and auto bodyrepair• Free speed: 2,400 rpmCP789R-26 10mm super duty reversible drill• Teasing throttle for precisecontrol• Oil free operation• Needle bearing gearing for improveddurability• Applications include screwdriving,honing and heavy drilling• Free speed: 2,600 rpmCP789HR super duty reversible drill$336.00$336.00$612.00CP871 High speed tyre buffer• Adjustable speed regulator for precisecontrol• Jacob’s chuck for holding buffingaccessories• Lock off throttle to preventaccidental start ups• Rear exhaust directs airaway from the work area• Ideal for patchwork, roughing areas forrecapping and cleaning tyre moldings• Max rpm: 22,000CP873 Low speed tyre buffer• Quick change slip chuck for fast andeasy change of buffing wheel• Adjustable speed regulator for precisecontrol• Lock off throttle to preventaccidental start ups• Rear exhaust directs airaway from the work area• Ideal for patchwork, roughing areas forrecapping and cleaning tyre moldings• Max rpm: 2,800$244.00$236.00• Teasing throttle for precise control• Needle bearing gearingfor improved durability• The right tool for heavy drilling, reaming,hole sawing and jobs requiring a lot oftorque• Free speed: 500 rpm$758.00CP879 10mm reversible angle drill• Compact, low profile head for confinedareas• Reverse valve for easy directionalchanges• Teasing throttle forcontrol from start upthrough run down• Ideal for screwdriving anddrilling in hard to reachareas• Free speed: 1,800 rpm$370.00ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE68 0800 654 03068

CP7110 Heavy duty air hammer• Powerful, yet economical for fast cuttingaction• Vibration isolation system for smootheroperation and greater comfort• Unique cushioned exhaust deflector onbarrel for comfort and control• Touch trigger for precisionstart ups and totalcontrol• Ideal for exhaust system work, boltcutting, bushing driving, shearing andfront end work• Blows per minute: 3,200CP7110KHeavy duty air hammer kitKit includes CP7110 air hammer plusa posi-lock retainer and four chiselspacked in a heavy duty carrying caseCP711 Standard duty air hammer• Powerful, yet economical for fast cuttingaction• Designed for exhaust pipe removal, bodyshop, scraping rust and light front-endwork• Quick change retainer for fast and easyaccessory changes• Blows per minute: 3,500CP711KStandard duty air hammer Kit• Kit includes CP711 plus four piece chiselset packed in a heavy duty carryingcaseCP711Hex KitStandard duty air hammer kit• Same great features as the CP711 witha hexagon bushing• Kit includes CP711 Hex plus fourpiece chisel set packed in a heavy dutycarrying caseCP717 Standard duty air hammer• Most powerful CP air hammerfor automtive, truck and off-roadequipment• Positive action trigger forprecise control• Ideal for front endwork, king pin removal and installationof bulldozer walking beams, removalof truck springs and heavy duty springbushings• Blows per minute: 1,800 rpmCP717KSuper duty air hammer kitKit includes CP717 air hammer plus afour piece chisel set packed in a heavyduty carrying case0800 654 030$348.00$238.00$236.00$1954.00CP883 Air hydraulic riveter• Vacuum assist system designed for greater efficiency in downwardriveting• Cylinder cap with storage area for spare nose pieces• Universal air inlet swivel to allow greater maneuverability• Three piece jaw set designed from the highest quality materials• Rubber boot protects tool and work surface• Comes complete with 3/16” and 1/4” nose pieces• Capacity: 1/4”CP884 Air hydraulic riveter$1532.00$844.00• Vacuum assist system designed for greater efficiency in downwardriveting• Cylinder cap with storage area for spare nose pieces• Universal air inlet swivel to allow greater maneuverability• Three piece jaw set designed from the highest quality materials• Rubber boot protects tool and work surface• Comes complete with 1/8”, 5/32” and 3/16” nose pieces• Capacity: 3/16”ALL PRICES EXCLUDEGST, E & OE69

CP864 Heavy duty random orbital sander• Rotary and orbital motion for rapidremoval as well as fine finishing• Sure-grip insulated handle• Crossbolt style hub mountingminimizes vibration• Circular exhaust diffuses air flow• Ideal for blending andsmoothing filler, feather edgingand pre-paint preparation• Max rpm: 10,000$378.00CP865S Heavy duty vertical sander• Rugged 750W motor• Automatic release throttle with positivestop action• Muffled handle exhaust to ventair away from work surface• Perfect for roughing in body filler, weldsmoothing, paint and rust removal• 178mm ø pad• Max rpm: 5,000$766.00CP7250 Random orbital handle sander• 5mm orbit• High power, fully balanced, oil freemotor• Oversized hub bearing with dustprotection for long life• Regulator with safety shut off to matchthe speed to the application• Low profile design for ultimate comfortand control• Non vacuum• 150mm ø pad• Max rpm: 12,000CP7220E Random orbital palm sander• 2.5mm orbit for high quality finishing• Easy to handle, compact and lightweight, providing the best power toweight ratio in its class• 224W oil free motor delivers the poweryou need to get the job done while keepingthe work area free of contaminants• Triple balance design provides balancewith low vibration for superior control• Adjustable speed regulator with safetyshut off for maximum control• Non vacuum (CP7220E)• Self vacuum (CP7220SVE)• Central vacuum (CP7220CVE)• 150mm ø pad• Max rpm: 12,000CP777 Heavy duty orbital sander• Balanced counterweight design• Patented, non rotating gear housingmakes tool easy to handle• Smooth strength and power forshaping, blending and smoothingbody filler and rapid materialremoval• 203 mm ø pad• Max rpm: 900ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE70 0800 654 03070$554.00$554.00$612.00CP778 Heavy duty hi speed sander• Built in regulator and variable speedthrottle for precise speed control• Rugged, energy efficient 370Wmotor• For small jobs and hard to reachspots, this hi speed sander is idealfor paint removal, shaping fillerpatches, weld smoothing and rustremoval• Lightweight, low vibrationfor easy handling• 125 mm ø pad• Max rpm: 14,000Smart seriesCP’s new Small Area repair Technique tool kits. Instead of using a150mm for a 25mm scratch or ding you can use these new 50mmand 75mm tools designed to get the job done faster and easierCP7200 Mini random orbital sander kit• Compact and lightweight for easyaccess in tight areas• Rubber molded palm grip foradded comfort• Adjustable power regulator• Two finger throttle for easier controland less fatigue• Silenced handle exhaust directs airaway from work area• 51 or 76mm ø pad• Free speed: 15,000 rpmCP7200SMini random orbital sander kitKit includes: CP7200 Mini random orbital sanderplus (1) 50mm and 75mm backing pads, (10)50mm 320, 400 and 600 grit sand paper andspindle key packed in a heavy duty carrying caseCP858 Belt sander• 10mm belt capacity with quick change• Adjustable sanding arm• Handle exhaust• Excellent for paint removal,weld sanding,smoothing and rustremoval• Belt size 10 x 330mm$270.00$408.00$546.00

CP861 Heavy duty high speed cutter• Rugged energy efficient 370W motor• Lightweight at only 0.74Kg• Square handle design for positive grip• Excellent for cuttingthrough sheet metal,fibreglass, bolts, mufflerclamps and hangers. Alsogrinds down burrs and roughedges• 68mm ø wheel• Max rpm: 20,000CP781 Air screwdriver• Cushion clutch withexternal clutch adjustment• Built in quick change chuck• Convenient forward/reverse valve• Ideal for general repair and body shopwork• 1/4” drive• Free speed: 800rpmCP785S Heavy duty shear• Powerful, energy efficient370W motor• Triple idler planetary gearing forsmooth operation and extendedtool life• Ergonomic handle design for increasedcomfort• Heavy duty shear head provides long lifeand reliable cutting performance up to18 gauge steel• Ideal for cutting squares and angles inmaterials such as aluminum, tin andsteel• 2.400 strokes per minuteCP7901 Super duty recip saw$698.00$612.00• LOWEST VIBRATION on the market• Power at 10,000 strokes per minuteallows you to cut through material with ease• Adjustable guard/guide allows operator to set depth of cut• Ergonomic design for comfort and easy handling• Premium tool for body, exhaust work• 10,000 strokes per minute$336.00CP835 Heavy duty nibbler•Rugged nibbling head and 50mmdiameter punch cuts steel up to 16gauge and aluminum up to 10 gauge• Easy access to punch and die forquick replacement• Four optional cutting positions• Perfect for accurate cutting of steeland aluminum. Best for tightcorners and circles• 2,750 strokes per minuteCP710 Engraving pen•Lightweight for easy operation• Fine point stylus for preciseengraving• Cushion finger grip for comfort• Low air consumption at only 76 1/m• 14,000 strokes per minute$182.00CP7901KSuper duty recip saw kit• This heavy duty kit includes theCP7901 reciprocating saw plus (5)each replacement blades: 18T, 24T,32T packed in a heavy duty carryingcase$562.00$666.000800 654 030ALL PRICES EXCLUDEGST, E & OE71

FUJI Angle GrindersCompact Fuji angle grinders are truly heavy duty, built to last in the mostdemanding applications while delivering the following benefits: Power, lownoise, ergonomics, hardened steel motor parts, air cooled gearboxFA 4C-IF (4”)• 13,500rpmFA 5E-2VF (5”)• 12,000rpm• 10,900rpm• 6000rpm*FUJI FG 3H-5 Straight Grinder• Ideal for large stones or burrs• High torque for heavy grinding• 14,600rpm• 6mm or 1 /4" colletsFuji Air ToolsFA 7E-2/3VF (7”) FA 9C-2 (9")• 7600rpm • 5900rpm• 8400rpm$1109.00 $1234.00 $1449.00 $1825.00$914.00FUJI Vertical Grinders• 125mm, 178mm, 230mm• Very powerful due to direct drive shaft• Speed control governor maintains rpmunder loadFV 7-4MFV 9BH-1M$1379.00$2098.00A variety of rpm optionsto suit your applicationFUJI FG 6H-1M Straight Grinder• Designed for heavyindustrial use• 150mm stone or 200mm wirewheel capacity• 6300rpm$1364.00FUJI FG 2VX-1F Low Speed Grinder• Very high torque motor ideal for 3M products• Flap wheels• Scotchbrite-abrasive sleeves• Low-speed – 4300rpm• 6mm or 1 /4" collets$1005.00FUJI FG 26L-1F Extension Grinder• High power professional tool• Completely constructed in steel• Precision motor parts to provide highpower continuously for demanding jobs• Bearing support for guaranteed smoothrunning• 24,000rpm• 3", 6", 1 /8", 1 /4" collets availableFUJI FG 26-20BF Die Grinder• Shortened version ofFG 26L-1F$630.00FUJI FRS-45 Air SawThe FRS-45 Air saw is equipped with a damper to minimize vibrationand a stroke regulator and blade cooling device. The cuttingdirection is adjustable to provide optimal operator comfort.• Heavy duty alloy housing• Internal trigger for ease of use in spacerestricted areas• Uses standard sabresaw blades• 1600 strokes per minute• 229mm O.A.L.$750.00$2549.00ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE72 0800 654 03072

Fuji Air ToolsFUJI FCH-20F Chipper• Ideal for light chipping, paint and rust removal• Very heavy-duty steel body• Compact – 182mm O.A.L.• Chisels from 100-300mm in length$409.00FUJI FCH-25-1F Chipper• Larger version of FCH-20F• Accepts same chisels• Better suited for concrete work, alsoused for removal of welding flux$594.00FUJI Sand RammersFuji sand rammers are powerful but light with a stroke range from50mm to 127mm. They are excellent for ramming sand castingsin any ferrous or non-ferrous foundry. Non-rotary type rammers areavailable for use with regular shaped butts.• 14 models to choose from• Butt range from 38mm ø to 75mm øfrom$975.00FUJI FRD-6PX-3 Drill• High torque motor• 2800rpm• 10mm diameter chuck• The very best for production situations• Sand-cast alloy housing with steel gearbox• Quiet running due to inbuilt rear exhaust withsilencer$825.00FUJI FRD-6PX-7 Drill• The most powerfuldrill of its size• Very high torque• 600rpm• 13mm diameter chuck$1185.00FUJI FRD-16Z-1C Drill• Ultimate engineers drill• 16mm diameter chuck• Very powerful• 800rpm• Compact$1650.00Fuji Air Tool Co. specialize in high quality and have anexpansive range of air toolsImpact wrenches up to 2 1 /4" drivePipe bevelling equipmentAngle drills up to 100mm øcapacityPneumatic winchesDrills up to 100mm ø capacity0800 654 030ALL PRICES EXCLUDEGST, E & OE73

TRELAWNY SCALERSSurface Preparation TechnologyMADE IN BRITIANTRELAWNY NEEDLE SCALERS2 BPG – Pistol Grip• 19 x 3mm needles• Chisel holder available$693.002mm, 3mm, 4mm diameterneedles available3 BPG – Pistol Grip• 28 x 3mm needles• Chisel holder available$704.0012mm to 50mm widechisels to suitTRELAWNY LONG REACH SCALERSLR4 – 4FT, LR5 – 5FT, LR6 – 6FT• 4ft, 5ft and 6ft lengths• Alloy version for overhead use• Chisels available: 50 and 100mm• Scrapers available: 200 and 300mm• Needle scaler attachmentavailable ex-stock• Air consumption – 12cfm @ 90psi$1265.00THE TRUE CONVERTIBLESChange to needle scalers inseconds, giving you two tools inone. Increased versatility allowsyou to pinpoint uniqueapplications.EXCLUSIVELY DESIGNEDChisel holder with modern singleball retainer for safe lock andquick fitRUGGEDLY BUILTLow maintenance with longservice life. Stays on the job evenin harsh environmentsTRELAWNY SCALING HAMMERSSH-1H SINGLETCT HEAD$627.00replaceable scaling heads• Quick changes in the field or workshop – lessdowntime and lower maintenance costs• Tungsten-carbide cruciform and bushhammer heads stay sharper longerNylon brush seals• Cleans pistons on each and every stroke• Improves performance and extends tool lifeSingle screw-cap design• Simplifies piston replacementSH-3H TRIPLE TCTHEAD$1309.00ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE74 0800 654 03074Air inlet/side handle port• Converts to inline configuration for evenmore versatility• Side handle mounts easily for comfortablegrip and stability

AIR TOOL ACCESSORIESPVC AIRHOSE 10mm• Complete with ARO Coupler set10 metres$29.0020 metres30 metres$48.00$66.00AIRFORCE EP22AIR TOOL OIL• High grade, English madeair tool oil, suitable forinline oilers, lubricators etc.•Light and easy flowingensures full penetration ofworking parts1 litre5 litre$16.00$55.00COUPLERS1/4” TAILPIECE – 6mm, 8mm, 10mm• A109, A110, A111 – all $2.20HOSE INSERTS – 6mm, 8mm, 10mm• A3946, A3947, A3948 – all $2.20HOSE CLAMP – A2530• 12mm to 20mm range• Stainless steel – all $2.201/4” COUPLER – A210• Quick release coupling interchangeable withARO, Rectus, PCL. 1 /4” BSP thd – $10.001/4” FEMALE CONNECTOR• A2609 – $2.201/4” MALE CONNECTOR• A2607 – 1/8” P.T.• A2608 – 1/4” P.T.• A2700 – 3/8” P.T.– all $2.200800 654 030ALL PRICES EXCLUDEGST, E & OE75

APT Construction ToolsAPT 140 – 40lb Paving Breaker• Rugged yet lightweight paving breaker• Suited for light to medium construction work, lightdemolition of floors, pavements and walls• Shank size 1¼” x 4”• Requires 48cfm @ 90psi• Muffler included$3400.00APT 160 – 60lb Paving Breaker• Versatile hard-hitting breaker• Suited for medium to heavy demolition work andconcrete breaking• Shank size 1¼” x 6”• Requires 60 to 65cfm @ 90psi• Muffler included$3524.00APT 180 – 90lb Paving Breaker• High performance, most powerful breaker from APT• Suited for heavy demolition and concrete breaking• Shank size 1¼” x 6”• Requires 75 to 80cfm @ 90psi• Muffler includedAIRGO–LINE Paving Breaker$3716.00• Vibration dampening ergonomic handle absorbsshock to operator• Available for APT 140, 160 and 180• Maintains hitting powerAdditional with each breaker,or call us about the “retrofit kit”APT 650 Series Chipping Hammer APT 131 Backfill Tamper• Used for scaling, chiselling, removing • 146mm diameter steel buttconcrete buildup from concrete mixers, • Built-in larger automatic oilerlight demolition, form stripping, etc • Flapper valve design allows for• Quick release heavy duty bolt-on chisel dirty airretainer included (not shown)• Requires 42cfm @ 90psi• All models require 36cfm @ 90psi • Weight: 16.8kg• Length: 1320mm652 – 50mm stroke653 – 75mm stroke654 – 100mm strokeALL MODELS$1782.00$3184.00Kidney -Shaped FeetFor poles, lampposts, etc. Exstock.25mm chisel WH 10F- $6535mm scaling chiselW10 SL- $65Point WH 10P- $50ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE76 0800 654 03076

APT 125 CLAY & TRENCH DIGGERAPT Construction Tools• Perfect for digging lightto medium packed soil,tunnelling around existingfoundations and lightdemolition work• Inside trigger for safety andcontrol• Flapper valve design allowsfor dirty air• 7 /8” x 3 1 /4“ shank (see page18 for chisels and points)• Requires 21cfm @ 90psi• Weight: 16.9kg• Length: 790mm$3304.00M317 APT NEEDLE SCALER/CHIPPER KIT• Needle scaler attachment - 19 x 3mm Ø needles• Chisel attachments• Total steel construction - Heavy Duty$748.00APT 109 ROCK DRILL APT 115 ROCK DRILL APT 137 ROCK DRILL• 45mm diameter hole capacity• 7 /8” x 3 1 /4” shank• 4-speed• 300mm drilling depth• Use with either “button” drills or integral • 30lb class• 250 and 450mm chisels stockedsteels• Available on request• Requires 21cfm @ 90psi• Built-in oilerAPT 155 ROCK DRILL• Weight: 4.1kg• Chisels and points stocked• Silencer supplied• Requires 36cfm @ 90psi• 3-speed• 60lb class• Weight: 8.7kg• Available on request• Silencer supplied$2520.00 $4424.00$5416.00$6034.00The APT models 109 and 115 arelightweight tools used for drilling holesfor anchor bolts and dowel-hole drilling.Both have a “rotation stop” feature toconvert them to light-chipping tools.0800 654 030ALL PRICES EXCLUDEGST, E & OE77

"In our busy modificationcentre, the Rivet Busterhas reduced our chassisstripping time by 75%, itis a much safer method ofremoving rivets and it onlyrequires one person."TONY BUCKNELLHINO TRUCKSPALMERSTON NORTHAPTRIVETBUSTER!• Designed to cut metal rivets offtruck chassis, pylons, bridges etc.• Rivets are removed in secondsthanks to the 11" stroke.• Weighs 15 kg• Requires 52 cfm @ 90psi.APT 1133$3310.001" chisel 441-031/2" punch 446-035/8" punch 447-03$118.00 eaALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE78 0800 654 03078

CONSTRUCTION TOOLACCESSORIESBREAKER POINTS AND CHISELS• 7 /8 x 3 1 /4” suits APT 125 $24.30• 1 x 4 1 /4 ” suits APT 140 $26.90• 1 1 /4 x 6” suits APT 160, 180 $44.00To suit APT, CP, THOR, IRCLAW COUPLINGS – TYPE A• 1 /2 thd suits APT 140, 160• 3 /4 thd suits APT 180EACH• 13mm tail• 19mm tail $13.00INTERGRAL DRILLBITS TO SUITAPT 109, CP9• Hollow core for dust removal• 13-35mm ø available - 330mm drilling depth• 13mm $105.00 • 25mm $125.00• 16mm $109.00 • 28mm $135.00• 19mm $116.00 • 32mm $145.00• 22mm $120.00 • 35mm $155.00• Chisels & Points - 250mm O.A.L. $45.00 each30m COILWITH TYPE ACLAW COUPLINGSCOMPLETEPACKAGE PRICE$266.00APT AIR HOSES13mm (1/2") DIAMETER TO SUIT APT 109, 115, 650SERIES, 1133• Vinyl tube/rubber covered for strength andflexibility• Lightweight – approximately 8kg per 30m• Working pressure 200 to 350psi• Medium to high oil resistance• Made in USATYPE A COUPLING SETPER METERWITH CLAMPS$7.00 $56.00GENUINE APT SWIVEL JOINT – 3388• Hardened steel• Top quality• 7 /8 x 24thd to 1 /2 hose to suit APT650 Series chippers$74.50APT INLINE OILERSLAYFLAT 19mm (3/4") DIAMETER TO SUIT APT 125,131, 140, 160, 18030m COILWITH TYPE ACLAW COUPLINGSCOMPLETEPACKAGE PRICE$776.000800 654 030• Nitron rubber• Reinforced for strength and durability• Ribbed – resistant to abrasion• Lightweight – approximately 6kg per 30m• Working pressure to 360psi• Medium oil resistance• Weather resistant• Made in SpainPER METERTYPE A COUPLING SETWITH CLAMPS$24.00 $56.00APT oilers are heavy-duty inline lubricatorsmade to be installed within 10 to 12ft of thetool. Tough and rugged, they are designed towithstand being dragged behind the air tool.A common setup will incorporate the oiler atthe end of a short length of whip hose.Model Cap. Hose barbpipe sizepsi Price17755 3.7fl oz 3/4” NPT 260 $11017756 11.0fl oz 3/4” NPT 300 $12517757 16.0fl oz 1” NPT 250 $170ALL PRICES EXCLUDEGST, E & OE79

WYCOCONCRETE VIBRATORS- a Solid ReputationWYCO’S UNIQUE CONCRETE VIBRATORDELIVERS BIG BENEFITSD COMPACTION WITH RUGGED RELIABILITY FROM WYCO• Significant benefits claimed for a range of square-head concretevibrators result in faster operation, lower cost andbetter finished concrete and with fewer air voids givinghigher strength.• The key to the unit’s efficiency is its patentedsquare-profile head which providesover 25% more surface area than a roundhead.• To improve cooling and minimize entrapmentof foreign particles, Wyco havedesigned their electric motors very open.The entire units are easily cleaned aftereach use by hosing down, without damageto the electric components.• Powerpac has the biggest range of vibratorsex-stock backed by comprehensive spares in thecountry.extremelylight weighttotallyinsulatedmore torquefor less ampsflexible drives1.5, 2.1, 3.0,4.2 & 6.0mtsafety tested,UL listed andCSA certified2HPrs750-D19mm750-EH25mm750-FI35mm750-GI44mm750-LI50mm• 20-50% faster andmore effective thanround-heads• up to 27% moresurface area• faster concreteconsolidation• more effectiveenergy transmission750-MI56mmSBI HEADDesigned for use in limited-depthpours, such as tilt-up walls. At only 4”long the entire head can be immersedin the concrete for more efficientALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE80 0800 654 03080902a 2hp $1713903 3hp $1982SELECT THE MOTOR, FLEXIBLE SHAFT LENGTH AND HEAD TO SUIT YOUR NEEDSMOTOR SHAFT/DRIVE HEADMODEL POWER LIST PRICE SPECIAL$1370$1585Length LIST PRICE SPECIAL0.6m $302 $2711.5m $429 $3442.1m $521 $4163.0m $658 $5264.2m $849 $6796.0m $1124 $899SIZE LIST PRICE SPECIAL19mm $372 $29825mm $397 $31835mm $903 $67944mm $943 $71050mm $1040 $78956mm $1175 $882SBI $561 $448

WYCO - Petrol- EZ Vibe- Freedom on siteWYCO Square Head EZ Vibe• Comes equipped with a 35cc air-cooled 4-cycle Robin engine• 1.6 hp, .65 litre fuel capacity• The shaft length is 1.5mt and comes with a 35mm square head.• The shaft is protected from excessive wear and does not kink• Uses a diaphragm carburetor• Lightweight at 10.5 kg• This portable unit includes a safety harness• Adjustable speed$2949.00Lightweight, Portable and full poweredThis compact, gas powered concrete vibrator will drive any sizeSquare Head at electric vibrator speeds. You can go anywherethe job is without the extension cord.Backpack features allow the operator to match the vibrator speed withthe mix.Dial type variable speed controlOperator can lock-in the proper maximum speed for Square Head sizeVisual readout indicatorDigital tachometer indicates vibrator speed so operator can adjust vibrationSpeed increaserProvides a positive mechanical drive, no slippage effecting head speedsModel 402BP• Runs up to speed in the mix• Durable 40cc gas engine• Compact and reliable gear increaser• Heavy duty clutch• Swivel mounted, isolated frame• Quick disconnects for easy storage$2910.00• Backpack unit only - see page 80 forhead and drive options• Maximum head size 50mm• Maximum drive lenght 4.2m0800 654 030ALL PRICES EXCLUDEGST, E & OE81

WYCO - COBRA series- High cycle electric vibrator - almost nil maintenanceConverter Features• Vibrating motor is in the lead - No flexible shaft - Totally sealed- Minimal maintenance - Can be hosed down for cleaning• Sealed switch• Inlet volume surge protection• Protection at converter outlet limiting amps per phase• Ergonomic box making transport and handling easier• 15 mtrs of cable gives the equipment a high level of autonomyVibrator Head Features• Vibrating heads that easily adapt to a variety of jobs• High-frequency encapsulated internal motor ensures high performance andgreat resistance to wear and tear• Under conditions of normal use the vibrators do not require maintenanceVibrator Head SpecificationsVibratingHeadDiameter Length v.p.m Performance $MB 32 37mm 356mm 12,000 up to 23 m 3 /h $4125.00MB 52 50mm 390mm 12,000 up to 23 m 3 /h $4760.00MB 62 56mm 406mm 12,000 up to 34 m 3 /h $4865.00WYCO - WPV series- Internal Pneumatic vibratorsDurability... hardened steel components provide maximum operational hoursSafety... work without electricityPowerful... high frequency and high amplitude of vibrationSimplicity... low maintenance bearingless air vibrator• Maintenance-free handle with a valve admission system• Oil reservoir, prepared for several days (fill at least once a week under normalconditions)• Optimal relationship between frequency and amplitude for the right concretecompaction• Standard 2.1 metre handling hoseSpecificationsMODEL Diameter Length Frequency Air Consumption Performance $vpm to CFM M 3 /hWPV 25 25mm 230mm 20,000 14 3.3 $2100.00WPV 40 37mm 300mm 19,000 18 12.1 $2290.00WPV 50 50mm 300mm 18,000 22 20.0 $2490.00WPV 60 56mm 300mm 17,000 27 23.6 $2650.00WPV 80 75mm 337mm 15,000 44 33.8 $2900.00ALL PRICES EXCLUDEALLGST,PRICESE & OEEXCLUDEGST, E & OE82 0800 654 03082