Construction Catalogue

“ULTRA MESH”• 50 metre long x 1 metre wide - Orange• Ideal for long term applications• U.V Resistant• Made to Australian standardCode 1-4 5-9 10-49 50+18-BMPL $68.00ea $61.20ea $54.40ea $51.00ea“ULTRA MESH” FABRIC TYPE• 50 metre long x 900mm wide with 2 orange bands• Cost effective option• U.V. resistant• Top & bottom strap for fast attachment to support postsCode 1-4 5-9 10-49 50+18-BMFA $49.90ea $46.50ea $41.00ea $39.00eaBARRIER MESH-WARRATAHS& ACCESSORIESRING FASTNER GUN• Saves time• Easy to load and use• Ideal for installing silt and barrier meshCode 1-5 6+26-JRFG $143.00ea $125.000eaRINGS-1000/PKCode 1-9 10-43 44+26-JRING $27.60ea $24.85ea $22.00eaSTAR GRIP CLIP• Save time & money installing silt & barrier mesh• Will outlast traditional methods• Just clip over the material onto the star post• 100 pieces packetsCode 1-4 5-9 10-49 50+26-SGRCL $75.50ea $69.50ea $64.35ea $57.20eaSTEEL FENCE POSTS• 1650mm long• Minimum order quantity-10Code 10-39 40-69 70-99 100+26-165SP $7.10ea $6.50ea $5.99ea $5.70eaULTRA-VIZ HIGH VISIBILITY STEEL FENCE POSTS• Increase your visibility and reduce your liability• 1650mm long• Minimum order quantity-10Code 10-39 40-69 70-99 100+165SPHV $7.90ea $7.00ea $6.60ea $6.40eaHEAVYWEIGHT POST DRIVERCode 1-2 3-5 6+26-SPD $66.30ea $55.25ea $49.70eaFENCE POST REMOVER/LIFTERCode 1-2 3-5 6+26-SPLT $155.00ea $129.00ea $115.00eaHIGH TENSILE WIRE• 4 mm galvanised• 250m coil• 25 kgCode 1-2 3+WP25 $140.00ea $120.00eaSEE PAGE 61 FOR SAFETY CAPS6 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

HIRE OR BUY !!• Heavy duty• Galvanised• Australian standards approved• Compact design for easy storage• Quick & simple to erect• No loose partsLength Load bearing capacitySize Min Max Closed Extended Net weight1 1.7 3.12 4.2t 2.54t 19.62kg3 2.5 3.95 3.6t 1.67t 23.19kgSize Code 1-9 10-49 50+1 41-BP01 $149.50 $134.10 $122.003 41-BP03 $152.10 $139.20 $129.00HIRESize Code Day Week Month 31days+1 41-BP01 $5.40ea $14.20ea $55.00ea $1.00 per day3 41-BP03 $5.60ea $14.40ea $57.00ea $1.00 per dayTARPS• Heavy Duty made from 14 x14 weave (250gsm)• Reinforced polyethylene, with rope in hem• Reinforced corners for extra strength & durability• Colour: silver/blackCode Size 1-9 10+44-2430T 2.4m x 3m $29.25ea $23.40ea44-3654T 3.6m x 5.4m $78.00ea $62.40ea44-4873T 4.8m x 7.3m $136.50ea $109.20ea44-9191T 9.1m x 9.1m $354.25ea $283.40eaBUILDERS PROPS, TARPS, NETTINGDUCT TAPE• Grey PVC joining & duct tape rolls 48mmx30m• Heavy Duty 150µmCode 1-9 10-29 30-70 80+80-204 $6.30ea $6.00 $4.80ea $3.70eaBLACK PLASTIC• 50m x 4m x 200µm heavy duty plastic• Protection, asbestos removal and much more.Code 1-10 11-24 25+44-BLKPLAS $160.00ea $145.00ea $135.00eaSCAFFOLD NETTING• Heavy Duty scaffold netting• 50m x 1.8m• Colour: GreenCode 1-9 10+43-SCAFNET $175.50ea $156.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE7

JIGSAW BLADES• Made in Germany• 5 pc packetsShank type31 33 34 SERIES31 series 33 series 34 series 1-3 4-9 10+Timber 3101 3301 3401 $16.95ea $13.50ea $9.40eaTimber-fast cut 3104 3304 3404 $13.45ea $10.45ea $7.45eaSteel to 1.5mm 3110 3310 3410 $16.95ea $13.50ea $9.40eaSteel to 3.2mm 3113 3313 3413 $16.95ea $13.50ea $9.40eaJIGSAW / TCT BLADESSABRESAW BLADES• Made in Germany• 2 pc packets• Universal shank suits all common brandsApplication Length(mm) Code 1-3 4-9 10+Wood & Plastic-fast cut 130 4011 $11.15ea $9.60ea $6.20ea280 4010 $17.60ea $13.10ea $9.80eaSteel,pipe &alloy 3-8mm 80 4410 $12.80ea $10.20ea $7.10ea130 4411 $16.50ea $13.20ea $9.20ea180 4415 $20.40ea $16.10ea $11.35ea280 4422 $25.40ea $19.10ea $14.10eaWood with nails 130 4430vp $16.50ea $13.20ea $9.20ea180 4431vp $19.20ea $14.60ea $10.70ea280 4432vp $26.60ea $19.80ea $14.55eaSAW BLADES• Tungsten tipped• Affordable quality bladesCode Dia(mm) No of teeth Bore(mm) Bush(mm) 1-3 4+Rad16002420 160 24 20 16 $19.40ea $16.50eaRad16004020 160 40 20 16 $23.40ea $19.90eaRad18002420 180 24 20 16 $19.40ea $16.50eaRad18004020 180 40 20 16 $23.40ea $19.90eaRad20002425 210 24 25 16 $26.05ea $22.20eaRad20004025 210 40 25 16 $30.70ea $26.10eaRad23502425 235 24 25 16 $29.90ea $25.40eaRad23504025 235 40 25 16 $33.80ea $28.70eaRad25004030 250 40 30 $38.90ea $32.40eaLinbide Series 330 TCT Blades330-300048 300 48 $199.00ea $175.00ea330-350054 350 54 $290.50ea $248.86eaGENERAL PURPOSE TUNGSTEN SCRAPER• Fast hook scraper with 50mm wide blade• Will scrape paint,glue,timber• Double edged bladeCode 1-4 5+GP50 $13.65ea $11.20eaReplacement blades• 1 pair per packetCode 1-4 5+GP502-2 $12.30ea $11.00ea8 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

PLASTER SAW• Utility saw for plasterboard,plywood etc• Cuts in both directions• Ground tip for easy penerationCode 1-4 5+S3406 $13.50ea $12.50eaMEGA SAW• Large cushion grip• Fast cutting in both directions• Razor sharp tip for easy penerationCode 1-4 5+S4406 $28.45ea $26.30eaRIP SAW• Heavy duty rip saw• Unbreakable solid handle• 380mm long-8 pointCode 1-4 5+S9021 $13.80ea $12.80eaRIP SAW• Heavy duty rip saw• Mega grip soft handle• Cuts in both directions• 500mm long-5 pointCode 1-4 5+S6220 $20.25ea $18.70eaTIMBER DRILLING - SPADE BITS• Micro grooved cutting edge for fast & smooth drilling• 160mm overall lengthCode Size(mm) 1-5 6+88906 6 $8.77ea $8.10ea88908 8 $8.77ea $8.10ea88910 10 $9.98ea $9.23ea88912 12 $9.98ea $9.23ea88913 13 $9.98ea $9.23ea88914 14 $10.33ea $9.55ea88916 16 $10.84ea $10.05ea88918 18 $10.84ea $10.05ea88919 19 $10.84ea $10.05ea88920 20 $11.58ea $10.70ea88922 22 $11.58ea $10.70ea88924 24 $12.19ea $11.30ea88925 25 $12.19ea $11.30ea88928 28 $17.24ea $15.95ea88930 30 $17.24ea $15.95ea88932 32 $17.24ea $15.95ea88935 35 $17.24ea $15.95ea88936 36 $17.24ea $15.95ea88938 38 $17.24ea $15.95eaHANDSAWS / DRILL BITSMITRE BOXES• Laminated plywood mitre boxes foraccurate cutting of cornice.• All boxes are screwed and glued for extradurability• Cuts 90 0 & 135 0• Suitable for 55,75 & 90mm corniceCode 1-4 5+M0579 $25.20ea $22.50ea• Sliding supports for firmly holdingdifferent sizes• Rubber feet to stop sliding• Cuts 90 0 & 135 0• Suitable for 55,75,90mm corniceCode 1-4 5+M0230 $117.00ea $105.00eaAUGER BITS• 400mm overall length• Sizes 6 - 25mm can be used in a 10mm+ drill• Sizes 26mm + to be used in a 13mm drill available onrequestCode Size(mm) 1-5 6+000427 6 $31.70ea $29.30ea000428 8 $32.50ea $30.05ea000429 10 $34.48ea $31.90ea000430 12 $38.05ea $35.50ea000431 13 $38.05ea $35.50ea000432 14 $39.20ea $36.25ea000433 16 $42.64ea $39.45ea000434 18 $47.36ea $43.80ea000435 19 $47.36ea $43.80ea000436 20 $47.36ea $43.80ea000437 22 $55.43ea $51.30ea000438 24 $62.41ea $57.70ea000439 25 $62.41ea $57.70eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE9

CHISELS• Ergonomic soft grip handle• One piece forging for strength• Striking capCode Size (mm) 1-4 5+10504000 6 $18.20ea $16.80ea10504001 13 $18.20ea $16.80ea10504002 19 $19.20ea $17.75ea10504003 25 $20.80ea $19.20ea10504004 32 $24.40ea $22.50ea10504005 38 $31.00ea $28.60ea10504006 50 $42.05ea $38.90ea10504007 6,13,19,25 $78.00 ea $71.90ea3 PIECE BEVEL EDGE CHISEL SET WITH PRO TOUCHGRIP• High impact non slip handle• Striking cap• Rugged storage caseCode Size(mm) 1-4 5+10503426 13.19.25 $68.80ea $63.60eaHAND TOOLSBAR CLAMPS• Quick change multi-positioning jaw• Convert to a spreader- no tools required• Non marring stay-on pads• Pistol grip trigger for fast & easy positioning• Quick advance trigger which moves 2 times faster thanprevious versionsCode Jaw opening 1-4 5+QG506QC 150mm $36.80ea $34.05eaQG512QC 305mm $39.99ea $36.95eaQG518QC 455mm $44.80ea $41.40eaQG524QC 610mm $47.99ea $44.40eaQG536QC 915mm $52.80ea $48.80eaCOMBINATION SQUARE• 300mm steel bladeCode 1-2 3+SQ300 $18.50ea $14.80eaCARPENTERS SQUARE• 600mm x 400mm• Metric & imperial measurements printedCode 1-2 3+RS6040 $19.90ea $15.90eaT SQUARES• Heavy Duty - 5mm thick• Metric calibrations - easy read1200mmCode 1-2 3+TSQ12 $77.50ea $69.50ea1350mmCode 1-2 3+TSQ13 $85.00ea $76.50eaFIBERGLASS FOLDING RULE• 1mt - 4 fold• Bevelled egde• Yellow fiberglassCode 1-2 3+59Y-16 $37.00ea $29.10ea10 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

CLOSED REEL - FIBREGLASS TAPE• Metric/Imperial increaments30mtCode 1-2 3+C-TACR03 $27.30ea $21.80eaOPEN REEL - FIBREGLASS TAPE• Metric/Imperial increaments30mtCode 1-2 3+C-TAOR03 $30.30ea $24.20ea50mtCode 1-2 3+C-TAOR05 $46.85ea $37.30ea100mtCode 1-2 3+C-TAOR10 $101.65ea $81.00eaMEASURINGPLASTERX PROFESSIONAL• 25mm blade• Metric on blade• Rubber case for comfort• Belt clipCode Length 1-9 10+T8025 8mt $9.95ea $8.90eaT1025 10mt $14.95ea $11.50eaMEGAGRIP• Protective & comfortable rubberised case• Finger brake on side for slowing blade return• Magnetic triple riveted blade tip• 10m x 25mmCode Length 1-9 10+TMT-25 10mx25mm $15.00ea $13.50eaFAT JACK• Protective & comfortable rubberised case• Finger brake on side for slowing blade return• Triple riveted blade tip• 10m x 32mmCode 1-9 10+TFJ32 $20.70ea $18.60eaMEASURING WHEEL• Robust construction• Analogue readout• Made in SwitzerlandCode 1-3 4+M100 $299.00ea $275.00ea12 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

KNIVES• Plastic retractable cutting knife• 18mm wide blade• Minimum order qty - 10Code 10-50 60+S060031 $1.20ea $0.99ea• Autoload blade change• 5 blade magazine• Alloy constructionCode 1-9 10+KPA55 $15.00ea $12.50ea• Super heavy duty knife• Fixed blade• Quick change blade• Supplied with holsterCode 1-9 10+K2006 $16.80ea $14.30eaHEAVY DUTY KNIFE BLADES• Blades to suit KPA55 & K2006• Kept in a saftey dispenser10 pc packCode 1-9 10+BR-00001 $5.50ea $4.20ea100 pc packCode 1-9 10+BR00008 $41.20ea $30.00eaSNIPS• Cuts 1.2mm cold rolled steel & 0.7mm stainless• Serrated teethStraight cut-yellowCode 1-9 10+BR-01030 $24.60ea $19.50eaKNIVES / SNIPS / SCAPER / HACKSAWRight cut-greenCode 1-9 10+BR-01020 $24.60ea $19.50eaLeft cut-redCode 1-9 10+BR-01010 $24.60ea $19.50eaFLOOR SCRAPER• Heavy Duty scrapers for concrete floors• 350mm wideCode 1-4 5+FS214 $53.00ea $43.20eaReplacement BladeCode 1-9 10+FSB04 $10.75ea $9.70eaHACKSAWCode 1-3 4+BR-00051 $25.20ea $23.30eaHACKSAW BLADES• Starrett• 300mm x 18 tpiCode 1-49 50+8300345 $2.00ea $1.85ea• 300mm x 24 tpiCode 1-49 50+8300346 $2.00ea $1.85ea• 300mm x 32 tpiCode 1-49 50+8300347 $2.00ea $1.85eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE13

STRINGLINE• 80mt StringlinewhiteCode 1-5 6+CM80 $19.90ea $15.90eaFluro yellowCode 1-5 6+CM80FL $19.90ea $15.90eaCHALK LINE REELS• Alloy case - 30mt lineCode 1-5 6+A020330 $10.90ea $8.70eaCHALKLINE / CHALK REFILLSSTANLEY HEAVY DUTY CONSTRUCTION• 30mt line• Quick RetrieveCode 1-5 6+ST47-200 $19.90ea $15.90eaCHALK REEL SET• A kit including high visibility plastic case,30m chalkline, 4oz blue chalk refill and APS line level.Code 1-5 6+CL14B $16.50ea $14.85eaCHALK REFILLS• Moisture proof bottles• Easy twist open/close lidRedCode 1-5 6+HA11040 $4.95ea $4.45eaWhiteCode 1-5 6+HA11041 $4.95ea $4.45eaBlueCode 1-5 6+HA11042 $4.95ea $4.45eaYellowCode 1-5 6+HA11043 $4.95ea $4.45eaGlow orangeCode 1-5 6+HA11044 $4.95ea $4.45ea14 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

CONTRACTOR CLUB HAMMER• Fiberglass handle• 1.8kg/4lbsCode 1-3 4+C-HACL04 $24.60ea $19.70eaESTWING HANDY BARCode size 1-2 3-5 6+HB-15 380mm $33.60ea $29.90ea $26.20eaESTWING CLUB HAMMER• Shock reduction grip1.3kg/3lbsCode 1-2 3-5 6+E-B3-3LB $75.70ea $67.30ea $58.90ea1.8kg/4lbsCode 1-2 3- 5 6+E-B3-4LB $85.35ea $75.85ea $66.40eaESTWING PRO CLAW NAIL PULLERCode size 1-2 3-5 6+EPC300 305mm $35.70ea $31.80ea $27.80eaCONTRACTOR DEMOLITION HAMMER• Fibreglass handle• 1.8kg/4lbsCode 1-3 4+C-HADE04 $29.00ea $23.30eaCONTRACTOR SLEDGE HAMMER• fibreglass handle3.15kg/7lbsCode 1-3 4+C-HASL07 $60.80ea $48.60eaRHINO ANTI-VIBE HAMMER• One piece steel• Rhino soft grip handle with new anti-vibrationtechnologyCode 1-5 6+BR-00070-20oz $57.95ea $46.40eaHAMMERS / CLUB / SLEDGE / BARS4.5kg/10lbsCode 1-3 4+C-HASL10 $70.30ea $56.20ea6.35kg/14lbsCode 1-3 4+C-HASL14 $83.60ea $66.80eaESTWING - SHOCK REDUCTION GRIPCode 1-2 3-5 6+E3-20C 20oz $79.70ea $71.00ea $62.00eaE3-28C 24oz $92.50ea $82.10ea $71.90eaAXIS SLEDGE HAMMER• Wooden handle1.8kg/4lbsCode 1-3 4+A-080204 $59.80ea $47.80ea3.15kg/7lbsCode 1-3 4+A-080207 $79.80ea $63.80ea4.5kg/10lbsCode 1-3 4+A-080210 $115.70ea $92.50ea6.35kg/14lbsCode 1-3 4+A-080214 $129.70ea $130.80eaESTWING - LEATHER GRIPCode 1-2 3-5 6+E20C 20oz $82.60ea $73.40ea $64.30eaESTWING - FRAMMING HAMMER• Shock reduction handleCode 1-2 3-5 6+E3-28S 28oz $99.00ea $88.95ea $77.85eaCONTRACTOR DEMOLITION BARSCode size 1-4 5+C-BAWR12 300 x 12 $8.55ea $6.85eaC-BAWR18 450 x 16 $14.25ea $11.40eaC-BAWR24 600 x 19 $19.95ea $15.95eaC-BAWR30 700 x 19 $25.65ea $20.50eaC-BAWR36 900 x 19 $31.35ea $25.00eaPLASTEREX - PLASTERBOARD HAMMER• Shock reduction handle• Checked head for setting nails perfectlyCode 1-5 6+HX-311 $57.50ea $46.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE15

Atlas contractors tools made in NZWooden and fibreglass handle optionsROUND MOUTH SHOVEL• Long handleCode: Handle 1-4 5+AT01604 Wooden $64.60ea $51.70eaAS00600 Fibreglass $78.00ea $62.40eaD-HANDLE ROUND MOUTH SHOVELCode: Handle 1-4 5+AT01605 Wooden $63.00ea $50.50eaAS00602 Fibreglass $78.00ea $62.40eaD-HANDLE SQUARE MOUTH SHOVELCode: Handle 1-4 5+AT02615 Wooden $69.40ea $55.20eaAS00615 Fibreglass $78.00ea $62.40eaCONTRACTORS TOOLSCONTRACTORS SPADECode: Handle 1-4 5+AT04630 Steel $54.40ea $43.50eaAS00630 Fibreglass $78.00ea $62.40eaPICK MATTOCK• 5lbsCode: Handle 1-4 5+AT07150 Wooden $52.70ea $42.20eaA00150 Fibreglass $62.00ea $49.60eaPICK AXE• 5lbsCode: Handle 1-4 5+AT07160 Wooden $52.60ea $42.20eaAS00160 Fibreglass $62.00ea $49.60eaDOUBLE ENDED GRUBBER• 900mm handleCode: Handle 1-4 5+AT05107 Wooden $35.80ea $28.70eaRAKE• Braced for extra strength• 16 toothCode: Handle 1-4 5+AT05106 Wooden $29.00ea $25.40eaAS00106 Fibreglass $49.90ea $40.00eaCABLE TRENCHING SHOVEL-NARROW• Deep sideCode: Handle 1-4 5+AT03615 Wooden $62.00ea $49.60eaD-HANDLE TRENCHING SHOVEL• Deep sideCode: Handle 1-4 5+AT03616 Wooden $62.00ea $49.60eaD-HANDLE TRENCHING SPADE• Deep reachCode: Handle 1-4 5+AT04638 Steel $98.00ea $79.00eaAS00638 Fibreglass $78.00ea $62.40eaFULL RANGE OF ATLAS TOOLS& ACCESSORIES AVAILABLEPLEASE ENQUIRE16 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

TIE WIRE REEL• Alloy constructionCode 1-5 6+C-TWRE01 $57.00ea $45.00eaTIE WIRE PULLER• Made in Germany• Duragrip soft handleCode 1-5 6+A-230231 $61.75ea $49.20eaEND CUTTING NIPPERS-SMALL HEAD• Made in GermanyCode Length 1-4 5+0-93220 220mm $40.80ea $32.60ea0-93250 250mm $44.85ea $35.90ea0-93280 280mm $49.50ea $39.60eaEND CUTTING NIPPERS-WIDE HEAD• Made in GermanyHAND TOOLSCode Length 1-4 5+0-39180 180mm $51.30ea $41.00ea0-39200 200mm $56.00ea $44.00eaBOLT CUTTERS-RATED TO CUT HRC49Code Length 1-4 5+A-230118 450mm $57.00ea $45.60eaA-230124 600mm $70.00ea $55.00eaA-230130 750mm $98.50ea $75.00eaA-230136 900mm $120.00ea $95.00eaA-230142 1050mm $250.00ea $199.00eaROD CUTTER BENDER• Cuts and bends reinforcing rod up to 16mmCode 1 2+HRC16B $760.60ea $650.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE17

BARRIER TAPE• 100mm x 300 metre roll• Bright colours & large printCode Description 1-9 10+7500 Water mains below $48.00ea $42.00ea7501 Sewer line below $48.00ea $42.00ea7502 Danger keep out (black on red) $48.00ea $42.00ea7506 Danger keep out (red on white) $48.00ea $42.00ea7503 Caution $48.00ea $42.00ea7504 Keep clear $48.00ea $42.00ea7505 Electrical cable below $48.00ea $42.00eaBARRIER TAPE / STICKING TAPEELECTRICAL TAPE• 18mm x 20 metre rollCode Colour 1-19 20+1161 Black $1.60ea $1.40ea1162 Red $1.60ea $1.40ea1163 Blue $1.60ea $1.40ea1164 Yellow $1.60ea $1.40ea1165 White $1.60ea $1.40ea1166 Green $1.60ea $1.40eaDUCT TAPE• Grey PVC joining tape tape• Very heavy duty-150µm• 48mm x 30 metre rollCode 1-9 10-30 40-70 80+80-204 $6.30ea $6.00ea $4.80ea $3.70eaMASKING TAPE• 50 metre rollCode Width(mm) 1-9 10-19 20+1242 19 $2.90ea $2.70ea $2.50ea1243 25 $3.70ea $3.50ea $3.20ea1244 38 $5.20ea $5.00ea $4.90ea1245 50 $6.90ea $6.80ea $6.60ea1246 75 $10.60ea $10.40ea $10.20eaDOUBLE SIDED TAPE• 50 metre rollCode Width(mm) 1-9 10-19 20+1662 12 $5.80ea $5.60ea $5.40ea1665 25 $10.20ea $10.00ea $9.80ea1668 50 $20.00ea $19.80ea $19.60eaOUTDOOR REPAIR TAPE• Designed for intense and exposed outdoor use• Long term resistance to UV rays• 100 metre rollCode Width(mm) 1-9 10+1145 48 $28.00ea $25.90ea1146 72 $42.00ea $38.85ea1147 96 $56.00ea $51.80ea18 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

INTERNAL FINISHING CORNER TOOL -103º• Mega -grip Soft HandleCode 1-4 5+CT285 $18.30ea $14.95eaINTERNAL FINISHING CORNER TOOL - 90º• Wooden handleCode 1-4 5+C00V4 $12.00ea $9.85eaINTERNAL FINISHING CORNER TOOL - 103º• PlasticCode 1-4 5+CP005 $3.30ea $2.75eaINTERNAL FINISHING CORNER TOOL• Adjusts to all angles requiredCode 1-4 5+CTA01 $55.30ea $45.20eaJOINT KNIVES• STAINLESS STEEL BLADE• Full tang constuction for long life• Premium qualitiy• 12 month warrantyPLASTERING TOOLSCode Description Width 1-4 5+Plastic HandleJ2070 Scraper 76mm $9.15ea $7.80eaJ2080 Joint knife 102mm $11.00ea $8.90eaJ2090 Joint knife 127mm $12.50ea $10.20eaJ2100 Joint knife 152mm $14.30ea $12.00eaJ2120 Joint knife 254mm $31.30ea $25.60eaMEGA-GRIP Soft HandleJ2220 Putty knive 32mm $8.00ea $6.60eaJ2240 Puttyknive 51mm $9.20ea $7.50eaJ2270 Scraper 76mm $11.35ea $9.25eaJ2280 Joint knife 102mm $12.90ea $10.50eaJ2290 Joint knife 127mm $14.00ea $11.40eaJ2300 Joint knife 152mm $15.50ea $12.70eaJ2320 Joint knife 254mm $46.20ea $37.80eaHammer End - MEGA-GRIP Joint KnivesJ3220 Putty knife 32mm $9.20ea $7.50eaJ3240 Putty knife 51mm $11.70ea $9.60eaJ4260 Scraper 76mm $16.30ea $13.30eaJ4280 Joint knife 102mm $17.20ea $14.00eaJ4290 Joint knife 127mm $18.00ea $14.70eaJ4300 Joint knife 152mm $18.50ea $15.10eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE19

PLASTEREX TROWELSMEGA GRIP HANDLE• Available in either carbon or stainless steel• Strong & lightweight• 12 MONTH WARRANTY• Professional quality• Easy cleaningCode Description Length 1-4 5+TPF200 Trowel-flat 200mm $34.65ea $25.20eaTPC200 Trowel-curved 200mm $38.00ea $27.60eaTPS200 Trowel-flat-stainless 200mm $41.00ea $30.60eaTPF280 Trowel-flat 280mm $34.65ea $25.20eaTPC280 Trowel-curved 280mm $41.00ea $30.60eaTPS280 Trowel-flat -stainless 280mm $43.75ea $31.80eaTPF355 Trowel-flat 355mm $43.75ea $31.80eaTPF455 Trowel-flat 455mm $51.20ea $37.20eaPLASTERING TOOLSTAPING KNIVES• Stainless steel bladeCode Width 1-4 5+TKM08S 200mm $15.50ea $11.40eaTKM10S 250mm $16.70ea $12.20eaTKM12S 300mm $18.75ea $13.70eaSMALL TOOLSCode Size 1-4 5+ST012 12mm $16.10ea $11.70eaST018 19mm $16.10ea $11.70eaST025 25mm $16.10ea $11.70eaPLASTERERS HAWKS MEGA-GRIP SOFT HANDLE• 300 x 300mm plateCode 1-4 5+H6425 $46.20ea $33.80eaMUD PAN• Stainless steel construction• 300mm wideCode 1-4 5+MP712 $35.50ea $25.80eaPANEL CARRIER• Labour saving innovation - saves your back• Low loading height at 100mm• Big 125mm wheels to roll over clutter• 150kg capacityCode 1-4 5+SBR-54 $121.50ea $109.00eaPLASTERBOARD LIFTER• Robust fully welded construction• 68 Kg capacity• Lifts to 3350mm• Height extension to 4570mm available• Width extension kit to 6000mm available• Dismantles for easy transportCode 1-2 3+PL335 $1950.00ea $1800.00ea20 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

• Applies base compound and tape in just one step• Gives you professional results, fast and easilyHolds tape roll sizesup to 150m• Unique design for trade and DIYTAPING BOX• Applies compound & joint tape in just one easystep• Adjustable control knob for a consistent coat ofcompound• Holds over 2 kg of compound• Easy to cleanCode 1-4 5+TX650 $143.50ea $104.50ea• Spare parts availableCompound controlknobTape dispensinggearsAdjustable nylon sidehandleHolds over 2kg of compoundPAPER JOINT TAPE DISPENSER• Holds 75mt & 150mt rolls• Dispenses tape folded or flatCode 1-4 5+TD009 $19.80ea $14.50eaReplacement blade• 6 pc packCode 1-4 5+TDB49 $1.70ea $1.20eaFIBREGLASS JOINT TAPE DISPENSER• Trigger activated cut off blade• Flip down roller for easy internal corner applicationCode 1-4 5+TFG50 $69.50ea $50.40eaPLASTERING TOOLSCORNER BEAD TOOL• For installing external angles without nails• One blow from a mallet crimps both sides of angleCode 1-4 5+CB000 $77.00ea $55.50eaReplacement Lambswool BonnetCode 1-4 5+CRL02 $16.95ea $12.30eaCORNER ROLLER• For applying compound to internal corners• 355mm handle with thread to allow for extensionCode 1-4 5+CRL01 $61.00ea $44.50eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE21

POLY SPONGE FLOAT280 x 120mmCode 1-5 6+PS-272 $19.95ea $15.80ea340 x 160mmCode 1-5 6+LPS-272 $22.90ea $18.30eaPOLY SPONGE FLOAT• Duragrip Handle310 x 130mmCode 1-5 6+FSP1331 $26.00ea $20.80eaFLOATSLIGHTWEIGHT - POLYURETHANE FLOATS120 x 240Code 1-5 6+A010212 $14.25ea $11.40ea180 x 320Code 1-5 6+A010218 $23.60ea $18.90ea220 x 420Code 1-5 6+A010222 $31.35ea $25.00ea80 x 260Code 1-5 6+A010208 $11.30ea $9.05ea108 x 280Code 1-5 6+PF1C $16.40ea $13.10ea150 x 340Code 1-5 6+PF2C $19.50ea $15.60eaPOLYSTYRENE FLOAT - BOAT SHAPE350 x 210mmCode 1-5 6+A012718 $24.50ea $19.60eaRUBBER SPONGE FLOAT120 x 240mmCode 1-5 6+A012612 $23.75ea $19.00ea140 x 280mmCode 1-5 6+A012614 $30.50ea $24.40ea22 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

PLASTIC FLOAT• Diamond Pattern Base• 270mm x 140mm - pointedCode 1-4 5+A012027 $15.70ea $12.00eaPLASTER SCOOP• Galvanised pan• Bucket hand hook• Mega grip soft handleCode 1-4 5+A010718 $30.20ea $24.20eaSPLATTER MACHINE• Brass coated - sturdy design• Made in ItalyCode 1-3 4+VELOXBP $112.50ea $89.00eaHOPPER SPRAYER• Ideal for spraying masonary renders andconcrete resurfacing products• 8L capacityCode 1-3 4+A040308 $170.00ea $140.00eaTEXTURING & RENDERING TOOLSALUMINIUM HAWK• Heavy Duty Construction• 330mm x 330mmCode 1-4 5+A010513 $47.50ea $38.00eaMEGA GRIP SOFT HANDLEANCORA PLASTERING TROWEL150mm x 51mmCode 1-4 5+PE2906006 $28.00ea $22.00ea200mm x 51mmCode 1-4 5+PE2906015 $30.00ea $25.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE23

BRICK TROWEL• London style• Duragrip handle• 302mmCode 1-5 6+A-011112 $54.00ea $45.50eaLINE PINS• 160mmCode 1-9 10+A-100101 $7.20ea $5.70eaBRICK TROWEL• Philadelphia style• Duragrip handle• 302mmCode 1-5 6+A-011212 $54.00ea $45.50eaDUTCH PINS - SEMI ROUND• 150mmCode 1-5 6+A-100615 $11.20ea $8.95eaBRICK & BLOCK TOOLSLINE BLOCK• Flurorescent rubber• Made in AustraliaCode 1-5 6+RG-LB $12.50ea $10.00eaMORTAR SMOOTHING TOOL• Duragrip handleCode size 1-5 6+A-011506 6mm $11.80ea $9.45eaA-011508 8mm $11.80ea $9.45eaA-011510 10mm $12.35ea $9.90eaA-011512 12mm $12.35ea $9.90eaBRICKLAYERS SPONGE• 200 x 120 x 40mmCode 1-49 50+BS-1 $3.80ea $3.00eaKNEELING BOARD• 350 x 480mmCode 1-5 6+A-240300 $30.00ea $24.00eaBRICK JOINTER• Rubber handle• Zinc platedCode size 1-5 6+A-030310 10mm $14.25ea $11.40eaA-030312 12mm $15.70ea $12.60eaA-0303316 16mm $18.25ea $14.60eaTIMBER FLOAT• Duragrip handle• Hardwood baseCode size 1-5 6+A-012212 112x300mm $26.50ea $21.20eaA-012215 112x380mm $28.40ea $22.70eaA-012218 112x450mm $30.00ea $24.00eaBRICK BOLSTER• With hand guard• 115mm wideCode 1-5 6+C-BOBR46 $45.50ea $36.40eaBRICK CARRIER• Adjustable• Holds 8 -12 bricksCode 1-5 6+A-170350 $33.25ea $26.50eaELECTRICIANS BOLSTER• With hand guard• 56mm wideCode 1-5 6+C-BOEL22 $24.30ea $19.40eaROLLER RACKER• Duragrip handleCode 1-5 6+A-030115 $30.50ea $24.50ea24 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

MASONARY BRUSH• 5 row - 100mm fibre bristle• 170mm wooden handle• 65mm wide baseCode 1-3 4+BL526 $34.90ea $31.50eaTIMBER BACKED SCRUBBINGBRUSHCode 1-3 4+C-BRSC01 $7.20ea $5.80eaTIMBER BACKING MULTI PURPOSEBRUSHCode 1-3 4+BB290 $15.90ea $14.10eaDISTEMPER BRUSH• 125mm bristles• 200mm wooden handleCode 1-3 4+WB78 $27.50ea $22.50eaRUBBER BUCKET• 10L• Metal handleCode 1-3 4+JAR2013 $37.90ea $34.50eaBRUSHES & BUCKETSRUBBER BUCKET WITH POURINGLIP• 15L - Metal handleCode 1-3 4+JAR2008 $43.90ea $39.00eaRUBBER BUCKET• 40L - Moulded handlesCode 1-3 4+JAR2012 $48.90ea $43.50ea15L DUAL SPOUTCode 1-3 4+1121 $19.90ea $16.90ea12L BUCKETCode 1-3 4+56200 $12.90ea $10.90eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE25

PLASTERX SPIRIT LEVELS• Heavy duty ribbed box section for strength• 3 shockproof vials• Suitable for horizontal & vertical measuring1200mmCode 1-5 6+LL120 $46.00ea $41.00ea2000mmCode 1-5 6+LL200 $65.00ea $58.00eaULTRALEVEL• New Levels of Quality • High Tensile Centre Support Bars • Milled Working Surfaces • Slip Resistant Wall Pads • Heavy Duty Alloy Box Section• Electronic High Resolution Vial Setting • Vials Set In resin for strength • U.V Resistant Vials -Won’t FadeCode No of vials LengthHorizontal/Vertical inchs mm 1-5 6+UL-040 1 1 16 400 $76.00ea $70.00eaUL-060 1 2 24 600 $91.00ea $81.90eaUL-090 1 2 35 900 $97.50ea $87.75eaUL-120 1 2 48 1200 $115.00ea $103.50eaUL190 1 2 77 1980 $165.80ea $149.00eaUL-240* 2 2 94 2400 $252.00ea $230.00ea*denotes that do not have a double milled surfaceSPIRIT LEVELS / SCREEDSSTRAIGHT EDGE (70MM X 20MM)Code Length 1-5 6+ULSE21 2100mm $69.00ea $62.50eaULSE24 2400mm $79.00ea $71.00eaULSE30 3000mm $89.00ea $81.00eaSCREED (CLAMPED HANDLE - STANDARD)Code Length 1-5 6+ULSE12 1200mm $69.50ea $62.50eaULSC15 1500mm $79.50ea $72.50eaULSC18 1800mm $87.50ea $78.50eaULSC24 2400mm $109.00ea $98.50eaULSC30 3000mm $125.00ea $112.50eaULSC36 3600mm $145.00ea $132.00eaTELESCOPIC HANDLE (TO SUIT BULLFLOAT)Code Length 1-5 6+ULTH50 2700-5000mm $125.00ea $110.00eaULTH24 1300-2500mm $125.00ea $110.00eaALUMINIUM BULLFLOATCode Length 1-5 6+ULAB09 900mm $115.00ea $103.50eaULAB12 1200mm $130.00ea $117.00eaSEE MARSHALLTOWN RANGEPAGE 51-52E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE29

SCAFPRO SPIRIT LEVEL• Magnetic base• Magnified centre vial• 250mm long• Includes holsterCode 1-2 3+UL25 $8.55ea $6.85eaENGINEERS LEVEL• 1200mm long• Heavy duty profile with magnetic base• 3 vials for greater accuracy including one adjustable vialCode 1-2 3+LM120 $49.50ea $44.50eaDIGITAL LEVELS / MAGNETICDIGITAL LEVELS• Shows direction of difference from level or plumb • Degrees & percent• Large LCD display turns upside down automatically for easy overhead visability• Robust alloy profile with V • Audilible signal at 0˚& 90˚• Hold button • Groove for round surfaces• If dropped it can be re-calbilrated on site by yourself• 0.1% accuracy • Made in SwitzerlandCode Length(mm) With magnet 1-2 3+P250 250 No $285.00ea $245.00eaP250M 250 Yes $295.00ea $250.00eaP350 350 No $295.00ea $250.00eaP600 600 No $295.00ea $250.00eaP600M 600 Yes $305.00ea $260.00eaP1000 1000 No $335.00ea $276.25eaP1800 1800 No $380.00ea $325.00eaPADDED CARRY CASESCode 1-2 3+C250 $15.00ea $12.00eaC400 $20.00ea $16.00eaC600 $25.00ea $20.00eaC1200 $35.00ea $28.00eaDIGITAL ELECTRONIC LASER LEVEL• Ideal for projecting angles or slopes over longer distances• All angles are shown in degrees or percentages• 0.1% accuracy• Rechargeable battery,charger included• Inclinometre-360 0 , 4 x 90 0• Battery life-25 hours• Supplied in a padded carry case350mm longCode 1-2 3+LS350 $610.00ea $518.50ea600mm longCode 1-2 3+LS600 $635.00ea $539.75eaDIGITAL PROTRACTORS - ACCURATE,RELIABLE,ROBUST• The W40 and W60 can measure angles on the construction site.• The flat profile can measure angles in any direction and measurements can be takendirectly from the construction plans.• High accuracy measurements saves time and costly mistakes.• The oversize LCD display eliminates reading mistakes common with dial typeprotractors• The design of the profile allows the legs to be made longer by simply laying yourbuilders level on the profile.• Measures all angles from 0 0 - 185 0 with high accuracy and repeatability• 370 or 500mm long• 0.2% accuracy• Digital display for quick reading• Fast angle setting• Made in Germany370mm longCode 1-2 3+W40 $395.00ea $335.00ea500mm longCode 1-2 3+W60 $570.00ea $485.00ea30 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

ELECTRICAL PROTECTION-LIFEGUARDLifeguard is a tempory power reticulation system which will reduce your site establishmentcosts,provide a safer enviroment for your staff and simplifies changesas your site expands.The incorporated RCD’s constantly monitor current through the phase and neutralconductors.Should a tool or a wiring fault develop,causing current leakage toearth ,the residual current device removes the power supply to the socket.Lifeguard is manufactured from high impact polyethylene which is resistant tocorrosion and is especially suitable for use on rugged construction sites.CERTIFIED FOR USE ONCONSTRUCTION SITESAS/NZS3012Lifeguard 16-rated to 32amps• Supply input power:32A 3phase + N + E 415VAC• Frequency:50-60Hz• RCD:4 pole 30mA 230-415VAC• Socket outlets:8 x 15A auto switched outlets with2P 240v RCDS1 x 32A three phase 3P + E 415VAC1 x 16A single phase 2P + E32A 3 phase + N + E 415VAC,BS4343,CEE17• Interconnection: IEC 309,watertight• Weight:15kg• Enclosure:Polyethylene• Colour:Safety yellowCode 1 2+LG16 $2464.00ea $2310.00eaLifeguard 17-rated to 63amps• Supply input power:63A 3 phase + N +E 415VAC• Frequency:50-60Hz• RCD:4 pole 30mA 230-415 VAC• Socket outlets:12 x 15A auto switched outlets with 2P 240v RCDS3 x 32A three phase 3P + 415VAC1 x LG16 Take-off1 x 16A single phase 2P + E63A 3 phase + N + E 415VA,BS4343,CEE17• Interconnection:IEC 309,watertight• Weight:20kg• Enclosure:Polyethylene• Colour:Safety yellowCode 1 2+LG17 $3920.00ea $3675.00eaELECTRICAL PROTECTION-LIFEGUARDEARTH SCREENED SAFETY CABLESCode Length(mt) Amp rating 1-2 3+ESSC3210 10 32 $398.00ea $363.00eaESSC3220 20 32 $761.00ea $696.00eaESSC3230 30 32 $1025.00ea $937.00eaESSC6310 10 63 $722.00ea $660.00eaESSC6320 20 63 $1331.00ea $1108.00eaESSC6330 30 63 $1695.00ea $1548.00eaLG7 front viewPORTABLE SELECTION• Smaller versions of the LG16 power reticulation unit,portable and able to beused as auxiliary unitsLG7 rear viewCode 1 2+LG7 $1407.00ea $1320.00eaLG6.6P $479.95ea $443.95eaLG6.6PENQUIRE ABOUT LIFEGUARD MASTER SWITCHBOARDS ANDSAFETY LIGHTING FOR CONSTRUCTION SITES NOW!E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE31

HEAVY DUTY EXTENSION LEADS• Clear sockets• Safety skirt10 metreCode 1-9 10+R2810 $23.00 $19.0020 metre• Lead rating 15AMPCode 1-9 10+R2920NZ $45.00ea $39.90eaDURACELL BATTERIESSize 1-11 12-60 72-120 132+AAA $1.80ea $1.30ea $1.15ea $0.96eaAA $1.80ea $1.30ea $1.15ea $0.96eaC $3.40ea $3.10ea $2.75ea $2.35eaD $3.90ea $3.70ea $3.25ea $2.80ea9V $7.95ea $6.40ea $5.60ea $4.80eaPOWERLEADS / RCD / BATTERIESLIGHTING30 metre• Lead rating 15 AMPCode 1-9 10+R2930NZ $59.00ea $54.90ea35 METRE AVAILABLEExtra long 35m is maximumallowable lenght before voltagedrop occurs20 metre with clamping socketCode 1-9 10+R2820PBL $45.90ea $41.90eaSAFETY CORD LOCK• Stops leads comming apart• Fits all standard socketsCode 1-9 10+D107 $6.00ea $5.30ea6V HEAVY DUTY BATTERIESCode Size 1-19 20+17-6vBatt 6v $5.90ea $4.75eaEVERYREADY DOLPHIN 6 VOLT TORCH• Powered by 6 volt heavy-duty battery• Floating and water resistant• Shock resistant TYLEV body for rugged use• Large reflector head and Krypton globe projects longdistance beam• Ideal for tradesmen, boating or home useCode 1-5 6+17-Dolphin $32.60ea $28.50eaHEAVY DUTY POWER BOARDS• 5 outlet• Wide spacing for transformer plugs• 1.8 metre leadCode 1-5 6+D105PBOSS5 $19.90ea $17.70ea• 6 outlet• Surge protection• Power indication light• Wide spacing for transformer plugs• 3.1 metre leadCode 1-5 6+DP105PBOSSPA6 $35.50ea $30.90eaHALOGEN LAMPS• 500W Twin Halogen TowerCode 1-4 5+EHL75 $76.00ea $69.50eaRCD’S• 10 amp• 1.6 metre lead• Top plug styleCode 1-5 6+D5101 $44.00ea $38.50ea500W HALOGEN LAMPCode 1-4 5+EHL500S $24.95ea $21.95eaRCD SAFETY POWERBOARDS• 4 outletCode 1-5 6+D105ELP4 $106.90ea $93.40ea• 6 outletCode 1-5 6+D105ELP6 $122.90ea $107.40ea500W TUNGSTEN HALOGEN TUBECode 1-9 10+EHT5S $7.40ea $6.85eaNeed them to be “tagged?”We can do it - just ask32 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

TRAFFIC WANDS• Strong & lightweight• Puts out a ultra bright signal• For traffic control,parking guides,construction sites etc• 45cm long & used 2 x “D” batteriesCode 1-4 5+17-45TW $31.90ea $25.90eaHEAVY DUTY-MAGNETIC• 43% brighter because of new lens• Suitable for upto 100km/hr beacons• Supplied with spiral lead & cigarette plug design• Belt driven design for longer life12 voltCode 1-4 5+25-50MM12V $160.00ea $137.00ea24 voltCode 1-4 5+25-50MM24V $160.00ea $137.00eaHEAVY DUTY-BOLT-ON• 3 bolt fixing• Same specification as 25-50MMFLASHING HAZARD LAMPS• Dusk & daylight sensor• Dual switch for flashing or constant• Easily attachable to barriers and signage• Made to Australian standard AS1742• Uses 6 volt batteriesCode 1-4 5+17-FLHL $31.90ea $25.90ea12 voltCode 1-4 5+25-3BLB12V $99.00ea $85.80ea24voltCode 1-4 5+25-3BLB24V $99.00ea $85.80eaLIGHT BARS• Twin rotor• Supplied with lead and cigarette plugHAZARD LAMPSMETAL TYPE• Heavy gauge steel bodyCode 1-4 5+17-FLMTL $74.00ea $59.90eaROTATING BEACONS• Economy-Magnetic• Suitable for up to 80km/hr• Supplied with spiral lead & cigarettelighter plug• 12 volt onlyCode 1-4 5+25-ECOMB $78.00ea $63.00eaMagnetic Base - 12 voltCode 1-2 3+25-BBMAG12V $589.00ea $495.00eaMagnetic Base - 24 voltCode 1-2 3+25-BBMAG24V $599.00ea $510.00eaBolt-on Base - 12 voltCode 1-2 3+25-BBBON12V $399.00ea $340.00eaBolt-on Base - 24 voltCode 1-2 3+25-BBBON24V $390.00ea $332.00eaGLOBESFor flashing lightsCode 1-49 50-99 100+17-6VGL $1.80ea $1.57ea $1.20eaECONOMY-BOLT-ON• Bolt on version of the 25-ECOMB• 12 volt onlyCode 1-4 5+25-ECOBB $78.00ea $63.00eaFor beacons - 12 voltCode 1-9 10+25-1HGLB12V $12.50ea $10.50eaFor beacons - 24 voltCode 1-9 10+25-1HGLB24V $17.50ea $15.50eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE33

TUFF-NUT VENTED HARD HATS• 6 point harness• Air vents & cotton headband• Extended peak for added sun & rain protection• AS/NZS1801 standardCode Colour 1-10 11-19 20+HHV6B Blue $24.30ea $19.80ea $17.70eaHHV6G Green $24.30ea $19.80ea $17.70eaHHV6O Orange $24.30ea $19.80ea $17.70eaHHV6R Red $24.30ea $19.80ea $17.70eaHHV6W White $24.30ea $19.80ea $17.70eaHHV6Y Yellow $24.30ea $19.80ea $17.70eaHHV6FY Fluoro Yellow $24.30ea $19.80ea $17.70eaSAFETY GLASSES• Medium impact , anti-scratch lens• 99.9% U.V protection• Ultra light weight to increase comfort for extended wear• AS/NZS1337 standardPERSONAL SAFETYVispec clear• Deep design allows for prescription glasses to be wornCode 1-11 12+3000 $7.00ea $5.50eaBadgerCode lens 1-11 12+6700 clear $12.00ea $9.00ea6702 smoke $12.00ea $9.00eaStriker• Anti-fog lens ideal for use with dust masks• Comfortable silicon nose pieceCode lens 1-11 12+9000 clear $12.50ea $10.00ea9003 mirror $12.50ea $10.00eaJaws• One piece wrap around style• Supplied with cordCode lens 1-11 12+9200 clear $14.80ea $11.70ea9202 smoke $14.80ea $11.70eaScope clear googles• Anti-fog 2mm harded lens• Good chemical splash protection• Wide strap for comfortCode lens 1-11 12+3500 clear $32.40ea $25.90eaBrowguard & Visor• Anti-fog visor• Ready assemble to be nowCode lens 1-11 12+BGVC clear $46.50ea $37.90eaDISPOSABLE OVERALLS• Lightweight polypropylene with elastic waist,cuff & ankle• Easy to put on & remove • 2 way zip for when nature calls• Individually wrapped • 50 pcs per carton • Sizes:S,M,L,XL,2XL,3XLCode colour 1-49 50-99 100-199 200+DOB Blue $6.90ea $5.60ea $5.10ea $4.50eaDOW white $6.90ea $5.60ea $5.10ea $4.50eaDISPOSABLE OVERALLS- WATER REPELLANT• Lightweight & soft • Breathable to reduce moisture build-up• Water repellent • Excellant barrier to dust & broad range of chemicals• 2 way zip for when nature calls • Lint free • Individually wrapped• 50 pcs per carton • Sizes:S,M,L,XL,2XL,3XLCode colour 1-49 50-99 100-199 200+DOWP $17.70ea $14.70ea $11.25ea $10.80ea34 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

GLOVESMASONARY & CONCRETE• Latex dipped palm & fingers for grip• Elasticised for comfortable fit• Open knit poly/cotton for ventilation• Sizes 7,8,9,10 & 11Code 1-59prs 60-119prs 120+ prs342DG $8.10ea $7.31ea $6.50ea• Ultra tough latex palm & finger coating• One size fits allCode 1-59prs 60-119prs 120+ prs342LAT $4.10ea $3.80ea $3.30ea• Nitrile foam coated gives excellent dexterity• Nylon liner• Sizes 7,8,9 &10Code 1-59prs 60-119prs 120+ prsNNF $6.90ea $6.20ea $5.50eaRIGGING & ENGINEERING• Cow hide gloves• Suitable for most industries• Split leather palm• One size fits allCode 1-59prs 60-119prs 120+prs417PB $2.30 $2.10 $1.90• Heavy duty cow hide glove• One size fits allCode 1-59prs 60-119prs 120+prsR88FG $4.30 $3.90 $3.50PERSONAL SAFETY• Cow grain rigger glove• Sizes S,M,L & XLCode 1-59prs 60-119prs 120+prsCGL41N $9.80 $8.95 $7.95CONCRETE,OILS & GREASES• PVC Gloves• Hand & forearm protection available• One size fits allPVC Glove-short• 27cm long• Lined for easy on/offCode 1-59prs 60-119 prs 120+prsPVC27 $2.80ea $2.60ea $2.20eaPVC Glove-long• 45cm long• Lined for easy on/offCode 1-59prs 60-119 prs 120+prsPVC45 $4.75ea $4.20ea $3.80eaDUST MASKSAS/NZS1716 APPROVED• Nuisance dust • Box of 50 masksCode 1-3 4-9 10+PC101 $12.30ea $9.90ea $8.60ea• P1 Australian standard • Box of 20 masksCode 1-3 4-9 10+PC301 $34.50ea $28.40ea $24.85eaDISPOSABLE NITRILE GLOVES• Chemical, abrasive and oil resistant• Lightly powered,close fitting• Textured finger tips for better grip• 100 pc per box• Sizes S,M,L & XLCode 1-4 5-9 10+MDN28 $19.00ea $17.80ea $15.90ea• P2 Australian standard • Box of 12 masks• Exhalation valveCode 1-3 4-9 10+PC321 $37.90ea $31.00ea $26.70eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE35

DAY WORK SAFETY VEST• Fluorescent material• Velcro tabsCode 1-49 50-99 100+UVU2C $8.50ea $7.10ea $5.70eaDAY/NIGHT WORK SAFETY VEST• Hi-vis reflective strips suitable for night work• Velcro tabsCode 1-49 50-99 100+UVU8C $11.40ea $10.25ea $9.00eaPERSONAL SAFETYSAFETY GUMBOOTS• Steel toe• Oil & acid resistant• Reinforced ankle & shin protectionCode size 1-4 5+C-GBSA08 8 $38.50ea $32.40eaC-GBSA09 9 $38.50ea $32.40eaC-GBSA10 10 $38.50ea $32.40eaC-GBSA11 11 $38.50ea $32.40eaC-GBSA12 12 $38.50ea $32.40eaC-GBSA13 13 $38.50ea $32.40eaHEARING PROTECTION - EARMUFFS• Class 5, SLC80, 20dB• 28dB general purpose use• Hearing protection for noise levels to 110dB (A)Code 1-3 4+EMCOB $27.80ea $23.00ea• Class 5, SLC80, 26dB• General purpose use• Hearing protection for noise levels to 110dB (A)Code 1-3 4+EMVIP $23.00ea $19.30ea• Class 5, SLC80, 26dB• General purpose use• Hearing protection for noise levels to 110dB (A)Code 1-3 4+HHEM $23.95ea $20.00eaHEARING PROTECTION - EARPLUGS• Class 3, SLC80, 18dB• Hearing protection for noise levels to 100dB (A)• Comes in resealable plastic case• Reuseable silicone corded earplugsCode 1-49 50+EPSC $4.90ea $4.50ea• Headband earplugs - class 2 SLC80 14dB• Hearing protection for noise levels to 95dB (A)• Foam earpads are disposable and not designed for reuseCode 1-9 10+HPEB $7.95ea $7.40ea• Disposable corded earplugs - class 5 SLC80 27dB• Hearing protection for noise levels to 110dB (A)• Priced per 100Code 1-3 4+EPOC $65.00ea $59.00ea• Placement earplug pads to suit headband (HPEB)• Priced per 50 pairsCode 1-3 4+HPEBR $67.50ea $60.00ea• Reuseable silicone earplugs (same specs as EPSC)• Comes in resalable plastic caseCode 1-49 50+EPSU $4.30ea $3.95ea• Disposable uncorded plugs (same specs as EPOC)• Priced per 200 pairsCode 1-3 4+EPOU $65.00ea $59.00ea• Earplug dispenser station (same specs as EPOC)• 500 disposable uncorded earplugs• Dispenses one pair at a timeCode 1-3 4+EPDS500 $145.00ea $137.90ea• Refill bag for dispenser• 500 uncorded pairsCode 1-3 4+EPDS500R $97.50ea $79.95eaALL HEARINGPROTECTIONPRODUCTSAS/NZS 1270: 2002APPROVED36 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

TOILET TIDYCode 1-4 5+1029 $18.50ea $16.60eaChelsea White Sugar 3kgCode 1-5 6+9080 $12.10ea $11.50eaWASTE TIDYCode 1-4 5+56144 $8.25ea $7.40eaTOILET PAPER• 6 pack commercial paperCode 1-9 10+TPCOM6 $6.50ea $5.20ea• 12 pack economy paperCode 1-9 10+TPEC12 $10.70ea $8.50eaSWING TOP BINCode 1-4 5+1083w $29.90ea $26.50eaChelsea Raw Sugar 4kgCode 1-5 6+9084 $11.50ea $10.90eaBell Tea Bags 400sCode 1-4 5+9039 $19.98ea $18.90eaLipton Yellow Label Tea Bags 100sCode 1-4 5+9041 $8.50ea $8.05eaCANTEEN SUPPLIESINSTANT COFFEENescafe Expresso and Gold Blend offeran exciting taste option to vary your day.Choysa 500sCode 1-4 5+9045 $24.50ea $23.20eaNescafe Classic 500g granularCode 1-5 6+9001 $33.20ea $31.20eaNescafe Fine Blend 500g powderedCode 1-5 6+9002 $33.20ea $31.20eaDISPOSABLE CUPSHot cup 400ml x 20Code 1-9 10+HC400 $7.50ea $5.90eaHot cup 270ml x 50Code 1-9 10+HC270 $10.50ea $9.20eaMilo 1.9kgCode 1-5 6+9060 $31.50ea $29.90eaWOODEN STIRRERS9100 Wooden Stirrers - 1000Code 1-9 10+9100 $7.70ea $6.95eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE37

COLLATED SCREWS• High quality strip that suits most brands of screwgun• Endorsed by Makita• Carton quantity-1000pc• Priced per 1000Code Material Dia(mm) Length(mm) 1-4 5+630CO Gypsum 6 30 $19.40ea $17.35ea640CO Gypsum 6 40 $25.35ea $22.60ea6505F Flooring 8 50 $28.70ea $25.65ea• Collated tek screws for metal framing• Endorsed by Makita• Carton quantity-1000pc• Priced per 1000Code Dia(mm) Lenght(mm) 1-4 5+625GTEK 6mm 25mm $32.90 $28.30630GTEK 6mm 30mm $35.20 $30.20640GTEK 6mm 40mm $41.80 $ 35.90FASTNERS / FIXINGSCOLLATED NAILS• Suits all common brands of nail gun• Priced per cartonCode Dia(mm) Length(mm) Type Gas cylinder incl Ctn qty 1-4 5+GP390B 3.15 90 Bright Yes 3000 $129.40ea $115.40eaGP390G 3.15 90 Galv Yes 3000 $186.10ea $166.10eaGP2965 2.90 65 Galv Yes 5000 $180.20ea $160.90eaDR31590B 3.15 90 Bright No 3000 $83.20ea $74.25eaDR31590G 3.15 90 Galv No 3000 $110.90ea $99.00eaDR2965G 2.90 65 Galv No 5000 $127.55ea $113.90eaTHREADED ROD-GALVANISED• 1 metre lengthsCode Thread dia(mm) 1-19 10+TRM10G 10 $10.20ea $8.70eaTRM12G 12 $15.60ea $13.30eaTRM16G 16 $17.00ea $14.40eaCOACH BOLTS-GALVANISED• M12 thread• Priced per 100pcCode Length(mm) 1-5 6+CB12100G 100 $114.90ea $97.70eaCB12120G 120 $117.20ea $99.60eaCB12150G 150 $150.42ea $127.90eaCB12200G 200 $219.80ea $186.80eaENQUIRE ABOUT OUR FULL RANGEOF FASTENINGS & FIXINGS38 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

WALLBOARD GOLDWallboard Gold is a flexible, high strength, easy to use, gap-filling adhesive. Designed for adhering toa wide variety of wallboards and panels - including plasterboards, wallboards, plywood, acoustic tiles,architraves and mouldings.Available in 375ml cartridge or 600ml sausageCode size 1-19 20+022441 375ml $8.70ea $7.45ea022442 600ml $11.10ea $9.60eaTUF AS NAILS ORIGINALBonds all common building materials. Perfect for bonding steel, aluminium and other materials tohardboard, plasterboard, cement sheet, timber or concrete. Bonds immediately on contact. Adds rigidityand stiffness, eliminates movement. Available in 375ml cartridge or 600ml sausageCode size 1-19 20+022468 375ml $7.90ea $6.80ea022474 600ml $11.40ea $9.75eaSEAL-N-FLEX 1Single component, Class A polyurethane sealant for sealing joints in insitu concrete, precast and tilt uppanels, brick and blockwork, plasterboard, aluminum windows, granite, sandstone, marble, GRC, fibreglassand specialty panel systems, metal curtain walls and water tanks.Available in 375ml cartridge or 600mlsausageCode size colour 1-19 20+246220 375ml white $12.80ea $10.95ea246158 375ml grey $12.80ea $10.95ea246204 375ml black $12.80ea $10.95ea216267 600ml white $16.20ea $13.90ea216275 600ml grey $16.20ea $13.90ea217808 600ml black $16.20ea $13.90eaACOUSTIC SEALANTAcoustic sealant is a water based, high solids, permanently flexible and dense sealant designed foracoustic isolation.Available in 600ml sausageCode size colour 1-19 20+063594 600ml white $8.25ea $7.10eaADHESIVES & SEALANTSFIRECAULKAcrylic fire and acoustic rated, single component, non sag, gunnable sealant. Cures to form a soft draughtprooffire rated seal (up to 4 hours fire rating) and is paintable. Available in 600ml sausage.Code size 1-19 20+239755 600ml $11.20ea $9.60eaGLAZING SILICONEOne component industrial grade acetone (acetic) cure silicone for sealing and waterproofing all types ofwindows and frames. A glass and glazing silicone.Code size 1-19 20+241598 300ml $8.50ea $7.45eaKITCHEN & BATHROOM SILICONEProvides a permanently flexible waterproof seal. Designed for sealing of joints in wet and damp areas whereresistance to the growth of fungus and mould is important. Bonds to ceramics, glass, steel, aluminium, andmost plastic and painted surfacesCode size 1-19 20+241563 300ml $8.50ea $7.45eaROOF & GUTTER SILICONEGeneral purpose, permanently flexible clear sealant. Suitable for interior/exterior applications. Designedto provide a seal for guttering, aluminium roofing, flashing, down pipes, skylights, plumbing applicationsand vents.Code size 1-19 20+241008 300ml $8.50ea $7.45eaSEE PAGE 40 FORSEALANT GUNSFILL-A-GAPA general purpose, gunnable one-part water based, paintable acrylic gap filler. This easy to use, economicalsealant provides excellent adhesion for gaps and low movement joints.Code size 1-19 20+063960 300ml $4.15ea $3.60eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE39

SIMSON ISR 70-01Simson ISR 70-01 is a multi-purpose, permanent elastic sealant with very good ageing properties basedon Silyl Modified Polymer. Suitable for applications where within the product strong movements can occur,yet a seal is still required. Available in 290ml cartridge or 600ml sausageCode size colour 1-9 10+133201 290ml white $13.90ea $11.90ea136221 290ml black $13.90ea $11.90ea136192 290ml grey $13.90ea $11.90ea133202 600ml white $18.60ea $16.00ea136222 600ml black $18.60ea $16.00ea136193 600ml grey $18.60ea $16.00eaCLEARSEALA clear, high performance co-polymer sealant designed for sealing and adhering a wide range of domesticand commercial applications. Clear Seal exhibits exceptional, flexible and durable properties and isformulated to exhibit non-sag characteristicsCode size 1-9 10+260088 300ml $13.25ea $11.40eaADHESIVES & SEALANTSEXPANDA FOAMAn easy to dispense and install through the straw adapter included with each can and will expand to fillgaps of all dimensions in the most difficult locations. It will greatly reduce noise, dust and draughts andwill block access by rodents.Code size 1-11 12+267414 340g $11.50ea $9.85ea1222 CONTACT ADHESIVEA general purpose contact adhesive formulated to give high bond strength and high heat resistance. It isrecommended for the bonding of plastic laminates, roofing butyl membrane, carpet, cotton backed sheetvinyls and stair nosings.Code size 1-9 10+BTKCA1 1 ltr $19.90ea $17.00eaBTKCA4 4 ltr $61.20ea $52.20eaSOLVENT NO2Aromatic solvent for clean-up & dilution of Neoprene adhesive. Can also be sused for surface cleaningprior to bonding on surfaces which will not be attacked by the solvent.Code size 1-4 5+BTKS2 4 ltr $43.80ea $37.60eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICESUPERTAK HIGH PERFORMANCEA fast tack, fast grab, low soak-inspray adhesive especially formulated to bond polyethylene to itself,concrete block, wood and many hard-to-bond surfaces.Code size 1-11 12+150724 480g $26.20ea $22.40eaHANDI CLEAN TOWELSQuickly and efficiently removes adhesives, sealants, tar, wax, grease, oil, lubricants, paints, inks, dirt andother hard to remove substances from tools and equipment.Code contents 1-5 6+257753 75 towels $44.40ea $38.00eaDUAL PURPOSE GUN• Dual Purpose barrel gun for easy application of both sausage and cartridge productsCode 1-5 6+851370 $39.50ea $35.00eaCAULKING GUN• Steel FrameCode 1-4 5+A-040109 $11.40ea $9.10eaTUBULAR SEALANT GUN• Suit 600ml cartridge• Tube length - 380mlCode 1-4 5+A-040215 $61.00ea $48.50eaAIR CAULKING GUN• Controlable flow• Sensitive control stops sealant dripping• lightweightCode 1-4 5+ACG-01 $59.00ea $47.20ea40 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

SIGNET SPOT MARKING PAINT• Reliability• Guaranteed quality• Trigger cap• 350 gram can• 12 cans per cartonCode Colour 1-11 12+7420 Black $9.90ea $8.90ea7421 Red $9.90ea $8.90ea7422 Blue $9.90ea $8.90ea7423 Green $9.90ea $8.90ea7424 Yellow $9.90ea $8.90ea7425 White $9.90ea $8.90ea7426 Orange $9.90ea $8.90ea7434 Purple $9.90ea $8.90ea7427 Red-fluoro $9.90ea $8.90ea7428 Blue-fluoro $9.90ea $8.90ea7429 Orange-fluoro $9.90ea $8.90ea7430 Pink-fluoro $9.90ea $8.90ea7431 Green-fluoro $9.90ea $8.90ea7432 Yellow-fluoro $9.90ea $8.90ea7433 Purple-fluoro $9.90ea $8.90eaFLUORESCENT MARKING SPRAY• For vertical free hand use• Brightens to a strong colour within minutes• 350 gram can• 12 cans per cartonCode Colour 1-11 12+7180 Red $9.90ea $8.90ea7181 Blue $9.90ea $8.90ea7182 Green $9.90ea $8.90ea7183 Yellow $9.90ea $8.90ea7184 Orange $9.90ea $8.90ea7185 Pink $9.90ea $8.90eaMARKINGCARPENTERS - PENCIL - HASON• Green- 20 per packet (Hard)Code 1-5 6+HA-10378 $36.20ea $28.95ea• Red- 20 per packet (Medium)Code 1-5 6+HA-10380 $36.20ea $28.95eaCARPENTERS PENCIL SHARPNERCode 1-5 6+HA-00104 $7.40ea $5.90eaPERMANENT MARKER• 12 pce packet• Price per penCode Colour 1-5 6+7040 Black $8.90ea $7.90ea7041 Red $8.90ea $7.90ea7042 Blue $8.90ea $7.90eaLUMBER CRAYONS• 12 pce packetCode Colour 1-5 6+L-310BA Black $12.00ea $10.50eaL-310R Red $12.00ea $10.50eaL-310W White $12.00ea $10.50eaL-310Y Yellow $12.00ea $10.50eaL-310BU Blue $12.00ea $10.50eaL-310G Green $12.00ea $10.50eaBLOCK CHALK• 24 blocks per boxCode Colour 1-5 6+7580 White $22.00ea $19.80eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE41

PAINT BRUSHESTitan RangeCode Width(mm) 1-19 20+TI25 25 $4.70ea $3.80eaTI38 38 $5.80ea $4.60eaTI50 50 $7.20ea $5.75eaTI75 75 $11.00ea $8.80eaMedium DutyCode Width(mm) 1-19 20+REB25 25 $6.70ea $5.40eaREB38 38 $8.00ea $6.40eaREB50 50 $10.80ea $8.70eaREB75 75 $16.80ea $13.40eaREB100 100 $21.00ea $16.70eaPAINT ACCESSORIESPaint Roller Sleeve• Ideal for applying waterproofers,sealers etcCode Width(mm) Pack qty 1-11 12+180MOHAIR 180 1 $4.00ea $3.20ea230MOHAIR 230 1 $4.30ea $3.40ea270MOHAIR 270 1 $6.20ea $4.90ea230MOHAIR3P 230 3 $11.00ea $8.80ea270MOHAIR3P 270 3 $12.00ea $9.60eaPAINT ROLLER KIT• Includes sleeve-semi rough,handle and 230mm trayCode 1-4 5+230GSEK $20.50ea $16.50eaDROP COVERSCode Size Material Duty 1-12 13-23 24+PADCDL 2.7 x 3.6m Calico Heavy $66.50 $53.20 $46.00PADCHDP 2.6 x 3.6m Plastic Heavy $10.30 $8.20 $7.50PADCP 2.6 x 3.6m Plastic Medium $4.80 $4.30 $3.90PADCLWP 2.6 x 3.6m Plastic Light $3.60 $3.20 $2.80RAGS• Washed mutton cloth• Price per kgCode 1-5 6+NTMCI $13.20ea $11.20eaSEE PAGE 28 FOR MORE RAGSSTOCKINETTE• 10 metre rollCode 1-5 6+2030 $16.20ea $14.20ea42 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

FIRST AID KITSMIE Soft Pack• Personal or vehicle useCode 1-3 4+PM 400 $29.00ea $26.00eaMIP Soft Pack• Up to 5 personnel• General or vehicle useCode 1-3 4+PM410 $39.00ea $35.00eaMIP RefillCode 1-3 4+PM45 $29.00ea $26.00eaM10 Soft Pack• Up to 10 personnel• Factory or site officeCode 1-3 4+PM 420 $60.00ea $55.00eaMI0 Wall mountedCode 1-3 4+PM422 $99.00ea $90.00eaMI0 RefillCode 1-3 4+PM425 $40.00ea $35.00eaFIRST AIDM30 Soft Pack• Up to 30 personnel• Factory or commercial useCode 1-3 4+PM 430 $85.00ea $75.00eaM30 RefillCode 1-3 4+PM435 $55.00ea $50.00eaM30 Wall mount• Up to 30 personnel• Factory or commercial useCode 1-3 4+PM 432$120.00ea $110.00eaSun Protection• SPF 30+• With vitamin E• Non greasy formula• 125ml tubeCode 1-11 12+SS125 $12.50ea $10.30eaUrine Drug Test• 5 panel test for commonly used drugs - complete withadulteration stripCode 1-3 4+DAT 210 $32.00ea $27.00eaSaliva Drug Test• 6 panel test for commonly used drugsCode 1-3 4+DAT 300 $35.00ea $29.00ea• 500ml pump bottleCode 1-5 6+SS500 $19.90ea $16.70ea• 1 litre pump bottleCode 1-5 6+SS1 $42.00ea $35.50eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE43

• 2 spring loaded poles• Extend from 2 metres to 6.4 metresCode 1-2 3-4 5+KIT 20 $ 390.00ea $370.00ea $360.00eaZIP WALL DUST BARRIER• 1x spring loaded pole (SLP1)• 6 spring loaded poles (SLP6)• Extend from 1.4 metres to 3.7 metresCode 1-2 3-4 5+SLP1 $ 110.00ea $104.50ea $101.75eaSLP6 $590.00ea $560.00ea $545.00ea• 2 x side clamps• Creates super tight seal on wall when use withFoam RailCode 1-2 3-4 5+SC2 $ 59.00ea $56.00ea $54.50ea• 2 x adhesive zippers• For quick and easy access in and out of dust barrierCode 1-2 3-4 5+AZ2 $ 29.00ea $27.70ea $26.00ea• 2 x foam rails and T -Clips• Holds plastic sheeting in placeCode 1-2 3-4 5+FR2 $ 99.00ea $94.00ea $91.50ea• 6 x side foam rails• Holds plastic sheeting in place against wall• Includes 6 x side clamps• Includes carry bagCode 1-2 3-4 5+SDPK$ 325.00ea $308.00ea $301.50eaHEAVY DUTY CANVAS BAG• To carry all ZIPWALL accessoriesCode 1-2 3-4 5+CB1 $75.00ea $71.00ea $69.50ea44POLYTHENE FILM• Clear or black• 3m x 100m x 80 micronCode Colour 1-2 3-4 5+310080C Clear $225.00ea $208.00ea $202.00ea310080B Black $236.00ea $218.00ea $212.00ea• 4m x 50m x 80 micron• Clear onlyCode 1-2 3-4 5+45080C $169.00ea $156.00ea $152.00ea44 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

CA HIGH-PERFORMANCE RANGE• Cable crimped wire• 50% longer lasting brushCode Thread Dia 1-5 6+TCA 1250 M14 125mm $32.00ea $28.50eaCRIMPED WIRE CUP BRUSHESCode Thread Dia 1-5 6+TO 0600R77 M10thd 60mm $14.95ea $13.50eaHSC 0075E M14thd 75mm $17.90ea $16.20eaTO 1000E M14thd 100mm $19.85ea $17.80eaTO 1250E M14thd 125mm $24.90ea $22.40eaStainless SteelTO 1250Z M14thd 125mm $55.00ea $49.50eaTWIST KNOT CUP BRUSHESCode Thread Dia 1-5 6+HST 0065K M10thd 65mm $16.45ea $14.50eaTT 125 M14thd 125mm $36.00ea $32.40eaWIRE BRUSHESHIGH SPEED WHEEL BRUSHES - SAUCER SHAPEDCode Thread Dia 1-5 6+HSD 100E M14thd 100mm $18.45ea $16.60eaCT-MULTI BORED WHEEL BRUSHESCode Width Dia 1-5 6+CT 1505E 19mm 150mm $18.00ea $16.20eaCT 2005E 19mm 200mm $20.95ea $18.80eaHAND BRUSHES• Plastic handle• Brass coated steel bristles• 24 per cartonCode 1-5 6+VIP1000F $3.90ea $3.40eaHAND BRUSHES• Wooden handle• Curved back• Four row• 10 per cartonCode Bristle 1-5 6+MS4000T steel $3.90ea $3.40eaMS4000X brass $4.45ea $4.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE45

METAL GRINDING DISCSCode Bore Dia Ctn 1-99 100+GA3010 16 100mm 100 $3.92ea $3.10eaGA3101 22 115mm 100 $3.98ea $3.20eaGA3102 22 125mm 100 $4.30ea $3.44eaGA3104 22 178mm 25 $7.60ea $6.08eaGA3105 22 230mm 25 $10.24ea $8.19eaMETAL CUT-OFF DISCSSANDING & GRINDINGCode Bore Dia Ctn 1-99 100+GA5010 16 100mm 100 $3.10ea $2.48eaGA5011 22 115mm 100 $3.20ea $2.56eaGA5012 22 125mm 100 $3.65ea $2.92eaGA5014 22 178mm 50 $5.52ea $4.41eaGA5015 22 230mm 50 $6.50ea $5.20eaGA5018 25.4 305mm 25 $16.42ea $13.13eaGA5111 25.4 355mm 25 $18.40ea $14.72eaGA5025 25.4 405mm 25 $39.58ea $31.66eaHIGH SPEED CUT-OFF DISCS- FOR PETROL POWERED SAWSMetalCode Bore Dia Ctn 1-99 100+GA5400 20 305mm 25 $12.89ea $10.30eaGA5402 25.4 305mm 25 $12.89ea $10.30eaGA5410 20 355mm 25 $18.52ea $14.85eaGA5412 25.4 355mm 25 $18.52ea $14.85eaMasonaryCode Bore Dia Ctn 1-99 100+GA6010 20 305mm 25 $13.20ea $10.60eaGA6011 22 305mm 25 $13.20ea $10.60eaGA6012 25.4 305mm 25 $13.20ea $10.60eaGA6110 20 355mm 25 $17.97ea $14.40eaGA6112 25.4 355mm 25 $17.97ea $14.40eaGA6220 25.4 400mm 25 $43.65ea $34.90ea46 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

RESIN FIBRE DISCS100mm dia - 16m bore• 100 pc per packCode Grit 1 pack 2+WD3301 16 $101.00ea $85.85eaWD3303 36 $82.00ea $69.70eaWD3306 60 $66.00ea $56.10eaWD3308 80 $62.00ea $52.70eaWD3312 120 $62.00ea $52.70ea115mm dia - 22mm bore• 100 pc per packCode Grit 1 pack 2+WD3401 16 $112.00ea $95.20eaWD3403 36 $99.30ea $84.40eaWD3406 60 $86.10ea $73.20eaWD3408 80 $82.00ea $69.70eaWD3412 120 $82.00ea $69.70eaSANDING & GRINDING125mm dia - 22mm bore• 100 pc per packCode Grit 1 pack 2+WD3501 16 $112.50ea $95.60eaWD3503 36 $101.00ea $85.80eaWD3506 60 $94.00ea $79.90eaWD3508 80 $87.15ea $74.00eaWD3512 120 $87.15ea $74.00ea178mm dia - 22mm bore• 100 pc per packCode Grit 1 pack 2+WD3701 16 $210.00ea $178.50eaWD3703 36 $166.00ea $141.10eaWD3706 60 $145.00ea $123.25eaWD3708 80 $139.00ea $118.15eaWD3712 120 $137.00ea $116.45eaSelf Adhesive Discs -150mm dia• 100 pc per packCode Grit 1 pack 2+CD2504 40 $126.00ea $107.10eaCD2506 60 $118.00ea $100.30eaCD2508 80 $84.00ea $71.40eaCD2512 120 $74.00ea $62.90eaCD2518 180 $66.00ea $56.10eaCD2524 240 $63.00ea $53.50eaCD2532 320 $63.00ea $53.50eaVelcro Discs - 150mm dia• 100 pc per packCode Grit 1 pack 2+CD2204 40 $138.00ea $117.30eaCD2206 60 $126.00ea $107.10eaCD2208 80 $99.45ea $84.50eaCD2212 120 $89.50ea $76.00eaCD2218 180 $87.65ea $74.75eaCD2224 240 $83.00ea $70.50eaCD2232 320 $83.00ea $70.50eaEezer Pad -• 150mm dia to suit self adhesive discs• To suit orbital sanders with 5/16 threadCode 1 -3 4+6636 $39.00ea $35.10ea• 150mm dia to suit velcro discs• To suit orbital sanders with 5/16 threadCode 1-3 4+6636K $54.00ea $49.60ea48 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

FLAP DISCS-LONG LIFE FIBRE DISCSCode Grit Dia 1-9 10+WD5404 40 115mm $6.80ea $6.00eaWD5406 60 115mm $6.80ea $6.00eaWD5408 80 115mm $6.80ea $6.00eaWD5412 120 115mm $6.80ea $6.00eaWD5504 40 125mm $7.90ea $7.00eaWD5506 60 125mm $7.90ea $7.00eaWD5508 80 125mm $7.90ea $7.00eaWD5512 120 125mm $7.90ea $7.00eaGA2020 40 178mm $27.00ea $24.30eaGA2021 60 178mm $27.00ea $24.30eaGA2052 80 178mm $27.00ea $24.30eaSURFACE CLEANING DISCS• Ideal for cleaning metal & timber prior to painting, cleaningup welds leaving a smoother finish than a wire brush.• Depressed centre for angle grinder useCode Bore Dia 1-9 10+BC1041 22 115mm $13.50ea $12.00eaBC1042 22 125mm $14.20ea $12.78eaBC1043 22 178mm $22.70ea $20.45eaSANDING & GRINDINGENGINEERS ROLLS• 38mm wide• 50 metre lengthCode Grit 1-2 3+CB5004 40 $57.25ea $52.00eaCB5006 60 $53.00ea $48.00eaCB5008 80 $50.00ea $45.00eaCB5012 120 $50.00ea $45.00eaCB5015 150 $50.00ea $45.00eaSANDING ROLLS• 115mm wide• 50 metre lengthCode Grit 1-2 3+CB6104 40 $115.00ea $103.50eaCB6106 60 $96.00ea $86.40eaCB6108 80 $90.00ea $81.00eaCB6112 120 $86.00ea $77.40eaCB6115 150 $86.00ea $77.40eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE49

HAND SANDER• 280 x 110mm• Strong clamps & baseCode 1-5 6+SPH05 $22.30ea $17.20eaHAND SANDER WITH VACUUM ATTACHMENT• 1.8mt hose,adaptors & swivel joint• Finger tip valve for suction controlCode 1-5 6+SHVS65-KIT $71.50ea $54.00eaSANDING & GRINDINGSANDING SHEETS• For SPH05• 20 piece packCode Grit 1-5 6+5P15S-20 150 $10.65ea $8.50ea5P18S-20 180 $10.65ea $8.50ea5P22S-20 220 $10.65ea $8.50eaSANDING MESH SHEETS• For SHV65-KIT• Open mesh for longer life & less dust• 20 piece pack/150 gritCode 1-5 6+5M15S-20 $23.78ea $19.00eaSANDING FOAMS• Dual grit-wet/dry• 98 x 69 x 26mm• 48 per cartonCode 1-47 48+SFM04 $2.90ea $1.99ea• Same as SFM04 but with angled sides• 60 per cartonCode 1-59 60+SFM05 $3.30ea $2.20ea• Large angle side block• 127 x 75 x 26mm• 60 per cartonCode 1-59 60+SFM59 $3.30ea $2.20ea:50 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

BRICK TROWEL - LONDON• Durasoft Handle• 146 x 305mmCode 1-2 3-5 6+3412FG $86.10ea $76.56ea $66.90eaBRICK TROWEL - PHILADELPHIA• Durasoft Handle• 152 x 305mmCode 1-2 3-5 6+1912FG $74.65ea $66.40ea 58.00eaGROOVER ZINC• Durasoft Handle• 152 x 111mm, 6mm radius, 13mm depthCode 1-2 3-5 6+M833D $54.30ea $49.50ea 42.20ea• 152 x 111mm, 6mm radius, 19mm depthCode 1-2 3-5 6+M834D $59.70ea $53.00ea $46.40ea• 152 x 111mm, 6mm radius, 25mm depthCode 1-2 3-5 6+M835D $66.70ea $59.30ea $57.90eaBRICK JOINTER• 13 and 16mmCode 1-2 3-5 6+M80 $12.50ea $10.90ea $9.50ea• 16 and 19mmCode 1-2 3-5M82 $12.50ea $10.90ea $9.50eaGAUGING TROWEL• Durasoft Handle• 86 x 178mmCode 1-2 3-5 6+48D $52.60ea $43.95ea $40.95eaMORTER HOE• D Grip• 178 x 457mmCode 1-2 3-5 6+14281 $65.49ea $61.00ea $57.00eaCONCRETE RAKE / SPREADER• 508 x 102mm• Includes handleCode 1-2 3-5 6+827 $30.60ea $26.20ea $23.60eaEDGER - STRAIGHT ENDS• Durasoft Handle• Stainless Steel• 152 x 102mm, 6mm radius, 10mm depthCode 1-2 3-5 6+164SSD $24.30ea $21.60ea $18.90ea• 152 x 102mm, 10mm radius, 13mm depthCode 1-2 3-5 6+165SSD $24.30ea $21.60ea $18.90ea• 152 x 102mm, 13mm radius, 16mm depthCode 1-2 3-5 6+166SSD $24.30ea $21.60ea $18.90eaMAGNESIUM FLOAT - “THE HOG”• Durasoft Handle• 406 x 95mmCode 1-2 3-5 6+M738D $57.90ea $51.30ea $47.90ea• 508 x 95mmCode 1-2 3-5 6+M740D $67.40ea $59.90ea $52.40eaMAGNESIUM FLOAT• Durasoft Handle• 406 x 79mmCode 1-2 3-5 6+M145D $56.20ea $49.90ea $43.70ea• 508 x 79mmCode 1-2 3-5 6+M146D $66.15ea $58.80ea $51.45eaCONCRETE & PLASTERING TOOLSCONCRETE RAKE / SPREADER• 508 x 102mm• Includes handleCode 1-2 3-5 6+826 $31.50ea $27.80ea $24.30eaCONCRETE RAKE / SPREADER• 495 x 102mmCode 1-2 3-5 6+AP753 $61.50ea $55.00ea $47.80eaMARSHALLTOWN STILTS• 3 way rachet setting system to fit any size leg• Durable quick adjust and release straps• Flip and switch system allows for quick heightadjustment• Fully adjustable ankle spring allows for a morenatural walking motionCode 1-2 3-5 6+SW218 $699.00ea $665.00ea $610.00eaLARGE RANGE OFMARSHALLTOWN PRODUCTS AVAILABLE- PLEASE ENQUIREE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE51

POOL TROWEL - GOLDEN S/STEEL• Durasoft Handle• 254 x 76mmCode 1-2 3-5 6+SP12GSD $85.00ea $75.30ea $65.80ea• 356 x 102mmCode 1-2 3-5 6+SP14GSD $90.50ea $81.00ea 71.00ea• 406 x 114mmCode 1-2 3-5 6+SP16GSD $99.00ea $89.00ea $77.90eaPOINTED FINISHING TROWEL• Durasoft Handle• 356 x 102mmCode 1-2 3-5 6+PT101A $29.90ea $27.00ea $24.00• 400 x 115mmCode 1-2 3-5 6+PT191A $32.90ea $30.00ea $27.00ea• 451 x 115mmCode 1-2 3-5 6+PT192A $37.90ea $35.00ea $32.00ea• 660 x 120mmCONCRETE & PLASTERING TOOLSFINISHING TROWEL• Durasoft Handle• Fully rounded• 500 x 125mmCode 1-2 3-5 6+MX205FD $101.00ea $94.00ea $89.00ea• 610 x 102mmCode 1-2 3-5 6+MXS244FD $126.30ea $112.60ea $98.20ea• 610 x 127mmCode 1-2 3-5 6+MXS245FD $127.60ea $113.50ea $99.30eaFRESNO TROWEL• 610 x 127mmCode 1-2 3+FR24R $68.00ea $59.00eaFINISHING TROWEL• Durasoft Handle• Stainless Steel• 280 x 121mmCode 1-2 3-5 6+MXS3SSD $85.00ea $75.60ea $66.20ea• 356 x 121mmCode 1-2 3-5MXS73SSD $96.30ea $85.60ea $74.90eaALUMINIUM HAWK• Durasoft Handle• 330 x 330mmCode 1-2 3-5 6+M1D $48.80ea $43.30ea $37.90eaLONG TIMBER HANDLE• 1829 x 37mmCode 1-2 3+M10 $74.50ea $59.90eaYELLOW SPONGE FLOAT• 280 x 140mmCode 1-2 3-5 6+M4412 $26.50ea $23.58ea $20.63eaBULL FLOAT HANDLE• 1829 x 44mmCode 1-2 3+B572 $55.40ea $49.20eaMAGNESIUM BULL FLOAT• 1219 x 203mmCode 1-2 3-5 6+MB48 $303.00ea $270.00ea $235.00eaFLUTED RUB BRICK• 203 x 89 x 38mm• 20 GritCode 1-2 3-5 6+M841 $37.30ea $33.00ea $29.00ea52 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

ECONOMY GOLD RANGE• Super thin - 1.2mm for vitrified tiles,porcelain and ceramic tilesCode Dia(mm) Cut type Bore Pack Qty 1-9 10+DYB-04TTP 105 wet/dry 20/16 10 $28.50ea $22.80ea5 STAR PREMIUM RED RANGE• Fully vitrified tiles, porcelain and ceramic tilesCode Dia(mm) Cut type Bore Pack Qty 1-9 10+DRB-04TTP 105 wet/dry 20/16 10 $60.80ea $48.60eaDIAMOND TOOLS - CUTTINGECONOMY GOLD RANGE• For site work and general purpose useCode Dia(mm) Cut type Bore Pack Qty 1-9 10+DYB-4TGP 105 wet/dry 20/16 10 $19.00ea $15.20eaDYB-45TGP 115 wet/dry 22/20 10 $28.50ea $22.80eaDYB-05TGP 125 wet/dry 22/20 10 $38.00ea $30.40eaDYB-07TGP 180 wet/dry 25.4/22 1 $68.40ea $54.70eaC-DBTG09 230 wet/dry 25.4/22 1 $95.00ea $76.00eaMPS SUPERIOR PREMIUM TURBO BLADE A++ BLADE• For multi-purpose site work• Guaranteed to cut all construction materials including steelCode Dia(mm) Cut type Bore Pack Qty 1-9 10+DRB-04MPS 105 wet/dry 16 10 $53.20ea $42.50eaDRB-45MPS 115 wet/dry 22/20 10 $57.00ea $45.50eaDRB-05MPS 125 wet/dry 22/20 10 $72.20ea $57.80eaDRB-07MPS 180 wet/dry 22/20 1 $95.00ea $76.00eaDRB-09MPS 230 wet/dry 30/25.4 1 $142.50ea $114.00eaDRB-10MPS 250 wet/dry 30/25.4 1 $165.30ea $132.20eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE53

ECONOMY GOLD RANGE• Combination blade• For 50/50 clay/concrete,clay bricks & paversCode Dia(mm) Cut type Bore 1 2+DYB-1412SCB 350 wet 25.4/20 $231.50ea $185.50eaDYB-1612SCB 400 wet 25.4/20 $304.00ea $243.20ea5 STAR PREMIUM RED RANGEDIAMOND TOOLS - CUTTINGCode Dia(mm) Cut type Bore 1 2+DRB-1210LCB 300 wet 25.4/20 $399.00ea $319.20eaDRB-1410LCB 350 wet 25.4/20 $418.00ea $335.00eaDRB-1610LCB 400 wet 25.4/20 $456.00ea $364.90eaECOMONY GOLD RANGE• Concrete pavers, Besser blocksCode Dia(mm) Cut type Bore 1 2+DYB-1412SCP 350 wet 25.4/20 $231.80ea $185.50ea5 STAR PREMIUM RED RANGECode Dia(mm) Cut type Bore 1 2+DRB-1410LCP 350 wet 25.4/20 $418.40ea $335.60MPS SUPERIOR SUPERFAST SEGMENT TURBO BLADE• A++ Blade• For multi-purpose use• Guaranteed to cut all construction materials including steelCode Dia(mm) Cut type Bore 1 2+DRB-12MPS 300 wet 25.4/20 $399.00ea $319.20eaDRB-14MPS 350 wet 25.4/20 $418.00ea $335.00ea54 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

ECONOMY GOLD RANGE• Continuos Rim Blades• For ceramic tiles, slate & terracottaCode Dia(mm) Cut type Bore Pack Qty 1-9 10+DYB-04CRT 105 wet/dry 20/16 10 $14.25ea $11.40eaDYB-45CRT 115 wet/dry 22/20 10 $21.85ea $17.50eaDYB-05CRT 125 wet/dry 22/20 10 $25.65ea $20.50eaDYB-07CRT 180 wet 25.4/22 1 $60.80ea $48.60eaDYB-08CRT 200 wet 25.4/20 1 $72.20ea $57.70eaDYB-09CRT 230 wet 25.4/20 1 $98.80ea $79.00ea5 STAR PREMIUM RED RANGE• Continuos Rim Blades• For ceramic tiles, slate & terracottaCode Dia(mm) Cut type Bore Pack Qty 1-9 10+DRB-4R10P 105 wet/dry 20/16 10 $34.20ea $27.40eaDRB-45R10P 115 wet/dry 22/20 10 $38.00ea $30.50eaDRB-5R10P 125 wet/dry 22/20 10 $41.80ea $33.50eaDRB-7R10P 180 wet 25.4/22 1 $76.00ea $60.80eaDRB-10R10P 250 wet 30/25.4 1 $133.00ea $106.50eaDIAMOND TOOL - CUTTINGECONOMY GOLD RANGE• Segmented Rim Blades• General purpose,site workCode Dia(mm) Cut type Bore Pack Qty 1-9 10+DYB-04SGP 105 wet/dry 20/16 10 $19.00ea $15.20eaDYB-45SGP 115 wet/dry 22/20 10 $28.50ea $22.80eaDYB-05SGP 125 wet/dry 22/20 10 $38.00ea $30.40eaDYB-07SGP 180 wet/dry 25.4/22 1 $68.40ea $54.70eaDYB-09SGP 230 wet/dry 25.4/22 1 $95.00ea $76.00ea5 STAR PREMIUM RED RANGE• Segmented Rim Blades• General purpose,site workCode Dia(mm) Cut type Bore Pack Qty 1-9 10+DRB-04SGP 105 wet 20/16 10 $45.60ea $36.50eaDRB-45SGP 115 wet 22/20 10 $53.20ea $42.50eaDRB-05SGP 125 wet 22/20 10 $66.50ea $53.20eaDRB-07SGP 180 wet 25.4/22 1 $85.50ea $68.40eaDRB-09SGP 230 wet 25.4/22 1 $133.00ea $106.50eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE55

ECONOMY GOLD BLADE• For cured,reinforced concreteCode Dia(mm) Cut type Bore 1 2+DYB-1412SCO 350 wet 25.4/20 $231.00ea $185.00eaDYB-1612SCO 400 wet 25.4/20 $304.00ea $203.20ea5 STAR PREMIUM RED BLADE• For cured,reinforced concreteDIAMOND TOOLS - CUTTINGCode Dia(mm) Cut type Bore 1 2+DRB-1210LCO 300 wet 25.4/20 $399.00ea $319.20eaDRB-1410LCO 350 wet 25.4/20 $418.00ea $335.00eaDRB-1610LCO 400 wet 25.4/20 $456.00ea $364.90eaECONOMY GOLD BLADE• For asphalt,green concrete,limestone/sandstoneCode Dia(mm) Cut type Bore 1 2+DYB-1412SAS 350 wet 25.4/20 $231.00ea $185.50eaDYB-1612SAS 400 wet 25.4/20 $304.00ea $243.20ea5 STAR PREMIUM RED BLADE-LASER WELDED• For asphalt,green concrete,limestone/sandstoneCode Dia(mm) Cut type Bore 1 2+DRB-1210LAS 300 wet 25.4/20 $349.00ea $319.50eaDRB-1410LAS 350 wet 25.4/20 $413.00ea $339.50eaDRB-1610LAS 400 wet 25.4/20 $456.00ea $364.90ea56 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

Single Row Cup• Aggresive action for concrete removal• Fast action,short life,coarse finishCode Dia(mm) Bore(mm) 1-4 5+125SRC 125 22 $198.00ea $168.00ea178SRC 180 22 $220.00ea $187.00eaDouble Row Cup• General concrete grinding & levellingCode Dia(mm) Bore(mm) 1-4 5+125DRC 125 22 $220.00ea $187.00ea180DRC 180 22 $310.00ea $260.00eaTurbo Rim Cup• Long life-smooth finish• Suitable for edge bevelling• Fine finishCode Dia(mm) Bore(mm) 1-4 5+125TRC 125 22 $198.00ea $168.00ea180TRC 180 22 $299.00ea $250.00eaDIAMOND TOOLS - GRINDINGRadial Segment Cup• 10 segment-ideal for aggregate exposure & smoothingCode Dia(mm) Bore(mm) 1-4 5+180RSC 180 22 $239.00ea $199.00eaMonster Wheel• Heavy duty concrete grinding• Ideal for paint & adhesive residue removal• Coarse diamond for fast removal rate• Monster segment size of 40 x 10 x 10Code Dia(mm) Bore(mm) 1-4 5+180MW 180 22 $239.00ea $199.00eaCrack Chaser Blade• Used for grinding out cracks in floors or walls• Can be used for achitectural cuts in patterned or coloured concrete• Segment size 10mm x 10mmCode Dia(mm) Bore(mm) 1-4 5+100CCB 100 22 $273.00ea $245.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE57

ELECTROPLATED DIAMOND CORE DRILLS• For tiles & stone• Wet use only• Low usage-short life• 10mm dia shaft• Drilling depth - 6,8 &10mm is 30mm; 13-120mm is 40mmDIAMOND TOOLS - DRILLINGCode Dia(mm) 1-2 3+ Code Dia(mm) 1-2 3+DYD-006EWR 6 $10.45ea $8.40ea DYD-051EWR 51 $80.85ea $64.70eaDYD-008EWR 8 $14.10ea $11.60ea DYD-054EWR 54 $85.35ea $68.30eaDYD-010EWR 10 $15.00ea $12.00ea DYD-063EWR 63 $100.00ea $80.00eaDYD-013EWR 13 $22.70ea $18.20ea DYD-067EWR 67 $106.50ea $85.20eaDYD-018EWR 18 $31.35ea $25.00ea DYD-073EWR 73 $115.80ea $92.60eaDYD-020EWR 20 $34.05ea $27.00ea DYD-083EWR 83 $131.65ea $105.30eaDYD-025EWR 25 $43.15ea $34.50ea DYD-086EWR 86 $136.20ea $108.90eaDYD-027EWR 27 $46.55ea $37.50ea DYD-090EWR 90 $142.55ea $114.00eaDYD-030EWR 30 $52.25ea $42.00ea DYD-095EWR 95 $149.85ea $119.90eaDYD-032EWR 32 $55.65ea $44.50ea DYD-100EWR 100 $158.90ea $127.10eaDYD-036EWR 36 $62.65ea $50.00ea DYD-110EWR 110 $186.15ea $148.90eaDYD-038EWR 38 $65.85ea $52.70ea DYD-115EWR 115 $199.80ea $159.80eaDYD-045EWR 45 $71.50ea $57.20ea DYD-120EWR 120 $208.85ea $167.00eaPREMIUM DIAMOND CORE DRILLS• For tiles,marble,granite & porcelain• Wet use only• 40mm drilling depth• 12mm dia shaftCode Dia(mm) 1-2 3+ Code Dia(mm) 1-2 3+DRD-006BWH 6 $77.00ea $61.50ea DRD-055BWH 55 $234.00ea $187.50eaDRD-008BWH 8 $84.00ea $67.20ea DRD-060BWH 60 $252.00ea $201.50eaDRD-010BWH 10 $88.50ea $70.80ea DRD-065BWH 65 $266.00ea $212.80eaDRD-012BWH 12 $100.00ea $80.00ea DRD-070BWH 70 $275.00ea $220.00eaDRD-016BWH 16 $111.00ea $88.80ea DRD-075BWH 75 $290.00ea $232.00eaDRD-020BWH 20 $125.00ea $100.00ea DRD-080BWH 80 $318.00ea $254.50eaDRD-025BWH 25 $132.00ea $105.00ea DRD-085BWH 85 $343.00ea $275.00eaDRD-030BWH 30 $177.00ea $140.00ea DRD-090BWH 90 $365.50ea $290.00eaDRD-035BWH 35 $188.50ea $150.00ea DRD-095BWH 95 $379.50ea $300.00eaDRD-038BWH 38 $195.00ea $156.00ea DRD-100BWH 100 $404.00ea $325.00eaDRD-040BWH 40 $202.00ea $160.00ea DRD-110BWH 110 $456.00ea $360.00eaDRD-045BWH 45 $211.00ea $169.00ea DRD-115BWH 115 $477.00ea $380.00eaDRD-050BWH 50 $215.50ea $172.00ea DRD-120BWH 120 $510.00ea $408.00eaDIAMOND CORE DRILL GUIDE• Suction cup base• Adjustable for 6-83 dia core drill bitsCode 1-2 3+DYA683DGD $55.65ea $44.50ea58 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

DIAMOND CORE DRILL• General Purpose Masonary• Dry use only• 140mm drilling depth• B.S.P thread• Must be used with either one of adapters shown belowCode Dia(mm) 1-2 3+DRD-032BDT 32 $118.00ea $94.50eaDRD-038BDT 38 $124.85ea $99.90eaDRD-052BDT 52 $141.00ea $112.90eaDRD-065BDT 65 $152.00ea $121.60eaDRD-078BDT 78 $197.50ea $158.00eaDRD-107BDT 107 $247.50ea $198.00eaDRD-117BDT 117 $259.00ea $207.90eaDRD-127BDT 127 $265.50ea $212.50eaCORE DRILL CHUCK ADAPTERS• 12mm hex to suit 3 jaw chuckCode 1-2 3+DRA-030HAD $18.00ea $14.50ea• To suit SDS chuck -40mm longCode 1-2 3+DRA-040SAD $18.00ea $14.50ea• To suit SDS chuck -170mm longCode 1-2 3+DRA-170SAD $48.00ea $38.50eaDIAMOND TOOLS - DRILLINGCORE DRILL SETS• For general purpose masonarySet - 38,52 & 65mm core drill ,SDS & hex adapters, Driftkey,pilot drill,guide rod, 230mm extension,carry caseCode 1 2+DRD-03D $647.00ea $510.00eaSet - 38,52,65,117 & 127mm core drills, SDS & hex adapters,Drift key,pilot drill,guide rod, 230mm extensionCode 1 2+DRD-05D $1124.00ea $899.00eaASK FOR OUR CORE DRILL TECHNICAL SHEET FORINFO TO HELP MAXIMISE CORE DRILL LIFEE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE59

MASONARY DRILLINGSDS-PLUS MULTI-FIT 10MM• Aggressive tungsten tip for faster drilling shank• Double flute for fast dust removal preventing jamming profileWorking Length(WL)Overall Length(OL)MASONARY DRILLINGCode Dia(mm) WL(mm) OL(mm) 1-9 10+10503026 5.0 100 160 $9.03ea $7.25ea10503028 5.5 100 160 $9.25ea $7.40ea10503030 6.0 100 160 $9.25ea $7.40ea10503032 6.5 100 160 $9.40ea $7.90ea10503036 7.0 100 160 $9.40ea $7.90ea10503039 8.0 150 210 $11.80ea $9.45ea10503043 10.0 150 210 $13.20ea $10.60ea10503098 10.0 400 460 $31.50ea $25.20ea10503048 12.0 170 230 $18.70ea $14.95ea10503700 12.0 400 460 $36.60ea $26.00ea10503051 13.0 170 230 $21.40ea $17.00ea10503054 14.0 150 210 $21.40ea $17.00ea10503059 16.0 150 210 $26.50ea $21.20ea10503703 16.0 400 460 $39.90ea $31.90ea10503705 18.0 150 210 $79.80ea $63.80ea10503012 20.0 240 300 $48.30ea $38.70ea10503013 20.0 400 460 $63.00ea $50.40ea10503016 22.0 400 460 $74.60ea $59.60ea10503018 24.0 240 300 $90.50ea $72.50ea10503020 25.0 240 300 $92.40ea $74.00eaSDS-MAX HAMMER DRILL BITS 18MM• Larger than average side tips for rounder holes• Improved flute design to prevent clogging• Surface treatment to help prevent breakageWorking length (WL)Overall length (OL)Code Dia(mm) WL(mm) OL(mm) Cutting Edges 1-4 5+10502093 12 400 500 2 $102.90ea $82.30ea10502095 14 200 340 2 $92.80ea $74.25ea10502100 16 400 540 4 $134.40ea $107.50ea10502102 18 400 540 4 $140.70ea $112.50ea10502104 20 400 520 4 $147.00ea $117.50ea10502107 22 400 520 4 $189.00ea $151.50ea10502110 24 400 520 4 $195.30ea $156.50ea10502112 25 400 520 4 $203.70ea $162.90ea10502116 28 450 570 4 $210.00ea $168.00ea10502119 30 450 570 4 $222.60ea $178.00ea10502127 38 450 570 4 $315.00ea $252.00ea60 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

FORM RELEASE• precasters favourite• General purpose release agent for steel moulds, formwork and concrete beds• 20-30m 2 /LitreCode Drum cap-litres PriceFR20L 20 $98.00eaFR200L 200 $530.00eaEVAPORATION CURE• Stops cracking in hot & dry weather while concreteis still being worked• Dilute 1:4• Apply 10m 2 /LitreCode Drum cap-Litres PriceEC20L 20 $125.00eaEC200L 200 $1050.00eaCONCRETE LAYERS ACCESSORIESECOLESE• Environmentally friendly• Water-based release agent for the environment• Suitable for formwork and concrete beds• 18m 2 /LitreCode Drum cap-litres PriceEL20L 20 $120.00eaEL200L 200 $850.00eaSURFACE RETARDER• For exposed aggregate work on concrete 20MPaand less• 3-5m 2 /LitreCode Drum cap-litres PriceSR20L 20 $84.00eaSR200L 200 $520.00eaSURFACE RETARDER PLUS• For exposed aggregate work on concrete 20MPaand over• Ideal for use in hot weather• 3-5m 2 /LitreCode Drum cap-litres PriceSRP20L 20 $99.00eaSRP200L 200 $650.00eaVERTICAL SURFACE RETARDER PLUS• For use on formwork• 3-5m 2 /LitreCode Drum cap-litres PriceVSRP20L 20 $235.00eaVSRP200L 200 $1050.00eaCONCRETE CONDITIONER• For a hard,dust free concrete floor• 1st coat - 4-6m 2 /Litre• 2nd coat - 6-8m 2 /LitreCode Drum cap-litres PriceCC20L 20 $73.00eaCC200L 200 $420.00eaSUPER PLASTICISER• Maintains flowability and allows major water reduction• 1-3 litres/m 2Code Drum cap-Litres PriceSP20L 20 $130.00eaSP200L 200 $960.00eaLATEX CONCENTRATE• Gives greater adhesion,flexibility and waterproofingto your plasters & mortars• 1-4 cups/concrete mixerCode Drum cap-Litres PriceLC5L 5 $69.00eaLC20L 20 $230.00eaMORTAR PLASTICISER• A great plasticiser for the masonary trade• 50ml/concrete mixerCode Drum cap-Litre PriceMP20L 5 $82.00eaMP200L 200 $590.00eaCOMPOUND SPRAYERS• 8L cannister• Chemical resistance hose• Brass lance• Fan nozzle• Made in GermanyCode 1-3 4+A040608 $198.00ea $178.00ea• 10L cannister• Brass pump & supply tube• Steel cannister with pressure gauage• Chemical resistance hose• Made in GermanyCode 1-3 4+A040710 $379.00ea $340.00eaSLABCURE• Sodium silicate based curing compound with noeffect on future painting or floor adhesives• 4-6m 2 /LitreCode Drum cap-litres PriceSC20L 20 $73.00eaSC200L 200 $420.00eaMEMBRANE CURE• Degradeable membrane cure meeting industrystandards• 6-8m 2 /LitreCode Drum cap-Litres PriceMC20L 20 $99.00eaMC200L 200 $740.00eaFreight 20 Litre drum 200 Litre drumN.I $15.00ea $40.00eaS.I $18.00ea $60.00eaBUY IN BULK - 1000 LITRE CONTAINERS AVAILABLE - ASK FOR A QUOTE62 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

SOAKER HOSE• Easy to layout & wind up• No more tangles & twists• Up side indicationHOSE JOINER/REPAIR• Fits 12mm hoseCode 1-9 10+014733 $5.35ea $4.30ea15mts with stakeCode 1-4 5+OF0150 $39.00ea $33.90ea15mts with reel & stakeCode 1-4 5+OFR150 $54.20ea $44.00eaUNIVERSAL TAP ADAPTOR• Suits either 3/4 or 1” outletsPlasticCode 1-9 10+014634 $4.20ea $3.40eaBrassCode 1-9 10+015143 $14.30ea $12.20eaWATER HOSE• 12mm diametre• No1 selling hose in NZ30mts with plastic fittings & nozzleCode 1-4 5+217302 $59.00ea $48.00ea50mts with no fittingsCode 1-4 5+211508 $69.00ea $57.50ea100mt with no fittingsCode 1-4 5+211003 $142.00ea $115.00eaADUSTABLE SPRAY GUNCode 1-4 5+014894 $26.70ea $21.40eaOSCILLATING SPRINKLER• Covers 16 x 10 metres approx• 15 brass spray nozzlesCode 1-3 4+015761 $42.80ea $34.20eaHOSING / SPRINKLERSFOX BLUE LAYFLAT WATER HOSE• Working pressure-4 bar• 100 metre coilsCode Dia per metre per coil13-4156 25mm-1” $3.78ea $320.00ea13-4157 38mm-1½” $4.63ea $393.00ea13-4158 50mm-2” $5.38ea $457.00ea13-4159 76mm-3” $9.85ea $837.00eaCAMLOCK FITTINGS FOR LAYFLAT HOSECode Dia(mm) Male FemaleCL25 25 $14.90ea $25.60eaCL38 38 $16.30ea $27.30eaCL50 50 $21.70ea $34.20eaCL76 75 $34.60ea $58.00eaSEE PAGE 84 FOR PUMPSPULSE SPRINKLER• Covers a circle of upto 24 metres diameter• Brass head on a heavy duty metal base:Code 1-3 4+014597 $94.80ea $75.90eaHOSE REELS• 60 metre capacity• Orange powder coated• Galvanised steel drum• NZ madeCode 1-4 5+AT24704 $113.80ea $96.70eaNOZZLE SETCode 1-4 5+014870 $25.80ea $20.60eaWith wheels and extended handleCode 1-4 5+AT24705 $130.60ea $111.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE63

TIE-DOWN PRODUCTSQuality specialist NZ made tiedowns and strops designed to meet and oftenexceeds NZ industry standardsTRUCK 6 METRE TIE-DOWN• 2500kg capacityCode 1-5 6+T6 $52.00ea $48.10eaTRUCK 9 METRE TIE-DOWN• 2500kg capacityCode 1-5 6+T9 $56.00ea $51.80eaTIE DOWN PRODUCTSLIGHT COMMERCIALTIE-DOWN• 6mt x 37mm• 700Kg capacityCode 1-5 6+LC37-06 $40.00ea $37.00eaCOMMERCIAL TIE-DOWN• 6mt x 50mm• 900Kg capacityCode 1-5 6+C50-06 $47.00ea $43.50eaTRIPLE PACK FASTLOCK TIE-DOWN• 4mt x 25mm• 300Kg capacityCode 1-5 6+TPFLK4 $45.00ea $42.00eaTOW STRAP• 4500 kg capacity• 50mm wide• 10(TR10) & 20mt(TR20) optionsCode 1-5 6+TR10 $37.00ea $34.30eaCode 1-5 6+TR20 $60.00ea $55.50ea64 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

CERTIFIED TRANSPORT CHAINCode Capacity(kg) Chain dia(mm) 1-10 metres 10 metres +6707.3 3000 7.3 $16.25mtr $13.00mtr6708.0 4000 8.0 $16.25mtr $13.00mtr670.10 6000 10.0 $27.40mtr $22.90mtrTWITCHES LEVERS• To suit 7-8mm chainCode 1-2 3+TW7/8 $66.00ea $57.75ea• To suit 10-13mm chainCode 1-2 3+TWL10 $84.00ea $73.50eaRATCHET TWITCHERS• To suit 7-8mm chainCode 1-2 3+TWR7/8 $80.00ea $69.20ea• To suit 10.0mm chainCode 1-2 3+TWR10 $90.00ea $55.50eaGRAB HOOKS• To suit 7-8mm chainCode 1-5 6+G7/8 $9.95ea $8.70eaTIE DOWN PRODUCTS• To suit 10mm chainCode 1-5 6+G10 $12.95ea $10.40eaPROFESSIONAL CERTIFIED LIFTING SLINGSCode Capacity(kg) Length(mm) Width(mm) 1-2 3+2T2M 2000 2000 50 $133.60ea $116.80ea2T4M 2000 4000 50 $211.90ea $185.40ea2T6M 2000 6000 50 $290.20ea $253.90ea3T2M 3000 2000 75 $185.90ea $162.70ea3T4M 3000 4000 75 $298.00ea $260.70ea3T6M 3000 6000 75 $425.90ea $372.70ea4T2M 4000 2000 100 $233.70ea $204.50ea4T4M 4000 4000 100 $399.00ea $349.10ea4T6M 4000 6000 100 $524.30ea $458.70ea6T2M 6000 2000 150 $345.50ea $302.30eaTRADE CERTIFIED LIFTING SLINGSCode Capacity(kg) Length(mm) Width(mm) 1-2 3+IMP2T2M 2000 2000 50 $86.25ea $69.00eaIMP2T4M 2000 4000 50 $148.70ea $118.80eaIMP3T3M 3000 3000 75 $169.70ea $129.80eaIMP3T5M 3000 5000 75 $246.50ea $198.00eaPROFESSIONAL CERTIFIED ENDLESS SLINGSCode Capacity(kg) Length(mm) Width(mm) 1-2 3+ER1T2M 1000 2000 50 $ 59.80ea $ 52.30eaER2T3M 2000 3000 50 $117.20ea $102.50eaER3T4M 3000 4000 75 $284.00ea $248.50eaER4T6M 4000 6000 75 $372.40ea $325.80eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE65

HANDTRUCKS2500KG PALLET TRUCKCode 1-3 4+PL2742 $725.00ea $675.00eaHAND TROLLEYSGENERAL PURPOSE• 250mm dia pneumatic tyre• 150kg capcityCode 1-3 4+HT1805 $73.50ea $59.00eaHANDLING EQUIPMENTGENERAL PURPOSE HEAVY DUTY• 250mm dia pneumatic tyre• 200kg capcityCode 1-3 4+HT-SL $358.00ea $310.00eaGENERAL PURPOSE• Ideal for 220L drum or ‘G’ size gas bottles• 200kg capacityCode 1-3 4+DT220 $590.00ea $510.00eaGAS TROLLEY• 200mm dia solid tyre• 120kg capacityCode 1-3 4+HT1418 $141.00ea $123.00eaHYDRAULIC TROLLEY• 700 x 450mm table• 720mm max height• 150kg capcityCode 1-3 4+PL150-SL $599.00ea $542.00eaGREENS CONTRACTOR WHEELBARROW• New Zealand most popular heavy duty Wheelbarrow• Tray capacity - 67litres• Boltless thick gauge steel tray• Heavy grade pneumatic tyre• Large bore thick gauge frame• Galvanised or painted tray• Total weight - 23.7kgCode 1-2 3+CON67 $230.20ea $215.80eaGREENS POLY POURER• Benefit from the easy fo use, poly bolt free tray• Tray capacity - 56litres and total weight 18kgs• Easy clean, bolt free tray design• High density UV stabilised poly with pourer• Large bore, thick gauge frame• Heavy grade pneumatic tyreCode 1-2 3+PP56 $188.60ea $176.80ea66 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

DUST EXTRACTORS - WORK FAST & CLEANSTARMIX EXTRACTORS - FROM GERMANY• 1000 watt motor - 32 cannister, perfect for generalcleaning• Powertool socket - auto on/off• Suitable for wet & dry use• Complete with floor tools & 3.2mt hoseCode 1-2 3+GS10/32EH $655.00ea $590.00eaDust Bags-5 pc packCode 1-9 10+413-099 $35.00ea $29.00eaNOTE: Not suitable for use in conjunction withplaster sanders and concrete grinders.• 1200 motor - 30L cannister for Plasterers& Painters• Powertool socket - auto on/off• Suitable for wet & dry use• Complete with floor tools & 3.2mt hoseCode 1-2 3+GSA1230 PP $850.00ea $765.00eaDust Bags-5 pc packCode 1-9 10+413-099 $35.00ea $29.00eaIS SERIES - SERIOUS SUCTION• 1400watt - 50L cannister for wall chasers andhand held concrete grinders• Powertool socket - auto on/off• Suitable for wet & dry use• Filter vibrator for ease of filter cleaning & extendedlife• Squat, square design for stability• Suction pressure control• Complete with floor tools & 5.0mt hoseCode 1-2 3+ISARD 14/50EWS $1650.00ea $1485.00eaDust Bags-5 pc packCode 1-9 10+416-021 $85.00ea $76.00eaDUST EXTRACTIONHS SERIES - SUPER HEAVY DUTY SUCTION• 1400watt - 55L Heavy Duty Stainless Steelcannister• Powertool socket• High output submersible pump• Suitable for wet & dry use• Filter vibrator for ease of filter cleaning& extended life• Suction pressure control• Complete with floor tools & 5.0mt hoseCode 1-2 3+HSPA1455KFG $2935.00ea $2640.00eaDust Bags-5 pc pack(Dry), 3pc pack (Wet)Code 1-9 10+413-044(dry) $85.00ea $76.00ea420-592(wet) $110.00ea $99.00eaFLOOREX SUPA SEPARATOR• Separates out up to 93% dry and 99% wet waste,inceasing vacuum performance by up to 400%• Reduces filter blockages• Easy to empty, done in just seconds• Rugged poly-construction with hard wearingrubber castors• Place in-line between any small concrete grindingor cutting tool and the dust collector• Suits any vacuum hose with 50mm cuff ends• Suitable for most dusts and liquids( not recommended for solvents )• Incudes connector hose and 30m x 50mm hoseCode 1-2 3+CPS24-50 $780.00ea $720.00eaSEE PAGE 68 FOR ACCESSORIESE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE67

DUST BAG• Pack of 5To suit GSA 10/32 EHCode 1-2 3+413-099 $35.00ea $30.00eaCARTRIDGE FILTERSTo suit GSA 12/30 PPCode 1-2 3+413-372 $135.00ea $120.00eaTo suit GSA 10/32 EHCode 1-2 3+411-729 $55.00ea $45.00eaTo suit HSPA 14/55 KFGCode 1-2 3+413-464 $135.00ea $120.00eaDUST EXTRACTIONTo suit ISARD 14/50 EWSCode 1-2 3+416-069 $180.00ea $162.00eaper set of twoPREFILTER• Heavy duty polyester prefilter for excellentfilter protection against sharp objects• Suits only GSA 10/32 EH & GSA 12/30 PPCode 1-2 3+413-082 $145.00ea $130.00eaEXTRACTOR HOSE3.2mt x 35mm diaCode 1-2 3+414-225 $95.00ea $85.00ea5.0mt x 35mm diaCode 1-2 3+413-235 $105.00ea $94.00ea5.0mt x 49mm diaCode 1-2 3+425-207 $180.00ea $160.00eaCOARSE DIRT KIT49mm x 1.75m hose, 2 x 49mm plastic extensions,hard brush floor tool, course dirt floor tool and crevicetoolCode 1-2 3+044-309 $150.00ea $135.00ea68 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

GRINDING SHROUDS 32MM DIA HOSESuits 115 & 125mm diamond wheel• 42mm collar diaCode 1-4 5+254-213 $105.00ea $93.50eaAdditional rubber ring for optimum extraction• Suits 254-213Code 1-4 5+257-246 $66.00ea $52.80eaSuits 178mm dia diamond grinding wheels• 63mm collar dia• Rubber ring fittedCode 1-4 5+258-622 $255.00ea $180.00eaSANDING SHROUD• Suitable for 115mm discs• 46mm collar diaCode 1-4 5+251-682 $125.00ea $99.00ea• Suitable for 178mm discs• 63mm collar diaCode 1-4 5+254-177 $205.00ea $164.00eaDUST EXTRACTIONCUTTING GUARDS 34MM DIA HOSE• Dry cutting guard• Dust extraction port125mm diaCode 1-4 5+254-797 $225.00ea $180.00ea150mm diaCode 1-4 5+254-796 $225.00ea $180.00ea230mm diaCode 1-4 5+252-963 $390.00ea $312.00ea300mm dia (without extraction port)Code 1-4 5+255-739 $265.00ea $212.00ea• Wet cutting guard150mm diaCode 1-4 5+257-087 $330.00ea $265.00ea230mm diaCode 1-4 5+257-086 $330.00ea $265.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE69

UNIVERSAL CLAMP• 38cm adjustable• Compact,quick mounting vertical,horizontal, flat,round orsquare surfacesCode 1-4 5+0320140 $195.00ea $175.00eaWALL BRACKET• Heavy duty adjustable bracket• Clamp & anchor mountCode 1-4 5+0320138 $275.00ea $235.00eaPOLE CLAMP HOLDER• 1-5cm clamp-heavy duty• Quick release systemCode 1-4 5+0320110 $240.00ea $216.00eaCAPITAL EQUIPMENTSWISS LEVELLASER GLASSESCode 1-4 5+0320210 $28.00ea $24.00eaMAGNETIC TARGET• Without standCode 1-4 5+0320191 $25.00ea $21.00ea• With standCode 1-4 5+0320193 $31.00ea $25.00UNIVERSAL DETECTOR• Double sided displayCode 1-4 5+401507 $360.00ea $325.00eaBRACKET TO SUIT GRADE RODSCode 1-4 5+0401603 $45.00ea $34.00eaGRADE RODS• Reflective surface• Quick releaseCode 1-4 5+0320205 $195.00ea $167.00ea5 METRE TELESCOPIC LASER ROD• Front cm markings,back mm markings• Zero of mm markings start at floorCode 1-4 5+0320208 $95.00ea $85.00eaADJUSTABLE POLE 85CM TO 380CM• Clamp holder & carry case includedCode 1-4 5+0320105 $125.00ea $112.00eaADJUSTABLE POLE 2.1MT - 3.75MT• Quick release lock clamp• Rubber floor/ceiling feet• Clamp holderCode 1-4 5+0320104 $550.00ea $495.00ea72 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

LEICA DISTOA2• Measuring range 0.05m up to 60m; typ accuracy ±1.5mm• Handy size, fits into every pocket• Easy to use shortcut keys• Illuminated 2-line display can be read in the dark• Ergonomically designed• Stake-out equal distances functionCode 1 2+DISTOA2 $495.00ea $457.00eaLEICA DISTOA3• Measuring range 0.05m up to 100m; typ accuracy ±1.5mm• Measure up to 80m without the need of target plate• Continuous measurement of minimum and maximum distances• 4-line illuminated display read several measurments at once• Integrated spirit-level function• Target asistance for lining up targets over longer distances• IP54 spray water and dust proofCode 1 2+DISTOA3 $710.00ea $656.00eaLEICA DISTOA5• Measuring range 0.05m up to 200m; typ accuracy ±1.5mm• Measure up to 100m without the need of target plate• Ergonomic design with soft rubber grip• Integrated telescopic viewfinder with 2 x zoom• Flip-out end piece for reliable measurments from edges or corners• Automatic room calculations• Indirect height/width measurments of inaccessible locations• IP54 spray water and dust proofCode 1 2+DISTOA5 $950.00ea $879.00eaCAPITAL EQUIPMENTMEASURING INSTRUMENTSLEICA DISTOA6• Measuring range 0.05m up to 200m; typ accuracy ±1.5mm• Measure up to 100m without the need of target plate• Integrated telescopic viewfinder with 2 x zoom• BLUETOOTH® technology for wireless transfer of data• DISTO transfer data to Excel® & other programs• Direct control of Pocket PC enables comfortable & fast measurements• IP54 spray water and dust proofCode 1 2+DISTOA6 $1365.00ea $1260.00eaLEICA DISTOA8• Measuring range 0.05m up to 200m; typ accuracy ±1.5mm• Measure up to 100m without the need of target plate• Integrated telescopic viewfinder with 3 x zoom• Measure tilts simply by setting the housing on the object• Indirect tilt measurements• Inaccessible height & distance measurments• Greyscale display with 9 brightness settings• IP54 spray water and dust proofCode 1 2+DISTOA8 $1995.00ea $1845.00eaTELESTAFF 3M/5MTelescopic measuring rods are designed to measure the inside dimensions of openingsas doors and windows. Strong aluminium telescopic tubes, built-in measuring tape with aheavy duty automatic rewind system. Easy-to-read display with a vertical spirit level thatallows accurate and quick measurements.Code length 1-2 3+TLSTF3 3m $130.00ea $109.00eaTLSTF5 5m $195.00ea $172.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE73

MOISTURE METERSThis A55 is truly a professional tool for determining moisturecontent in wooden base materials. The measurementpins are mounted in a separate held sensor on a cord. Thiscombination allows the measurements to be made in outof the way areas, and still read easily on the oversize LCDdisplay. To check ambient temperature or determine maximummoisture content from several measurement pointssimply press the button.• Accuracy+/-1%, +/1 0 C• Range 0-50%, -10-80• Working range

FEIN SUPERCUT - Saw where no other saw can get toThe FEIN professional set for carpenters / interior fitters begins a new era of construction: Everything becomes easier andfaster. In all locations where circular, sabre, or jig saws have no chance and a chisel would require too much manual effort,the FEIN SuperCut Construction effortlessly completes the job in record time. Free space is not required alongside or behindthe work piece. This often saves you bothersome disassemblies. Even hard to reach places can be worked on, because theingenious E-Cut saw blade can be attached to the FEIN SuperCut Construction at any angle for sawing in furniture.The set for carpenter / interior fitters with complete E-Cut selection.• For all construction and sawing work, even in hard-to-reach places• Brings speed to every construction site.• Sawing without previous disassemblies. No free space required alongside or behind the work piece.• High cutting speed and high precision.• Plunge into material just like a mortise chisel.• Clean cuts even by hand; no clamping of the workpiece necessary.• Convert to a versatile triangular sander with hign sanding capacity.Precise cuts even freely by hand are alwayspossible. The E-Cut precision saw bladesensure clean cross cutsTrim door frames perfectly. The offsetpermits sawing flush to the surface.E- Cut universal s aw blades are evenoutstanding for metal profiles and drywalldue to their high cutting speedsSimply plunge in without any complicatedpreparations.FEIN SUPERCUT Renewing sealant in record timeSanding in corners and at edges. Use thesupplied adaptor to quickly turn the FEINSuperCut into a triangular sander.The FEIN professional set for carpenters / interiorfittersConsisting of: 1 FEIN SuperCut Construction intool case; 4 E-Cut standard saw blades; 4 E-Cutprecision saw blades ; 1 depth stop; 1 adaptor; 1sanding pad; 5 each sanding sheets, grain 80, 120,180; 1 wrench.Code 1-2 3+FEINSC1 $1555.00 $1450.00The FEIN SuperCut Construction with the professional set for grouting renewers makes it a good deal easier. It can do the job 60% fasterthan when using a hand saw or box cutter. All elastic sealants can be removed - in interiors, on facade, or cement floors. The extracting of thedamaged material and the roughening of the flanks for new rejoining is done with only one one device. For continuous use on floors or facadesan auxiliary handle is included in the set that makes working with almost no fatigue possible. In cramped conditions doing interiors, youcan work optimally without the auxiliary handle. You can attach a dust extraction device so that pollution is noticeably reduced in theimmediate work area. The locally valid national regulations need to be observed when extracting sealant materials that are harmfulto health . Renew sealant/joints fast, cleanly and reliably with the set for sealant repairers.• Rapid work progresses with comparatively little effort• Optimal ergonomic design for fatigue-free working.• HIGH-POWER MOTOR for supreme preformance and stability.• Use indoord and outdoors• Vibration-attenuating bail handle for minimising physical fatigue.• Tool-free attachable dust extraction device.Subsequent cutouts into mounted flooringcan be done quickly and neatlyCAPITAL EQUIPMENTFEIN TOOLSDeep seams have been very difficult to workon by hand - up till now.Elastic joint fillers can be convenientlyextracted by the straight cutter blade.Safer working with FEIN: the dust extractiondevice noticeably reduces pollution in theimmediate work area.The mortar flanks are cleaned and roughenedbefore the rejoining by the diamond-coatedcleaning knife.The FEIN professional setfor grouting renewersConsisting of: 1 FEIN SuperCut Construction inmetal tool case; 1 bail handle; 1 extraction hood;5 cutter blades, straight; 1 cutter blade, straight,long; 2 cleaning knife, diamond-coated, straight;1 wrench.Code 1-2 3+FEINSC2 $1895.00 $1695.00E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE75

Cut flush to surface when working with skirtings & doorsMasterMultiple Taskswith easeCAPITAL EQUIPMENTFEIN TOOLSPlunge cut up to 50mm - fast & neatlyRemove oil patches and graffiti with the carbine raspRemoving old adhesive and carpet...no sweat!Wood with nails - no problems!Effortlessly removing tiles without the messRepairing the hull with depth controlRemove grout with very little dust & without damageRemoving brittle putty without the risk of glass breakageAdding fittings with precision & easeRemove tile adhesive efficientlyUltra thin sanding pad for tight spacesCutting out marine glue and polyurethaneRemove tile adhesive efficientlyProfile sanding with ease - 6 different profilesCuts pipes flush with easeHigh cutting power on timber & fiberglass76 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

FEIN MULTIMASTERRENOVATION SYSTEMFEIN MultiMaster - the one tool that'll do it all...FEIN MultiMaster is one of the most versatile special tools - designed for theprofessional and the home handyman to perform a massive range of applications- saw, scrape, seperate, rasp, polish, cut, compact cement and many other tasks- producing professional results everytime.During the oscillating action, each accessory you fit moves with a frequencyof up to 21 000/min along a minimal arc of 3.2 angular degrees. Thismethod of functioning provides unrivalled versatility with uniqueadvantages.• Work without kick-back into the smallest corners and onedges.• High sanding capacity with virtually no pressure forcerequired• Perfectly smooth running; the tool does not move on itsown• Extremely versatile compared with competative products• Very safe to handle• Built to exacting standards of the prestigious German manufacturersSTART - THE BASIC MODELThe Start set contains the most importantaccessories for accomplishing the mostcommon tasks: sanding, scraping and sawing.The Start Multimaster provides you with anextremely smooth-running professional deltasander for maximum sanding capacity, witha powerful scraper and with an oscillating saw.Start contents:1 MultiMaster MSx 636 11; 1 sanding pad; 5of each type of sanding sheet, grain 60, 80,120 and 180; 1 rigid stopping knife; 1 E-Cutsaw blade, 35mm; 1 key; mounting boltsSELECT - WITH ADDED VALUE.The Select package includes the MultiMaster MSxe 633 11 withelectronics as well as two additional saw blades;1 HSS segment saw for wood putty or soft materials, fiberglass,carbon fibre-reinforced plastic and sheet metal to 1mm; 1 carbidetippedsegment saw blade for cutting out tile joints. This considerablybroadens the FEIN MultiMaster's range of applications.Select contents:1 MultiMaster MSxe 636 11 with electronics;1 sanding pad; 5 of each type of sanding sheet, grain 60, 80,120 and 180; 1 rigid stopping knife; 1 E-Cut saw blade, 35mm;1 HSS segment saw blade; 1 carbide segment saw blade; 1 key;mounting boltsTOP - THE FULL WORKS.The additional carbide rasp can be used for sanding down tileadhesive, on natural and artificial stone, for removing graffitifrom concrete and stone facades, for coarse sanding, etc.Plus, exclusive to the Top package; the MiniCut & Diamondsharpening set with matching saw blades as well as everythingyou need to ensure dust-free working. In a sturdy metal carryingcase.Top contents:1 MultiMaster MSxe 636 11 with electronics, in metalcarrying case and containing the Select equipment plus:1perforated carbide rasp: 1 MiniCut & Diamong sharpening set;1 perforated sanding pad; 5 of each type of sanding sheet,perforated, grain 60, 80, 120 and 180; 1 suction device.CAPITAL EQUIPMENTFEIN TOOLSCode 1-2 3+MLTMSTR1 $449.00ea $399.00eaCode 1-2 3+MLTMSTR2 $649.00ea $599.00eaCode 1-2 3+MLTMSTR3 $799.00ea $699.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE77

FEIN HandyMaster:Setting new standards for design andergonomics.HANDYMASTER ABS 9The small one for perfect results: light and handy cordless drill/driver with 9.6V andup to 1.4Ah capacity. Drilling in steel up to ø 10mm, in wood up to ø 20mm, screwsup to 5mm ø.• 0-600 rpm • Only 1.4 Kg • Supplied with carry case with 2 batteries• Torque adjustable • ReversibleCode 1-2 3+HDYMN9 $379.00ea $349.00eaHANDYMASTER ABS 12For greater challenges: the 2-gear machine with 12V and up to 2Ah capacity. Drillingin steel up to ø 13mm, in wood up to ø 30mm, screws up to 7mm ø.• 0-400 / 0-1,400 rpm • 2.0 Kg • Supplied with carry case with 2 batteries• Torque adjustable • ReversibleCode 1-2 3+HDYMN12 $589.00ea $560.00eaCAPITAL EQUIPMENTFEIN TOOLSHANDYMASTER ABS 14Identical to ABS 12, but with greater performance: 14.4V. Drilling in steel up to ø13mm, in wood up to ø 32mm, screws up to 8mm ø.• 0-400 / 0-1,400 rpm • 2.1 Kg • Supplied with carry case with 2 batteries• Torque adjustable • ReversibleCode 1-2 3+HDYMN14 $679.00ea $649.00eaHANDYMASTER ABS 18Pure power: the 2-gear machine with 18V and up to 2Ah capacity. Drilling in steel upto ø 13mm, in wood up to ø 50mm, screws up to 10mm ø.• 0-400 / 0-1,400 rpm • 2.9 Kg • Supplied with carry case with 2 batteries• Torque adjustable • ReversibleCode 1-2 3+HDYMN18 $770.00ea $740.00eaHacksaws for pipes up to Ø 440mmPOWERFUL HACKSAW FOR PIPES AND PROFILED SECTIONS• Ideally suited for trimming pipes and shaped section made of steel,cast-iron, autoclaved aerated concrete and plastics.• Clamp and feed device available for profiles and pipes from Ø 80mmto Ø 400mm• Adjustable clamping devices permit mitre cuts up to 450 as well.• Especially suitable for sandwich material and layers of differentmaterialsASTXE 649• Variable electronic speed control for optimum cutting speed.• 750 Watt Motor• 350 Strokes per min.• 60mm stroke length• Cutting capacity -profiles 290(w) x 550(h), 440mm Ø pipes(with chain extension)Code 1 2+ASTXE649 $4370.00ea $3940.00eaMOT 6-18-2• Pneumatic powered version of the ASTXE 649Code 1 2+MOT6182 $5535.00ea $4999.00ea78 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

The HIGH-POWERGrindersfrom FEINThe FEIN rapid clamping system QuickIN ensures thatthe disc is safely clamped at all times. EBS drasticallyreduces the risk of injury when the angle grinder is putdown, adds not a single gram of extra weight and iscompletely maintenance and wear-free.Changing discs is simplicity itself: Open the clamp lever.Unscrew the clamping unit.FEIN WSG SERIES ANGLE GRINDER• M14 THD FOR CUTTING & GRINDING WHEELS, WIRE BRUSHES ETC.Efficient angle grinder in the 2000W class with M 14 spindle.• HIGH-POWER-MOTOR with enormous torque for high grinding capacity.• Self-start lock prevents uncontrolled reactivation following power supply interruption.• Gentle start for recoil-free and safe starting.• For all grinding, sanding, cutting and brushing applications.• Flattest drive head in this performance class.• Rear handle can be rotated through 4 positions• Coolant air management offers optimum protection against dust.• Quick release swivel guard.• Auto-stop carbon brushesCode Wattage Speed Weight(Kg) Wheel Size 1 2+WSG20-180 2000 8500 4.5 180mm $480.00ea $441.00eaWSG20-230 2000 6600 4.5 230mm $480.00ea $441.00eaCAPITAL EQUIPMENTFEIN TOOLSReplace the disc and replace the clamping unit. Closethe clamp lever. And that's it.All-round freedom of movement.FEIN WSB SERIES ANGLE GRINDER• EBS ELECTRIC BRAKE SYSTEM• CUTTING & GRINDING WHEEL ONLYAngle grinder with EBS is setting new scales of performance and safety in the 2000 watt class• Electric EBS braking system stops the discs in less than 3 seconds.• The braking system is wear-free and maintenance-free• HIGH-POWER-MOTOR with enormous torque for high grinding capacity.• FEIN rapid attachment system QuickIN for fast, simple and reliable disc changes with no tools required• Self-start lock prevents uncontrolled reactivation following power supply interruption.• Gentle start for recoil-free and safe starting.• For all grinding, sanding, cutting and brushing applications.• Rear handle can be rotated through 4 positions• Coolant air management offers optimum protection against dust.• Quick release swivel guard.• Auto-stop carbon brushesCode Wattage Speed Weight(Kg) Wheel Size 1 2+WSB20-180 2000 8500 4.5 180mm $550.00ea $495.00eaWSB20-230 2000 6600 4.5 230mm $550.00ea $495.00eaANGLE GRINDER/SANDER - WSG 12 70 ECompact angle grinder/sander with M 14 spindle. Wide range of usesthanks to large speed range. Ideal for concrete and stainless grinding• 1200 Watt HIGH POWER MOTOR• Variable speed 2700 - 7000 rpm• 125mm wheelCode Wattage Speed Wheel Size 1 2+WSG12-70E 1200 2700 -7000 180mm $525.00ea $480.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE79

INCLUDES 7 PIECECUTTER SETMINI 40/2The Mini 40/2 is so reliable that it hasn't changed for 13years. With a 40mm ø capacity drilling 50mm deep it isthe best option for structural steel and excellent for sitework.• 1200 watt motor• 140mm stroke• Weighs 14.5kg• Magnet 92 x 200mm• 1,200 kg magnetic adhesion• 2 speed 280 and 500rpm• Intergrated coolant system no extra attachment• Very short spindle to reduce the risk of shaft wobbleSupplied with:carrying case, coolant tank, cutting fluid, 13mm chuck &key, safety strap, 22mm cutter, ejector pinCode 1-2 3+MINI40/2 $2354.00ea $1990.00eaCAPITAL EQUIPMENTALFRA MAG STANDPICCOLO 32/50With its extremely compact design and light weight the32/50 can still handle a 32mm ø hole up to 50mm deep• 1050 watt• 400rpm• Magnet size 70 x 160mm• 800kg magnetic adhesion• Adjustable slide for extra throat depthSupplied with:carrying case, coolant tank, cutting fluid, 13mm chuck &key, safety strap, 18mm cutter, ejector pinCode 1-2 3+MINI40/2 $1595.00ea $1450.00eaROTOBEST 60With a 75mm dia core drill capacity the Rotobest 60 is thelightest drilling unit on the market at only 22 kg. With the4 speed gearbox you can tap, ream and drill effectivelyThe swivel magnet make positioning a dream and theadjustable slide for using drill bits up to 32mm dia.• Powerful 1800W motor with clutch• 4 speed gearbox - 100, 175, 245, 385 to suit whateversize you are drilling• Weighs only 22kg• Magnet size only 80 x 230mm for narrow areas – 2000kg magnetic adhesion• No. 3 morse taper output – no wastage of your existingtwist drills• Coolant system to be used with coolant tank supplied• Swivelling magnetic base for ease of use – 330˚ L & Rswivel and 10mm backwards and forwardsSupplied with: carrying case, coolant tank, safety strapand tool holder to use core cuttersCode 1-2 3+ROTOBST60 $3465.00ea $3150.00eaEIBENSTOCK DRILL EHN32 2.2R/L, EHN 32/4.2Fantastic drills for high torque, low speed applicationssuch as twist drills, tapping, line boring & mixing, with a1800 watt motor and a clutch, the EIBENSTOCK drills candeliver the torque and power safely. Made in Germany.EHN 32 2.2R/L• No.3 Morse taper• Variable speed 60-140rpm, 200-470rom• ReversibleEHN 32/4.2• No.3 Morse taper• 4 Speed 110/175/245/385rpm• Non reversibleCode 1-2 3+EHN32 2.2RL $1695.00ea $1450.00eaEHN32/4.2RL $1495.00ea $1250.00eaALFRA ROTABEST CUTTER SETS-25mm drilling depth7 PIECE SET• 1 x 14mm, 16mm, 18mm, 20mm, 22mm, 26mm• One ejector pin12 PIECE SET• 2 x 14mm, 16mm, 20mm, 22mm• 1 x 18mm, 26mm• 2 x ejector pinsCode 1-2 3+HSSCOECO7 $249.00ea $210.00eaHSSCOECO12 $299.00ea $249.00ea80 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

ALFRA Sharpening ServiceON-SITE HAVE A GENUINE ALFRA SHARPENING MACHINE.WE ARE ABLE TO PROVIDE YOU WITH:• Original angles and self-centring chamfering for ultimate cutter performance• Economic and fast repair• Operated by a friendly and experienced saw doctor• Cutters returned hot-dipped for edge protection until next usage• Random drilling spot checks for quality assurancecode cutter size PriceSP1217 12mm-17mm $15.00eaSP1827 18mm-27mm $17.50eaSP2834 28mm-34mm $22.00eaSP3539 35mm-39mm $26.00eaSP4050 40mm-50mm $30.00eaSP6070 60mm-70mm $37.00eaSHARPENING SERVICEEXPRESS SERVICE – WHEN WE RETURN YOUR PROFESSIONALLYSHARPENED CUTTER, WE’LL INCLUDE A PRE-PAID COURIER SATCHELFOR YOU TO SEND THE NEXT LOT OF CUTTERS FOR SHARPENING.ALFRA EDGE PLUS SOLUBLE CUTTING FLUID• Suitable for all cutting & machining applications• 4 - 5% concentration for general use, up to 10% for arduousgrinding applications.• Available in 5 litre only• Made in EnglandCode size 1-2 3+AE5 5LT $89.00ea $82.00eaALFRA ROTOBEST CUTTING FLUID BIO2000Prove it to yourself.• When drilling and cutting steel, substantial costsavings are made by using a robust cutting oil• Alfred Raith GMBH of Germany have beenmanufacturing steel cutting blades, broaches,punches and drills for over 20 years. They nowoffer their own formulated cutting oil to provideoutstanding increase in cutter life.• Synthetic easy-flowing cutting oil with amazinglubricating qualities• Can be used sparingly - very economical• Suits any steel cutting application, eg: hightensile,mild, stainless, bisalloy, heat-treated,alloys and copper• Protects against work hardening and corrosion• Doesn't contain hydrocarbons• Chlorine-free and biodegradable• Made in GermanyCode size 1-2 3+B20001 1LT $42.90ea $38.60eaB20005 5LT $169.00ea $152.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE81

CAPITAL EQUIPMENTFLEX TOOLSCOUNTERSINKS & DEBURRER 900• With Weldon shank – 19mm• Another use for your magnetic base drillCode Dia 1-2 3+CSDB25 25mm $88.00ea $72.90eaCSDB40 40mm $164.00ea $155.90eaHEX SHANK TOOL HOLDER• 13mm Hex Shank to fit in radial arm drill• 20mm drilling depth• 19mm Weldon shank female fittingNOTE: Not for hand-held use. Use in eitherfloor mounted or magnetic base drill.Code 1-2 3+AS13 $89.00ea $78.90eaNO.2 & 3 MT• Internal lubrication for better cutter life• Suitable for 50mm depth of cut cutters• Convert your radial drill to a core drillCode 1-2 3+No2 18003 $295.00ea $268.90eaNo3 18025 $325.00ea $295.90eaQUICK-CHANGE TOOL HOLDER– ROTA QUICK• No. 2 & 3 morse taper• Internal lubrication for longer cutter lifeCode 1-2 3+No2 18650 $345.00ea $305.90eaNo3 18651 $360.00ea $325.90ea13MM CHUCKS• Key and keyless varieties available• Comes with Weldon adaptorKey Chuck with adaptorCode 1-2 3+18105 $88.00ea $78.90eaKeyless Chuck with adaptorCode 1-2 3+18105KL $98.00ea $80.90eaWeldon Adaptor 1/2” x 20thdCode 1-2 3+18105a $40.00ea $37.90eaEJECTOR PINSTO SUIT 25mm CUTTERSCode Dia 1-2 3+1925500 7.1mm $11.00ea $9.90ea1926500 6.0mm $11.00ea $9.90ea2001500 8.0mm $11.00ea $9.90eaTO SUIT 50mm CUTTERSCode Dia 1-2 3+1950500 6.0mm $14.00ea $12.90ea2001501 8.0mm $14.00ea $12.90eaCOOLANT TANK• 500ml capacity• With tap, suits all Alfra modelsCode 1-2 3+18104 $75.00ea $68.90eaFLEX - Another word for innovationNEW FLEX TIGERCLAWThe middle joint can be pivoted 180˚ at the press of a button while the front joint can be rotated360˚ in 12 stages, both during sawing.• Variable speed from 0 to 2900rpm• 29mm orbital stroke• Autostop brushes• Quick release blade• Rubber front-housing• Carry-case includedCode 1 2+SKL2903VV $780.00ea $755.00eaL1710 FRA• 1400W motor• 125mm wheel• swivel guardCode 1-2 3+L1710FRA $319.00ea $298.00eaX1107 VE SANDER• 710W motor• Variable speed• 8.8mm orbit for fast stockremovalCode 1-2 3+X1107VE $698.00ea $570.00eaLD 2806 VC• 2800 watt• Metal housing for heat dispursment• 230mm wheel• Quick release guardCode 1 2+LD2806VC $769.00ea $715.00eaLK 604 7” HEAVY DUTY SANDER• 1200W motor• 4000rpm• High torque outputCode 1-2 3+LK604 $495.00ea $450.00eaIDEAL FOR CONCRETEGRINDING82 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

CONDOR - MODEL SPG2500 5.5HPGENERATOR• Rated output 2.5kva• 9 Amp, 230VAC, 50Hz/12VOC, 8.3Amp• 15L fuel tank• Recoil start• L595 x W425 x H435mm• 39kgCode 1 2+SPG2500 $950.00ea $895.00eaCONDOR - MODEL SPG6500 13.0HPGENERATOR• Rated output 6.25kva• 230VAC, 50Hz/12VOC, 8.3Amp• 25L fuel tank• L685 x W515 x H535mmRecoil start optionCode 1 2+SPG6500 $1890.00ea $1795.00eaElectric start optionCode 1 2+SPG6500ES $1995.00ea $1899.00eaCONDOR - MODEL KG3000 5.5HP GENERATORHONDA POWERED• Rated output:2.0kva/2.4kva max• 230VAC, 50Hz/12VDC, 8.3A• 11 litre fuel tank• L545 x W414 x H418mm• 40kgCode 1 2+KG3000 $1678.00ea $1498.00eaCAPITAL EQUIPMENTGENERATORSCONDOR - MODEL KG6500E 11.0HPGENERATORHONDA POWERED• Rated output 4.4kva/5.5kva max• 230VAC, 50Hz/12VDC, 8.3A• 17 litre fuel tank• L565 x W420 x H533mm• 76kg• Electric start - battery not includedCode 1 2+KG6500E $3499.00ea $3250.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE83

CONDOR EASY START 1” WATER PUMP• 22.2 c.c - 2 stroke engine• 110 litres per min• 33 metre head• Weighs only 7.3 kg• Self priming• Includes hose couplingCode 1 2+10-1365 $579.00ea $535.00eaCAPITAL EQUIPMENTPUMPSCONDOR EASY START 2” WATER PUMP• 4 h.p - 4 stroke engine• 500 litres per min• 28 metre head• Self priming to 8 metres• Includes roll frame,hose coupling & suctionstrainer• L500 x W380 x H420mmCode 1 2+10-1100 $620.00ea $599.00eaCONDOR EAST START 3” WATER PUMP• 5.5 h.p - 4 stoke engine• 1000 litres per min• 30 metre head• Self priming to 8 metres• Includes roll frame,hose coupling & suctionstrainer• L500 x W380 x H420mmCode 1 2+10-1101 $695.00ea $660.00eaDRUM PUMP• 22 litres per min• 5 metre head• Cast iron construction• Weighs 5.7kgCode 1 2+10-1251 $120.00ea $110.00eaSTAINLESS STEEL SUBMERSIBLE PUMPS• 230 volt• Includes float switch• 10 metre cableModel 10-1256• 550 watt motor• 158 litres per min• 8 metre head• 1” & 1-1/4” outletCode 1 2+10-1256 $250.00ea $210.00eaModel 10-1258• 1100 watt motor• Maximum soft solid size-35mm• 1”,1-1/4”,1-1/2” outlet• 9.5m head• 225 lpmCode 1 2+10-1258 $350.00ea $310.00eaSEE PAGE 63 FOR HOSING84 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

CAPITAL EQUIPMENTWATER BLASTERSWATERBLASTERSHonda Powered• 2000 PSI, 11LPM• Brass head pump• 3400rpm hi-speed pump• Detergent injection• Adjustable pressure at pump and pistol• 10m hose standard• Wire-braid HD hose• 5.5hpCode 1 2+11.2052 $1860.00ea $1758.00eaHonda Powered• 2500 PSI, 11.4LPM• Brass head pump• 3400rpm hi-speed pump• Detergent injection• Adjustable pressure at pump and pistol• 10m hose standard• Wire-braid HD hose• 6.5hpCode 1 2+11.2096 $2295.00ea $2198.00eaHonda Powered• 2500 PSI, 11.4LPM• 3400rpm hi-speed pump• Detergent injection• Adjustable pressure at pump and pistol• 10m hose standard• Wire-braid HD hose• 6.5hpCode 1 2+11.2096 $2295.00ea $2198.00eaENQUIRE ABOUT HOSE EXTENSIONSE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE85

PORTOMIX HIPPO -MIX WITH THE BESTThe design of the new Portamix Hippo gives the contractor the following benefits• Very little set-up time• Lightweight and compact size means one person can transport and operate it• No material wastage, very easy to clean• Mobile – you can mix and manoeuvre around room or siteThe Hippo will mix up to 130kg or 70 litres of material in a batch. Once mixed, thematerial can be dispensed with ease.The “F” series version, designed for floor coatings, allows the contractor to dispensethe material directly on to the floor, moving the Hippo around with ease to spread asdispensing.The “X” series stands higher off the ground and material can be poured into bucketsplaced under the pouring spoutHAND HELD MIXER• 1100 watts• 0-450 rpm• Tube frame for motor protection• Made in Germany• 140mm paddle includedCode 1-4 5+EM125 $595.00ea $550.00eaCAPITAL EQUIPMENTCOMPOUND MIXERSM14 THREAD PADDLES TO SUITEM125S - 700MM LONG• Thin paints & liquids• 120mm diaCode 1-4 5+TF120 $55.00ea $49.50ea• Plasters,motars & concrete• 140mm diaCode 1-4 5+TW140 $76.00ea $68.00ea• Paint, grout & bitumen coatings• 120mm diaCode 1-4 5+TR120 $55.00ea $49.00ea“F” SERIESCode 1 2+FSV $2595.00ea $2400.00ea“X” SERIESCode 1 2+XSV $2595.00ea $2400.00ea• Plasters,resins & epoxys• 160mm dia• Mixers plaster bottom upCode 1-4 5+TM140 $76.00ea $68.00ea• Mixers plaster top downCode 1-4 5+TM140neg $83.00ea $74.00ea10MM PLAIN SHAFT PADDLES FORDRILLS• Thin paints & liquids• 400mm long - 80mm diaCode 1-4 5+PKR-80 $38.00ea $34.00ea• Paints,thin liquids and adhesives• Best at high speeds• 500mm long - 90mm diaCode 1-4 5+PL90 $38.00ea $34.00ea• Paints,spreading compounds,bitumencoatings & grout• 590mm long - 120mm diaCode 1-4 5+PR120S $50.00ea $45.00ea• Plaster,pastes & granules• 590mm long - 120mm diaCode 1-4 5+PM120S $50.00ea $45.00ea• Adjustable fins to suit quantity• Ideal for plaster & motar• 590mm long - 120mm diaCode 1-4 5+MJ130 $40.00ea $36.00ea86 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

WYCO - Petrol- EZ Vibe- Freedom on siteWYCO SQUARE HEAD EZ VIBE• Comes equipped with a 35cc air-cooled 4-cycle Robin engine• 1.6 hp, .65 litre fuel capacity• The shaft length is 1.5mt and comes with a 35mm square head.• The shaft is protected from excessive wear and does not kink• Uses a diaphragm carburetor• Lightweight at 10.5 kg• This portable unit includes a safety harness• Adjustable speedCode 1 2+WYCOEZV $2495.00ea $2250.00eaWYCOCONCRETE VIBRATORS- a Solid ReputationCycolac (lexan) end cap protects switch Optional quick - disconnectRadial fan - motor runs cooler, lasts longerHeavy duty protective frameConvenient filter locationHeavy - duty aluminium motor housingResilient rubber frame support to absorb impactWYCO’S UNIQUE CONCRETE VIBRATOR DELIVERS BIG BENEFITS• Significant benefits claimed for a range of square-head concretevibrators result in faster operation, lower cost and better finishedconcrete and with fewer air voids giving higher strength.• The key to the unit’s efficiency is its patented square-profile headwhich provides over 25% more surface area than a round head.• To improve cooling and minimize entrapment of foreign particles,Wyco have designed their electric motors very open. The entireunits are easily cleaned after each use by hosing down, withoutdamage to the electric components.• Powerpac has the biggest range of vibrators ex-stock backed bycomprehensive spares in the country.SELECT THE MOTOR, FLEXIBLE SHAFT LENGTH AND HEADTO SUIT YOUR NEEDSMOTORCode Power 1 2+902a 2hp $1235.00ea $1111.00ea903 3hp $1385.00ea $1247.00eaSHAFT/DRIVECode Length 1 2+WYCOSD1.5 1.5m $315.00ea $284.00eaWYCOSD2.1 2.1m $380.00ea $342.00eaWYCOSD3.0 3.0m $480.00ea $432.00eaWYCOSD4.2 4.2m $620.00ea $558.00eaWYCOSD6.0 6.0m $820.00ea $738.00eaCAPITAL EQUIPMENTCONCRETE VIBRATORSHEAD• 20 - 50% faster and more effective than round heads• Up to 27% more surface area• Faster concrete consolidation• More effective energy transmissionCode Size 1 2+750-D 19mm $295.00ea $266.00ea750-EH 25mm $315.00ea $284.00ea750- FI 35mm $715.00ea $644.00ea750-GI 44mm $745.00ea $670.00ea750- LI 50mm $825.00ea $748.00ea750-MI 56mm $930.00ea $837.00ea750- SBI 63mm $445.00ea $400.00ea750-D19mm750-EH25mm750-FI35mm750-GI44mm750-LI50mm750-MI56mmSBIDesigned for use in limited-depth pours, such as tilt-up walls.At only 4” long the entire head can be immersed in the concrete formore efficient consolidation.E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE87

FUJI ANGLE GRINDERSCOMPACT Fuji angle grinders are truly heavy duty, built to last in themost demanding applications while delivering the following benefits:Power, low noise, ergonomics, hardened steel motor parts, air cooledgearboxModel Wheel Size 1 2+FA4C-IF 4”/100mm $599.00ea $540.00eaFA5E-2VF 5”/125mm $684.00ea $640.00eaFA7E-2/3VF 7”/180mm $868.00ea $840.00eaFA9C-2 9”/230mm $1134.00ea $940.00eaFUJI CHIPPERS• Ideal for light chipping, paint and rust removal• Very heavy-duty steel body• Compact – 182mm O.A.L.• Chisels ranging from 100-300mm in lengthModel 1 2+FCH20F $310.00ea $280.00eaCAPITAL EQUIPMENTAIR TOOLS• Larger version of FCH-20F• Accepts same chisels• Better suited for concrete work, also used for removal of welding fluxModel 1 2+FCH25IF $405.00ea $380.00eaFUJI DRILLS• High torque motor• 2800rpm• 10mm diameter chuck• The very best for production situations• Sand-cast alloy housing with steel gearbox• Quiet running due to inbuilt rear exhaust with silencerModel 1 2+FRD6PX3 $445.00ea $411.00ea• The most powerful drill of its size• Very high torque• 600rpm• 13mm diameter chuckModel 1 2+FRD6PX7 $648.00ea $599.00ea• Ultimate engineers drill• 16mm diameter chuck• Very powerful• 800rpm• CompactModel 1 2+FRD16Z$1140.00ea $1055.00eaFUJI VERTICAL GRINDERS• 125mm, 178mm, 230mm• Very powerful due to direct drive shaft• Speed control governor maintains rpm under loadtModel Wheel Size 1 2+FV 5-4M 5”/125mm $792.00ea $750.00eaFV 7-4M 7”/178mm $846.00ea $805.00eaFV 9BH-1M 9”/230mm $1260.00ea $1120.00eaAPT CLAY AND TRENCH DIGGER• Perfect for digging light to medium packed soil, tunnelling aroundexisting foundations and light demolition work• Inside trigger for safety and control• Flapper valve design allows for dirty air• 7/8” x 3 1/ 4“ shank• Requires 21cfm @ 90psi• Weight: 16.9kg• Length: 790mmModel 1 2+APT125$1930.00ea $1880.00eaSCALER• Needle scaler attachment - 19 x 3mm Ø needles• Chisel attachments• Total steel construction• Heavy DutyModel 1 2+M317 $495.00ea $450.00ea88 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

APT ROCK DRILLSThe APT models 109 and 115 are lightweight tools used for drilling holesfor anchor bolts and dowel-hole drilling. Both have a “rotation stop”feature to convert them to light-chipping tools.APT 109• 45mm diameter hole capacity• 300mm drilling depth• 250 and 450mm chisels stocked• Requires 21cfm @ 90psi• Weight: 4.1kg• Silencer suppliedCode 1 2+APT109 $1495.00ea $1340.00eaAPT 115• 7/ 8” x 3 1/ 4” shank• Use with either “button” drills or integral steels• Built-in oiler• Chisels and points stocked• Requires 36cfm @ 90psi• Weight: 8.7kg• Silencer suppliedCode 1 2+APT115 $2610.00ea $2500.00eaAPT137• 4-speed• 30lb classCode 1 2+APT137 $3197.00ea $2875.00eaAPT155• 3-speed• 60lb classCode 1 2+APT155 $3550.00ea $3195.00eaCAPITAL EQUIPMENTAIR TOOLSAPT 180 -90LB• High performance, most powerful breaker from APT• Suited for heavy demolition and concrete breaking• Shank size 1 1 /4” x 6”• Requires 75 to 80cfm @ 90psi• Muffler includedCode 1 2+APT180-90 $2380.00ea $2200.00eaAPT1133• Designed to cut metal rivets off truck chassis, pylons, bridges etc.• Rivets are removed in seconds thanks to the 11" stroke.• Weighs 15 kg• Requires 52 cfm @ 90psiCode 1 2+APT1133 $2760.00ea $2550.00ea441-03 1” Chisel $118.00ea $99.00ea446-03 1/2” Punch $118.00ea $99.00ea447-03 5/8” Punch $118.00ea $99.00eaAIR MANIFOLDS• The units are compact for easy transport and working in confinedspaces.• Mounting brackets for bolting to skids or other surfaces.• Manifolds can be used in tandem for extended capacity.• Can be fitted with 1/4, 3/8, and 1/2 couplings• Supplied with pressure guage and drain tapTX-3AMF• 4 Outlets• Inlet size - 1"• Weight 10.3Kgs• Max working pressure 200 psi• Dimensions 590mm(L) x 250mm(H) x 360mm(W)Code 1 2+TX-3AMF $1595.00ea $1480.00eaTX-2AMF• 8 Outlets• Inlet size - 2"• Weight 28.6KgsCode 1 2+TX-2AMF $1750.00ea $1600.00eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE89

TRELAWNY SCALERSSurface Preparation TechnologyTRELAWNY NEEDLE SCALERS2 BPG – Pistol Grip• 19 x 3mm needles• Chisel holder availableCode 1-2 3+2BPG $630.00ea $595.00ea2mm, 3mm, 4mm diameter needlesavailable ex stock3 BPG – Pistol Grip• 28 x 3mm needles• Chisel holder availableCode 1-2 3+3BPG $640.00ea $599.00eaCAPITAL EQUIPMENTSCALERSTRELAWNY LONG REACH SCALERSLR4 – 4FT, LR5 – 5FT, LR6 – 6FT• 4ft, 5ft and 6ft length options• Chisels available: 50 and 100mm• Scrapers available: 200 and 300mm• Needle scaler attachmentavailable ex-stock• Air consumption – 12cfm @ 90psiCode Length 1-2 3+LR4 1.2m $1150.00ea $1035.00eaLR5 1.5m $1150.00ea $1035.00eaLR6 1.8m $1150.00ea $1035.00eaAttachments for Trelawny Long Reach ScalersCode Description 1-2 3+705-1102 50mm chisel $118.00ea $98.00ea705-1106 100mm chisel $118.00ea $98.00ea4153532 Needle Scaler $449.00ea $405.00ea4313908 250mm Scraper $230.00ea $205.00ea4313912 300mm Scraper $310.00ea $280.00eaTRELAWNY SCALING HAMMERSreplaceable scaling heads• Quick changes in the field or workshop – less downtimeand lower maintenance costs• Tungsten-carbide cruciform and bushhammer heads stay sharper longerNylon brush seals• Cleans pistons on each and every stroke• Improves performance and extends tool lifeSingle screw-cap design• Simplifies piston replacementAir inlet/side handle port• Converts to inline configuration for evenmore versatility• Side handle mounts easily for comfortable grip andstabilityCode Description 1-2 3+SH 1H single head scaler $570.00ea $535.00eaSH 3H triple head scaler $1190.00ea $1009.00ea90 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

BREAKER POINTS AND CHISELS• To suit APT, CP, THOR, IR• 7 /8 x 3 1 /4” suits APT 125Code 1 2+BPC78 $24.30ea $22.90ea• 1 x 4 1 /4 ” suits APT 140Code 1 2+BPC1 $26.90ea $24.90ea• 1 1 /4 x 6” suits APT 160, 180Code 1 2+BPC14 $44.00ea $36.90eaINTERGRAL DRILL BITS TO SUITAPT 109, CP9• Hollow core for dust removal• 13-35mm ø available - 330mm drillingdepthCode/ømm 1 2+IDB/13mm $105.00ea $95.90eaIDB/16mm $109.00ea $98.10eaIDB/19mm $116.00ea $104.40eaIDB/22mm $120.00ea $108.00eaIDB/25mm $125.00ea $112.50eaIDB/28mm $135.00ea $121.50eaIDB/32mm $145.00ea $130.50eaIDB/35mm $155.00ea $139.50ea• Chisels & Points 250mm O.A.LCode 1 2+IDB250 $45.00ea $35.90eaCLAW COUPLINGS – TYPE A• 1/ 2 thd suits APT 140, 160• 3 /4 thd suits APT 18Code/tail size 1 2+CC13/13mm $11.50ea $9.90eaCC19/19mm $11.50ea $9.90eaGENUINE APT SWIVEL JOINT – 3388• Hardened steel• Top quality• 7 /8 x 24thd to 1 /2 hose to suit APT 650Series chippersCode 1 2+APT3388 $74.50ea $68.50eaAPT INLINE OILERSAPT oilers are heavy-duty inline lubricatorsmade to be installed within 10 to 12ft of thetool. Tough and rugged, they are designedto withstand being dragged behind the airtool. A common setup will incorporate theoiler at the end of a short length of whiphose.Code Cap. Hose Barb psi 1 2+pipe size17755 3.7fl oz 3/4” NPT 260 $110.00ea $98.50ea17756 11.0fl oz 3/4” NPT 300 $125.00ea $108.50ea17757 16.0fl oz 1” NPT 250 $170.00ea $156.50ea10MM PVC AIR HOSE• Complete with Aro fittingsCode/Length 1-4 5+PVC/20Mtrs $48.00ea $39.90eaPVC30Mtrs $66.00ea $55.90eaAIR TOOL OIL-AIR FORCE EP22• High grade,suitable for inline oilers andlubricators etc• Light and easy flowing ensures fullpeneration of working parts• Made in EnglandCode/Qty 1-4 5+EP22/1Ltr $16.00ea $13.60eaEP22/5Ltr $55.00ea $46.75eaCAPITAL EQUIPMENTAIR TOOL ACCESSORIESAPT AIR HOSE• 13mm (1/2") diameter to suit apt 109,115, 650 series, 1133• Vinyl tube/rubber covered for strengthand flexibility• Lightweight – approx 8kg per 30m• Working pressure 200 to 350psi• Medium to high oil resistance• Made in USACode 1-10m 11+mAPTAH $7.00/m $6.50/mType A Coupling Set with ClampsCode 1 2+TYPACL $44.00ea $36.50eaCOMPLETE PACKAGE30m coil Type A Claw CouplingsCode 1 2+APT30P $254.00ea $236.50eaAPT LAYFLAT AIR HOSES• 19mm (3/4") diameter to suit apt 125,131, 140, 160, 180• Nitron rubber• Reinforced for strength and durability• Ribbed – resistant to abrasion• Lightweight – approx 6kg per 30m• Working pressure to 360psi• Medium oil resistance• Weather resistantCode 1-10m 11+mAPTLF $14.40/m $12.50/mType A Coupling Set with ClampsCode 1 2+TYPACL $44.00ea $36.50eaCOMPLETE PACKAGE30m coil Type A Claw CouplingsCode 1 2+APTLF30P $476.00ea $436.50eaAIR FITTINGS1/4” Tail pieceCode/size 1-9 10+A109/6mm $2.20ea $1.98eaA110/8mm $2.20ea $1.98eaA111/10mm $2.20ea $1.98eaHose insertsCode/size 1-9 10+A3946/6mm $2.20ea $1.98eaA3947/8mm $2.20ea $1.98eaA3948/10mm $2.20ea $1.98eaHose Clamps• 12-20mm range• Stainless steelCode 1-9 10+A2530 $2.20ea $1.98eaCouplings• Quick release coupling interchangeable with ARO,Rectus,PCL• BSP thdCode 1-9 10+A210 $12.00ea $10.80eaFemale ConnectorCode 1-9 10+A2609 $2.20ea $1.98eaMale ConnectorCode/size 1-9 10+A2607 1/8” P.T $2.20ea $1.98eaA2608 1/4” P.T $2.20ea $1.98eaA2700 3/8” P.T $2.20ea $1.98eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE91

VITAL CHAIN BLOCKS• Heavy duty Chain Blocks suitable for many applications in the industrial, rural, constructionand mining industries• 3m lift has 2m drop hand chain• 6m lift has 5m drop hand chainCode Lift 3m 6m1-2 3+ 1-2 3+VLO5 0.5 tonne $275.00ea $254.00ea $345.00ea $319.00eaVL10 1.0 tonne $310.00ea $287.00ea $385.00ea $356.00eaVL15 1.5 tonne $405.00ea $375.00ea $510.00ea $470.00eaVL20 2.0 tonne $510.00ea $470.00ea $625.00ea $578.00eaVL30 3.0 tonne $650.00ea $600.00ea $825.00ea $763.00eaVL50 5.0 tonne $1215.00ea $1123.00ea $1490.00ea $1380.00eaVL75 7.5 tonne $2075.00ea $1920.00ea $2425.00ea $2243.00eaVH90 10 tonne $2745.00ea $2540.00ea $3210.00ea $2970.00eaVH92 15 tonne $6590.00ea $6100.00ea $7305.00ea $6760.00eaVH93 20 tonne $9150.00ea $8465.00ea $10080.00ea $9350.00eaCAPITAL EQUIPMENTHOISTSPACIFIC CHAIN BLOCKS• The economical alternative that features sturdy constructionand complies with strict Australian standards• 3m lift has 2m drop hand chain• 6m lift has 5m drop hand chainCode Lift 3m 6m1-2 3+ 1-2 3+CB25 0.25 tonne $155.00ea $143.00ea $195.00ea $180.00eaCB05 0.50 tonne $175.00ea $162.00ea $245.00ea $226.00eaCB1 1.0 tonne $210.00ea $194.00ea $275.00ea $254.00eaCB15 1.5 tonne $285.00ea $263.00ea $370.00ea $342.00eaCB2 2.0 tonne $335.00ea $310.00ea $415.00ea $383.00eaCB3 3.0 tonne $415.00ea $383.00ea $570.00ea $527.00eaCB5 5.0 tonne $650.00ea $600.00ea $850.00ea $786.00eaCB10 10 tonne $1350.00ea $1250.00ea $1720.00ea $1590.00eaVITAL LEVER BLOCK• A range of cost effective Lever Blocks suitable for most lifting and tensioning operationsCode Lift HEIGHT 1-2 3+LB25 0.25 tonne 1.0 m $150.00ea $138.00eaLB05 0.5 tonne 1.5 m $190.00ea $175.00eaLB75 0.75 tonne 1.5 m $265.00ea $245.00eaLB1.5 1.5 tonne 1.5 m $330.00ea $305.00eaLB3.0 3.0 tonne 1.5 m $540.00ea $499.00eaLB6.0 6. 0 tonne 1.5 m $940.00ea $870.00eaLB9.0 9.0 tonne 1.5 m $1350.00ea $1248.00eaPACIFIC LEVER BLOCKS• An extremely sturdy, highly versatile tool suitable for a multitude of lifting, pulling, tensioningand securing applicationsCode Lift HEIGHT 1-2 3+NR03 0.25 tonne 1.5 m $225.00.ea $208.00eaNR05 0.50 tonne 1.5 m $260.00.ea $240.00eaNR08 0.75 tonne 1.5 m $375.00ea $346.00eaNR15 1.5 tonne 1.5 m $475.00ea $439.00eaNR30 3.0 tonne 1.5 m $685.00ea $633.00eaNR60 6.0 tonne 1.5 m $1085.00ea $1005.00eaNR90 9.0 tonne 1.5 m $2075.00ea $1920.00eaPACIFIC COMPACT ELECTRIC ROPE HOISTS• Designed for use on building sites also suitable for a wide range of applicationsin warehouses, storage areas, factories, etc.• Single phase, 240VCode Lift HEIGHT 1-2 3+CWS-80 80Kg 31 m $985.00ea $910.00eaCWS-160 160Kg 40 m $1150.00ea $1065.00eaCWS-230 230Kg 24 m $1295.00ea $1195.00eaCRH0720 Trolley mount bracket 1-2 3+suits all models $160.00ea $148.00eaCRH0710 Swivel arm assembly 1-2 3+suits all models $135.00ea $125.00ea180˚Rotation 180˚897mm92 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

WARNING!!!DO NOT TRY THIS WITH ANY OTHER LADDERLOAD RATED AT 180KGS - THE TOUGHEST YET -10 YEAR GUARANTEEWARTHOG STEP/EXTENSION LADDERS - NZ MADE5 Step - 1.5m extending to 2.7mCode 1 2-4 5+WHSE05 $290.00ea $274.00ea $261.00ea6 Step - 1.8m extending to 3.3mCode 1 2-4 5+WHSE06 $329.00ea $309.00ea $295.00ea7 Step - 2.1m extending to 3.9mCode 1 2-4 5+WHSE07 $371.00ea $349.00ea $333.00ea8 Step - 2.4m extending to 4.5mCode 1 2-4 5+WHSE08 $415.00ea $391.00ea $372.00ea9 Step - 2.7m extending to 5.1mCode 1 2-4 5+WHSE09 $456.00ea $429.00ea $409.00ea10 Step - 3.0m extending to 5.7mCode 1 2-4 5+WHSE10 $499.00ea $470.00ea $448.00eaCAPITAL EQUIPMENTLADDERS / TRESTLESTRESTLES• Heavy duty folding trestle• Made in New Zealand to our specifications• Light & compact for ease of use & storage• Zinc coated legs for rust protection• Simple locking legs for total saftey• Quick latch for folding up legs• Height adjustable feet option on all modelsCode Height(mm) Length(mm) 1-2 3-4 5+WQLS 600 700 $105.00ea $94.50ea $85.00eaWQLL 700 900 $110.00ea $99.00ea $89.10eaWQLLL 900 900 $134.00ea $120.60ea $108.50eaWQLT 500 1200 $128.00ea $115.20ea $103.70eaHeight adjustable swivelling feet set• 2 per packetCode 1-2 3-4 5+OSF4 $70.00ea $63.00ea $56.70eaE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE93

PREPMASTER PME-180Single Disc Edge GrinderThe PME-180 is designed from the ground up as an edgegrinder. It is rugged and can grind along walls etc. effectivelywithout the backache and fatigue of using 9” Grinders.It uses either the standard 7” blade or the 10” blade. Thegrinder tech convertible shroud allows you to grind normallyor against edges.Also features a quiet 2.2kw 240v Electric Motor.Edge grinding is now an easy job, and is an excellent surfacegrinder for small jobs and confined areas.STOCKED ITEMCodePricePME-180 P.O.AFINANCE AVAILABLECAPITAL EQUIPMENTCONCRETE GRINDERSSTOCKED ITEMCodePriceSAT-480 P.O.ASATELLITE 480, 760-6, 760-12SPECIAL FEATURES• Super rugged reduction transmission- 5 year warranty• Flexible couplings delivers gouge & ridge freegrinding, and virtually maintenance free - 2 yearswarranty• Easy to use - low physical effort and easy onoperator• Highest production is possible because of bestcombination of weight, power and rotational speed.(Subject to correct selection of diamond tooling)• Quick Disk change-over no tools!• You can change discs/plugs with simple tools, orchange to polishing pads in 1 or 2 minutes• Has fantastic ability to flatten out ripples and ridges- you’ll deliver exceptional flatness• Can go through most standard doorways• Variable speed options availableCodeSAT 760-6PriceP.O.AMACHINE TOOLING• Magnetic quick change disc holders• Diamond Plugs grits 16 to 3000#• Strip Plugs - slicing membranes• Polishing Pads - 50# to 5000#• Satellite Discs• All diamonds available soft - medium - hard matrix• Turbo Plugs• Wire BrushesACCESSORIESCodeSAT 760-6PriceP.O.A94 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

DELFIN INDUSTRIAL VACUUM CLEANERS- MADE IN ITALYMISTRAL 352DSFor dust and solid materialFINANCE AVAILABLED/G2For dust, liquid and solid materialSTOCKED ITEMCodePriceMISTRAL 352 P.O.ASTOCKED ITEMCodePriceDG2P.O.ACAPITAL EQUIPMENTCOMMERCIAL VACUUM CLEANERSD/M3For dust, liquid and solid materialSTOCKED ITEMCodePriceDM3P.O.AD/M40SGAFor dust and solid materialSTOCKED ITEMCodePriceDM40SGA P.O.AFOR MORE DETAILSASK FOR BROCHUREE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE95

INDEXINDEXAAdhesives & sealants 39, 40Alfra drills / cutters 80, 81Air drill 78Air manifolds 89Air tools 88, 89Air tool connectors 91Air hose 91Air tool oil 91Auger bits 9BBacking pads 47, 48Bar 15Barrier tape 6, 16Bar clamps 10Batteries 32Beacons 33Bits 9Black plastic 7Bolt cutters 17Breaker chisels 91Breaker points 91Boots 36Brick bolster 24Brick carrier 24Brick jointer 24Brick layers tools 24Broom 28Brush 25,45Bucket 25Builders props 7Bull float 29,52CCam toppers 26Carpenters square 10Caulking gun 40Chalk 41Chalk line reels 14Chalk refills 14Chain 65Chain block 92Chippers 88Chisels 10Chisel set 10Chucks 82Cleaning towels 40Club hammer 15Coach bolts 38Coffee 37Collated nails 38Collated screws 38Cordless drill 78Combination square 10Compound sprayers 62Concrete additives 62Concrete bar chairs,packers & caps 61Concrete giraffe 70Concrete grinders 94Concrete testing hammer 74Concrete vibrator 87Compound mixers 86Core drill 59Core drills 58Core drill sets 59Core rollers 26Corner bead tool 21Corner roller 21Corner tool 19Couplings 91Crayons 41Cups 37Cup stones 97Cut-off discs 46Cutting fluid 81DDemolition bars 15Demolition hammer 15Diamond core drilling 58,59Diamond cutting blades 53,54,55,56Diamond grinding wheels 57Digital levels 30Digital measuring 73Digital protractors 30Disposable cups 37Disposable overalls 36Distemper brush 25Double sided tape 16Drop covers 42Drug test kit 43Duct tape 7, 16Dust barrier 44Dust extractor 67Dust masks 35Dustpan 28Dustpan & brush 28Dutch pins 24EEarplugs 36Earplug dispenser 36Ear muffs 36Electrical protection 31Electrical tape 16Electritions bolster 24Engineers roll 49Extension leads 32FFein supercut 75,Fein Multimaster 77Fence hire 5Fence post driver 6Fence post remover 6Fencing 5Fibre discs 48, 49First aid kit 43Flashing hazard lamps 33Float 22, 23,24Floor scraper 13Folding rule 10Framming hammer 15GGas trolley 66Generator 83Globes 33Gloves 35Grade rods 72Grinders 79, 82, 88Grinding disc 47Grinding discs 46Grubber 18Gumboots 36Gun 40HHacksaw 13Hacksaw blades 13Halogen lamp 32Hammer 15Hammer tacker 11Handsaws 9Handsander 50Hand truck 66Hard hats 34Hawk 20,23,52Hazard lamps 33Hi-Vis mesh 6Hi-Vis vests 36High tensile wire 6Hoists 92Hooks 65Hose 63Hose clamps 91Hose fittings 63Hose reel 63Hydraulic trolley 66IInline oilers 91Instant coffee 37Internal finishing tool 19JJigsaw blades 8Joiner brackets 5Joint knives 19KKneeling board 24knife blades 13Knives 13LLadders 93Lamps 32Laser glasses 72Laser level 30, 71Lay flat hose 62Levels 29Lever blocks 92Light bars 33Lifeguard 31Line block 24Line pins 24MMarker 41Marking paint 41Masking tape 16Masonary brush 25Masonary cup stones 47Masonary drilling 60Measuring wheel 12Mesh 6Metal drilling 80Milo 37Mitre boxes 9Mixers 86Mop 28Moisture meter 74Mortar smoothing tool 24Mud pan 20Multimaster 77NNail & tool bag 11Nail puller 15Nails 38Nippers 17Nitrile gloves 35Notched squeegees 27OOutdoor repair tape 18Overalls 36PPaddles 86Paint 41Paint brushes 42Paint roller 42Panel carrier 20Pencil 41Pencil sharpner 41Pick axe 18Pick mattock 18Plasterboard hammer 15Plastering tools 19, 20Plaster scoop 23Plastic buckets 25Plastic float 23Pneumatic hacksaw 78Portomix 86Post driver 6Power boards 32Polythene film 44Protractors 30Pumps 84RRags 28,42Rake 18Rcd saftey powerboards 31, 32Reo bender 17Repair tape 16Resin fibre discs 48Rings 6Ring fastner gun 6Rock drills 89Rod cutter bender 17Roller racker 24Rubber buckets 25Rubber fence feet 5Rubbing blocks 47Rule 10SSabresaw blades 8Safety caps 61Safety cables 31Saftey glasses 34Saftey vest 36Sanders 82Sanding foams 50Sanding sheets 50Saw 9Saw blades 8Scaffold netting 7Scalers 90Scraper 8Screed 29Screws 38Scrubbing brush 25Sealant gun 40Security fencing 5Sharpening 81Shovel 18Shrouds 69Sledge hammer 15Slings 65Small tool 20Snips 13Spade 18Spade bits 9Spiked rollers 26Spiked shoes 27Spirit levels 29,30Splatter machine 23Sponge 24Sponge float 22Spray 41Sprinkler 63Squares 10Squeegees 27Staples 11Staple gun 11Staple puller 11Star grip clip 6Steel fence posts 6Stockinette 42Stringline 14Stud finder 74Sun block 43Sugar 37Support posts 5Swing top bin 37TTacker 11Tape 12, 18Tape dispenser 21Tape measure 12Taping box 21Taping knives 20Tarps 7Tea bags 37Temporary fencing 5Threaded rod 38Tie downs 64Tie wire puller 17Tie wire reel 17Tin snips 13Toilet paper 37Toilet tidy 37Tool bag 11Torch 32Towelling 28Tow strap 64Traffic wands 33Trestles 93Trowel 20,23,24,51,52T squares 10Tungsten blades 8Twitches 65UUltra mesh 6VVacuum bags 68Vacuum cleaner 67, 95Vests 36Vibrator heads 87WWarratahs 6Warratah driver 6Warratah remover 6Waste tidy 37Water blaster 85Wheel barrow 66White suga 37Wire 6Wire brushes 45Wire cup brushes 45Wire resurfacer 26Wooden stirrers 37ZZip Wall 4496 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

TERMS AND CONDITIONSE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE97

ON-SITE ADVANTAGES / FREIGHTWIDE RANGE OF PRODUCTSONSITE is your ‘one stop site shop’ with everything you need for your requirementson the construction and road site. This saves you time and money - youcan order it all from one supplier. If it not in our catalogue - inquire and we willsource it for you.BUY DIRECT FROM THE IMPORTERBy importing and local sourcing of our own brands means you can buy direct atgood rates.FAMILY BUSINESSONSITE is a family owned and operated business which means you speak tosomeone who cares.GOOD STOCKSAt ONSITE we keep large quantities of stock so you can rely on us to have whatyou need when you want it.FAST DELIVERYWith the ONSITE express delivery service orders are normally delivered thenext working day to main centres NZ wide. If your need is urgent we offer a 1 hrdelivery service in the Greater Wellington Area. Our sales staff will be pleased tolet you know the availability and cost in each case.LONG HOURSYou can phone or pickup products anytime between 7.00am and 5.00pm Mondayto FridayQUALITY PRODUCTSOur product range is widely sourced to provide you with the best value andquality. Our ongoing research means we are adding new and improved items tothe range all the time. New product suggestions are welcome and we are alwaysready to help source difficult or unusual products.SPECIALIST ADVICEYou can rely on the ONSITE team of product specialists to advise you on what isthe most appropriate product for your problem. If we don’t have the right productwe can advise you where to go for the right information.FREIGHT OPTIONSORDERS OVER$750FREIGHT FREE!PANICDELIVERY1 HOUR DELIVERY AVAILABLEON REQUEST IN GREATERWELLINGTON AREA(Phone for availability and cost)NORTH ISLANDNEXT DAY $25.002 DAYS $15.00SOUTH ISLANDNEXT DAY $35.002 DAYS $25.00GREATERWELLINGTONAREASAME DAY DELIVERYIF ORDER IN BEFORE1.00PMUP TO 25KG $20.0026-50KG $24.0051-75KG $34.0076-100KG $44.00101-250KG $58.00ITS EASY TO BUY FROM USYou can fax, email or phone your order to us for prompt efficient service. We understandyour time is valuable, thats why, when you call ONSITE you get straightto the customer service team - no talking to computers or waiting in a queue!AFTER SALES SERVICEOur objective is your total satisfaction. ONSITE is here for the long haul, so westand behind our products.Any Items marked withthe ‘Heavy’ symbolabove may attractadditional freight costsdue to their heavyor bulky nature.Please call for prices98 E.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE

PRIORITY ORDER FORM FAX (04) 237 2513DO NOT REMOVE - PLEASE PHOTOCOPY FOR USEPOSTAL ADDRESSCOMPANYADDRESSSUBURBTOWN/CITYPHONEPURCHASE ORDER NO.ORDERED BYPOSTIONEMAILSIGNATUREFAXDELIVERY ADDRESSCOMPANYADDRESSSUBURBTOWN/CITYTICK YOUR PREFERRED DELIVERY METHODONE HOUR EXPRESS COURIERSAME DAY DELIVERYOVERNIGHTMY ORDERCODE DESCRIPTION QUANTITY UNIT PRICE TOTAL PRICEFOR FREIGHT OPTIONS PLEASE REFER TO PREVIOUS PAGE FREIGHT $SUB TOTAL $GST $TOTAL $MY PAYMENT DETAILSPLEASE INVOICE MY ACCOUNTI WISH TO APPLY FOR A 30 DAY ACCOUNTPLEASE CHARGE MY CREDIT CARDEXTRA INFORMATIONNATURE OF BUSINESSNO. OF EMPLOYEESCREDIT CARD DETAILSMASTERCARDVISACARD NO. EXPIRY DATE / /CARDHOLDER’S FULL NAMECARDHOLDER’S SIGNATUREEmail: onsite@powerpac.co.nzE.&O.E. - ALL PRICES SUBJECT TO GST - ALTERATION TO PRICES AND SPECIFICATIONS WITHOUT NOTICE99THANK YOU - WE APPRECIATE YOUR BUSINESS

ADHESIVES & SEALANTSCANTEEN SUPPLIESCAPITAL EQUIPMENTCONCRETE LAYERS ACCESSORIESCONTRACTORS TOOLSDIAMOND TOOLSFIRST AIDHAND TOOLSHAZARD BARRIERS & LIGHTINGHIRE EQUIPMENTMARKING & PAINTING EQUIPMENTPERSONNEL PROTECTIONPLASTERING TOOLSSITE SUPPLIES FORCIVIL & ROAD BUILDING, CONSTRUCTION, INDUSTRY, OUTDOOR WORKERSPUMPS, GENERATORS, WATERBLASTERSSANDING & GRINDINGSITE SECURITY FENCING