ETSI EN 300 440-1 V1.3.1 ETSI EN 300 440-2 V1.1.2 Measurement

ETSI EN 300 440-1 V1.3.1 ETSI EN 300 440-2 V1.1.2 Measurement ETSI EN 300 440-1 V1.3.1 ETSI EN 300 440-2 V1.1.2 Measurement

31.07.2015 Views

DONGGUAN CITY FLYSKY REMOTE MODEL CO., LTD.MODEL: FS-TH9X2 SUMMARY OF TEST RESULTSETSI EN 300 440-2 V1.1.2 Description of Test Result§4.1.1 Equivalent Isotropically Radiated Power Compliant§4.1.2 Permitted Range of Operating Frequencies Compliant§4.1.3 Spurious Emissions Compliant§4.1.4 Duty Cycle Compliant§4.2.4 Receiver Spurious Emissions CompliantREPORT NO.: STR07108045E-1 PAGE 6 OF 29 EN 300 440-1 EN 300 440-2

DONGGUAN CITY FLYSKY REMOTE MODEL CO., LTD.MODEL: FS-TH9X3. Equivalent Isotropically Radiated Power3.1 Measurement UncertaintyBase on NIS 81, The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of anyradiation emissions measurement is + 3.0 dB.3.2 Standard ApplicableAccording to ETSI EN 300 440-1 V1.3.1 section 7.1.3, the effective radiated power shall not exceed the powerclass value given in following table:The power class is 8. In accordance with ERC/REC 70-03, the maximum allowable power is 10 mW e.i.r.pFor equipment with an integral antenna and no RF connector, measurements under extreme conditions are notrequired.3.3 Test Equipment List and DetailsDescription Manufacturer ModelSerialNumberCal. Date Due. DateEMI TestReceiverRohde & Schwarz ESI26 838786/013 2007-1-25 2008-1-24Signal Generator Rohde & Schwarz SMR20 100047 2007-1-25 2008-1-24Bilog Antenna Chase CBL6112B 2591 2007-1-25 2008-1-24Horn Antenna Schwarzbeck VUBA9117 115 2007-1-25 2008-1-243mSemi-anechoicchamberAlbatross Projects 9X6X6 ---- 2006-3-21 2008-3-203.4 Test ProcedureOn a test site, selected from annex A, the equipment shall be placed at the specified height on a support, asspecified in annex A, and in the position closest to normal use as declared by the manufacturer.REPORT NO.: STR07108045E-1 PAGE 7 OF 29 EN 300 440-1 EN 300 440-2

DONGGUAN CITY FLYSKY REMOTE MODEL CO., LTD.MODEL: FS-TH9X3. Equivalent Isotropically Radiated Power3.1 <strong>Measurement</strong> UncertaintyBase on NIS 81, The Treatment of Uncertainty in EMC <strong>Measurement</strong>s, the best estimate of the uncertainty of anyradiation emissions measurement is + 3.0 dB.3.2 Standard ApplicableAccording to <strong>ETSI</strong> <strong>EN</strong> <strong>300</strong> <strong>440</strong>-1 <strong>V1.3.1</strong> section 7.1.3, the effective radiated power shall not exceed the powerclass value given in following table:The power class is 8. In accordance with ERC/REC 70-03, the maximum allowable power is 10 mW e.i.r.pFor equipment with an integral antenna and no RF connector, measurements under extreme conditions are notrequired.3.3 Test Equipment List and DetailsDescription Manufacturer ModelSerialNumberCal. Date Due. DateEMI TestReceiverRohde & Schwarz ESI26 838786/013 2007-1-25 2008-1-24Signal Generator Rohde & Schwarz SMR20 100047 2007-1-25 2008-1-24Bilog Antenna Chase CBL6112B 2591 2007-1-25 2008-1-24Horn Antenna Schwarzbeck VUBA9117 115 2007-1-25 2008-1-243mSemi-anechoicchamberAlbatross Projects 9X6X6 ---- 2006-3-21 2008-3-203.4 Test ProcedureOn a test site, selected from annex A, the equipment shall be placed at the specified height on a support, asspecified in annex A, and in the position closest to normal use as declared by the manufacturer.REPORT NO.: STR07108045E-1 PAGE 7 OF 29 <strong>EN</strong> <strong>300</strong> <strong>440</strong>-1 <strong>EN</strong> <strong>300</strong> <strong>440</strong>-2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!