4775 Powerflow Flux (English (GB)) CEAMGE SDS EU ... - Toolbank
4775 Powerflow Flux (English (GB)) CEAMGE SDS EU ... - Toolbank 4775 Powerflow Flux (English (GB)) CEAMGE SDS EU ... - Toolbank
Powerflow Paste Large8. Exposure controls/personal protectionIrelandNo exposure limit value known.ItalyNo exposure limit value known.EstoniaNo exposure limit value known.LithuaniaNo exposure limit value known.SlovakiaNo exposure limit value known.HungaryNo exposure limit value known.PolandNo exposure limit value known.SloveniaNo exposure limit value known.LatviaNo exposure limit value known.GreeceNo exposure limit value known.PortugalNo exposure limit value known.Recommended monitoringproceduresExposure controlsOccupational exposurecontrolsHygiene measures :Respiratory protection :Hand protectionEye protection: If this product contains ingredients with exposure limits, personal, workplaceatmosphere or biological monitoring may be required to determine the effectivenessof the ventilation or other control measures and/or the necessity to use respiratoryprotective equipment. Reference should be made to European Standard EN 689 formethods for the assessment of exposure by inhalation to chemical agents andnational guidance documents for methods for the determination of hazardoussubstances.: No special ventilation requirements. Good general ventilation should be sufficient tocontrol worker exposure to airborne contaminants. If this product contains ingredientswith exposure limits, use process enclosures, local exhaust ventilation or otherengineering controls to keep worker exposure below any recommended or statutorylimits.Wash hands, forearms and face thoroughly after handling chemical products, beforeeating, smoking and using the lavatory and at the end of the working period.Appropriate techniques should be used to remove potentially contaminated clothing.Wash contaminated clothing before reusing. Ensure that eyewash stations and safetyshowers are close to the workstation location.Use a properly fitted, air-purifying or air-fed respirator complying with an approvedstandard if a risk assessment indicates this is necessary. Respirator selection mustbe based on known or anticipated exposure levels, the hazards of the product and thesafe working limits of the selected respirator.: Chemical-resistant, impervious gloves complying with an approved standard shouldbe worn at all times when handling chemical products if a risk assessment indicatesthis is necessary.: Safety eyewear complying with an approved standard should be used when a riskassessment indicates this is necessary to avoid exposure to liquid splashes, mists ordusts.Date of issue : 20/01/2012. 4
Powerflow Paste Large8. Exposure controls/personal protectionSkin protectionEnvironmental exposurecontrols: Personal protective equipment for the body should be selected based on the taskbeing performed and the risks involved and should be approved by a specialist beforehandling this product.: Emissions from ventilation or work process equipment should be checked to ensurethey comply with the requirements of environmental protection legislation. In somecases, fume scrubbers, filters or engineering modifications to the process equipmentwill be necessary to reduce emissions to acceptable levels.9. Physical and chemical propertiesGeneral informationAppearancePhysical state: Solid. [Paste.]Colour: White to yellowish.Odour: Characteristic.VOC content : 0 % (w/w) [ISO % 11890-2]10. Stability and reactivityStabilityConditions to avoidMaterials to avoidHazardous decompositionproducts: The product is stable.: No specific data.: No specific data.11. Toxicological information: Under normal conditions of storage and use, hazardous decomposition productsshould not be produced.Potential acute health effectsInhalationIngestionSkin contactEye contactAcute toxicity: Exposure to decomposition products may cause a health hazard. Serious effectsmay be delayed following exposure.: No known significant effects or critical hazards.: No known significant effects or critical hazards.: Severely irritating to eyes. Risk of serious damage to eyes.Over-exposure signs/symptoms12. Ecological informationAquatic ecotoxicityBiodegradabilityOther adverse effects: No known significant effects or critical hazards.AOX13. Disposal considerations: The product contains organically bound halogens and can contribute to the AOXvalue in waste water.Methods of disposalHazardous waste: The generation of waste should be avoided or minimised wherever possible. Emptycontainers or liners may retain some product residues. This material and its containermust be disposed of in a safe way. Dispose of surplus and non-recyclable productsvia a licensed waste disposal contractor. Disposal of this product, solutions and anyby-products should at all times comply with the requirements of environmentalprotection and waste disposal legislation and any regional local authorityrequirements. Avoid dispersal of spilt material and runoff and contact with soil,waterways, drains and sewers.: The classification of the product may meet the criteria for a hazardous waste.Date of issue : 20/01/2012. 5
<strong>Powerflow</strong> Paste Large8. Exposure controls/personal protectionSkin protectionEnvironmental exposurecontrols: Personal protective equipment for the body should be selected based on the taskbeing performed and the risks involved and should be approved by a specialist beforehandling this product.: Emissions from ventilation or work process equipment should be checked to ensurethey comply with the requirements of environmental protection legislation. In somecases, fume scrubbers, filters or engineering modifications to the process equipmentwill be necessary to reduce emissions to acceptable levels.9. Physical and chemical propertiesGeneral informationAppearancePhysical state: Solid. [Paste.]Colour: White to yellowish.Odour: Characteristic.VOC content : 0 % (w/w) [ISO % 11890-2]10. Stability and reactivityStabilityConditions to avoidMaterials to avoidHazardous decompositionproducts: The product is stable.: No specific data.: No specific data.11. Toxicological information: Under normal conditions of storage and use, hazardous decomposition productsshould not be produced.Potential acute health effectsInhalationIngestionSkin contactEye contactAcute toxicity: Exposure to decomposition products may cause a health hazard. Serious effectsmay be delayed following exposure.: No known significant effects or critical hazards.: No known significant effects or critical hazards.: Severely irritating to eyes. Risk of serious damage to eyes.Over-exposure signs/symptoms12. Ecological informationAquatic ecotoxicityBiodegradabilityOther adverse effects: No known significant effects or critical hazards.AOX13. Disposal considerations: The product contains organically bound halogens and can contribute to the AOXvalue in waste water.Methods of disposalHazardous waste: The generation of waste should be avoided or minimised wherever possible. Emptycontainers or liners may retain some product residues. This material and its containermust be disposed of in a safe way. Dispose of surplus and non-recyclable productsvia a licensed waste disposal contractor. Disposal of this product, solutions and anyby-products should at all times comply with the requirements of environmentalprotection and waste disposal legislation and any regional local authorityrequirements. Avoid dispersal of spilt material and runoff and contact with soil,waterways, drains and sewers.: The classification of the product may meet the criteria for a hazardous waste.Date of issue : 20/01/2012. 5
Change language