ETSI EN 301 489-1 V1.6.1 ETSI EN 301 489-3 V1.4.1 Measurement ...

DONGGUAN CITY FLYSKY REMOTE MODEL CO., LTD.Model: FS-TH9XMaintenance of compliance is the responsibility of the manufacturer. Any modification of the product maybewhich result in lowering the emission/immunity should be checked to ensure compliance has been maintained1.3 Related Submittal(s)/Grant(s)No Related Submittal(s).1.4 Test MethodologyAll measurements contained in this report were conducted with ETSI EN 301 489-1 V1.6.1, Electromagneticcompatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radioequipment and services; Part 1: Common technical requirements and ETSI EN 301 489-3 V1.4.1, Electromagneticcompatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radioequipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequenciesbetween 9 kHz and 40 GHzThe equipment under test (EUT) was configured to measure its highest possible emission/immunity level. The testmodes were adapted accordingly in reference to the Operating Instructions.1.5 Test FacilityThe Laboratory has been registered and fully described in a report filed with the (FCC) Federal CommunicationsCommission. The acceptance letter from the FCC is maintained in files which the Registration No.: 759397.Measurement required was performed at laboratory of Solid Industrial Co., Ltd. at 333 Bulong Highway BujiLonggang, Shenzhen, Guangdong, China.1.6 EUT Exercise SoftwareThe EUT exercise program used during the testing was designed to exercise the system components. The testsoftware is started while the whole system is on.REPORT NO.: STR07108045E-2 PAGE 4 OF 22 EN 301 489-1 EN 301 489-3