Maserati Race Car Transporter - CMC

MaseratiRace Car TransporterType Fiat 642 RN2Bartoletti, 1957S C A L E1:18Extraordinaryin a Class of the Exquisite

Maserati Race CPerfectly-designed rope mechanics with wheels and pulleys.Distinctive radiator grille made with individually-mounted barsand an ornamental strip. Hinged front panel with the Fiat logo,which enables access to the cooler inlet filler neck with a capthat can be opened.The 1950s and 1960s are known as an era thatwitnessed a boom of race car transporters, which arebeing re-discovered today and held in a high regard.The two similar-looking transporters of the ScuderiaFerrari and Maserati might well be the most famousand technically most mature transporters of thosedays. They were mounted on Fiat-bus chassis of thetype 642 RN2.With an open body work designed by Bartoletti, theresultant transporter was good for hauling three racecars. At first sight, those two transporters, equippedwith a 92 hp diesel in-line-engine, look alike exceptfor paintwork and decals. But upon a closer look, theydiffer in a considerable number of details.It`s an exact replica of the Maserati version, just as itwas used back in the late 50s till the mid 60s. We aresure you`ll like what we prepared for you.

ar TransporterTrue to the original. The authentic dashboard, complete withall instruments and control elements.The tailgate is equipped with a functional locking mechanism.This official transporter from the Scuderia Maseratifrom 1957 is a true eye catcher. Especially if it`sloaded with up to three CMC Maserati models. Handmounted of 2,640 single parts and approx. 50 cmlong. A true proof of CMC`s abilities. A countlessnumber of details and a contemporary two tonepainting will match even the highest expectations.Item number M-097

Removable ramps to load and unload the race cars.Functional storage drawer. It is designed to stow away the sixstop-blocks for holding race cars in place.Pivoting sun visors and adjustable exterior mirrors.Technical Data of the Original Vehicle:6-cylinder diesel in-line-engine type 364AAuto body work and vehicle hoist made by Bartoletti at Forli, Italy.Fiat-bus chassis with a ladder frameMaximum output:Approx. 92 hpDisplacement:6,650 ccmTop speed:85 km/hTotal length:9,085 mmTotal breadth:2,492 mmTotal height:2,924 mmCMC is offering a specialshowcase for this model (kit).Item number A-010Removable spare wheel and spare-wheel bracket with afunctional spring clip-lock. Authentic replication of the Trilexwheel system. Rear wheels are twin-tires.CMC GmbH & Co. KG Classic Model CarsRobert-Bosch-Straße 41 · D 73770 Denkendorf · GermanyPhone: +49 (0)711- 4 40 07 99-0 · Fax: +49 (0)711- 45 43 78info@cmc-modelcars.de · www.cmc-modelcars.deThe manufactured product might look slightly different.