Chemical Storage Tank Systems And Accessories ... - Poly Processing

More documents

Recommendations

Info

CAUTION! The life of a Sodium Hypochlorite Storage System isgreatly affected by the quality of the chemical itself. Tank ownersare cautioned to use high-quality sodium hypo with low iron, nickeland copper content, to avoid decomposition of the chemical andacceleration of the oxidization and degradation of the tank.Technical Overview:Sodium Hypochlorite Storage TanksNaOClSodium HypochloriteTankIMFO® Vertical Flat Bottom of XLPE with OR-1000:• 1,000–13,650 gallons• 1.9 spg ratingNOTE: 230–1,000 gallons do not require OR-1000.Non-IMFO® alternative*:Standard Vertical Flat Bottom XLPE with OR-1000:• 1,000–13,650 gallons• 1.9 spg ratingNOTE: 30–1,000 gallons do not require OR-1000.*Three-year warranty offered on Non-IMFO® alternatives.SAFE-Tank® XLPE:• 1,500–8,700 gallons• 1.9 spg rating for primary tank with OR-1000• Spg ratings for secondary tanks ≥ 3,000 gallons may beequal to or 1 less spg than primary tank.• All other tank sizes must equal primary tank spg rating.NOTE: 55–1,000 gallons do not require OR-1000.Black, white or gray color or insulation with mastic coatingrequired in outdoor applications to minimize bleachdegradation and maximize chemical half-life.Secondary containmentRecommend SAFE-Tank® secondary XLPE as shown above.Non-SAFE-Tank® Alternatives:• PPC secondary containment basin• Other secondary containment suitable for sodiumhypochlorite, of adequate size for useFittingsSidewall: Recommend 3˝ maximum B.O.S.S. fittingDome: No restrictionsPlumbing to the tank• Required use of flexible connections with fittings on lowerthird of sidewall»» Allows for lateral and vertical expansion and contractionof the tank»» Reduces pump and piping vibration stress on the tank• Expansion joints must meet the following minimum requirements:»»Axial Compression ≥ 1.5˝»»Axial Extension ≥ 0.625˝»»Lateral Deflection ≥ 0.750˝»»Angular Deflection ≥ 14°»»Torsional Rotation ≥ 4°VENTINGSee chart on page 63.FOUNDATION AND RESTRAINTS• PPC IMFO® tank pad or smooth concrete, asphalt or steelfoundation designed to accommodate IMFO®, SAFE-Tank®or vertical tank• No restraint or ladder attachment bands circumscribing thetank are allowed. Cable restraint systems must pass cablesover the top of the tank.TemperatureProduct should not exceed 100°F at delivery or duringstorage to reduce the decomposition of the chemical andmaintain ASTM D1998 design parameters.LidSAFE-Surge manway cover for pneumatically loaded tanks;bolted manway cover for all other applicationsOPTIONSRestraint systems for wind and seismic, level gauges, ladders,heating pads, insulation, fume-tight manway cover, NSF-61certification and engineering stamp14
OUR TANK SYSTEMSSulfuric Acid.Challenging a storage tank’s strength and design safety.H2SO4Sulfuric AcidSulfuric acid is used in a huge array of industrial applications, foreverything from water and wastewater treatment to the manufactureof chemicals, fertilizer and car batteries. But this highly exothermicacid presents serious storage challenges, for a number of reasons.• Sulfuric acid is an extremely heavy chemical that will test themechanical integrity of any material.• The addition of water to concentrated sulfuric acid leads to thedispersal of a sulfuric acid aerosol – or worse yet, an explosion.• If sulfuric acid is spilled on metals, it can create highly flammablehydrogen gas.• Skin and other bodily burns from sulfuric acid are potentiallymore serious than burns from other strong acids. Sulfuric aciddehydrates whatever it touches, and the heat caused by thatreaction with water can create secondary thermal damage.Poly Processing’s tanks and fittings can be combined specificallyto contain sulfuric acid, reducing the risks presented by this highlyacidic chemical.15
Page 3 and 4: INTRODUCTIONIntroductionWhen chemic
Page 5 and 6: WHY POLY PROCESSING3
Page 7 and 8: WHY POLY PROCESSINGWe’re The Only
Page 9 and 10: OUR INNOVATIONSInnovative Tank Solu
Page 11: OUR INNOVATIONSOur Other Innovation
Page 15: NaOClOUR TANK SYSTEMSSodium Hypochl
Page 20 and 21: Technical Overview:Sulfuric Acid St
Page 23 and 24: HClOUR TANK SYSTEMShydrochloric Aci
Page 26 and 27: NaOHHFH2SiF6H2O2Sodium HydroxideHyd
Page 28 and 29: NaOHSodium HydroxideThe Poly Proces
Page 30 and 31: HFHydrofluoric AcidThe Poly Process
Page 32 and 33: H2SiF6Hydrofluosilicic AcidThe Poly
Page 34 and 35: The Poly Processing SystemFor Ferri
Page 36 and 37: H2O2hydrogen peroxideThe Poly Proce
Page 38 and 39: Chemical Resistance GuideCHEMICALRE
Page 40 and 41: Tank Specifications38
Page 42 and 43: Our Tank OfferingsOpen-top tanksPro
Page 44 and 45: Vertical Tanks With IMFO®VERTICAL
Page 46 and 47: Vertical Tanks (continued)VERTICAL
Page 48 and 49: Secondary Containment BasinsSECONDA
Page 50 and 51: Fittings and AccessoriesPoly Proces
Page 52 and 53: FittingsBolted Spool FittingsThe Bo
Page 54 and 55: FittingsMade-Vertical FittingsMade-
Page 56 and 57: PlumbingFlexible Hose ConnectionsFl
Page 58 and 59: PlumbingCombination Internal & Exte
Page 60 and 61: Manways/LidsBolted (8/16) Manway Co
Page 62 and 63: AccessoriesLadder AssembliesPoly Pr
Page 64 and 65: RestraintsSeismic RestraintsUsed to
Page 66:
Delivery:Getting it to you at the r
show all

Chemical Storage Tank Systems And Accessories ... - Poly Processing

Create successful ePaper yourself

Delete template?

Save as template?