4775 Powerflow Flux (English (GB)) CEAMGE SDS EU ... - Toolbank

Powerflow Paste Large8. Exposure controls/personal protectionIrelandNo exposure limit value known.ItalyNo exposure limit value known.EstoniaNo exposure limit value known.LithuaniaNo exposure limit value known.SlovakiaNo exposure limit value known.HungaryNo exposure limit value known.PolandNo exposure limit value known.SloveniaNo exposure limit value known.LatviaNo exposure limit value known.GreeceNo exposure limit value known.PortugalNo exposure limit value known.Recommended monitoringproceduresExposure controlsOccupational exposurecontrolsHygiene measures :Respiratory protection :Hand protectionEye protection: If this product contains ingredients with exposure limits, personal, workplaceatmosphere or biological monitoring may be required to determine the effectivenessof the ventilation or other control measures and/or the necessity to use respiratoryprotective equipment. Reference should be made to European Standard EN 689 formethods for the assessment of exposure by inhalation to chemical agents andnational guidance documents for methods for the determination of hazardoussubstances.: No special ventilation requirements. Good general ventilation should be sufficient tocontrol worker exposure to airborne contaminants. If this product contains ingredientswith exposure limits, use process enclosures, local exhaust ventilation or otherengineering controls to keep worker exposure below any recommended or statutorylimits.Wash hands, forearms and face thoroughly after handling chemical products, beforeeating, smoking and using the lavatory and at the end of the working period.Appropriate techniques should be used to remove potentially contaminated clothing.Wash contaminated clothing before reusing. Ensure that eyewash stations and safetyshowers are close to the workstation location.Use a properly fitted, air-purifying or air-fed respirator complying with an approvedstandard if a risk assessment indicates this is necessary. Respirator selection mustbe based on known or anticipated exposure levels, the hazards of the product and thesafe working limits of the selected respirator.: Chemical-resistant, impervious gloves complying with an approved standard shouldbe worn at all times when handling chemical products if a risk assessment indicatesthis is necessary.: Safety eyewear complying with an approved standard should be used when a riskassessment indicates this is necessary to avoid exposure to liquid splashes, mists ordusts.Date of issue : 20/01/2012. 4