RoadRunner Owner's Manual - Data I/O Corporation

Operation • Operator Functions •• Programming DevicesOperator FunctionsNOTE: All job statistics will end (and be stored on the memorycard) when you cancel or end a job.2. Scroll to and select Job.3. Scroll to and select End.Programming and verification will continue only for devices still in theprogramming sockets. They will be picked and placed on the outputconveyor or into the Reject Bin, as appropriate. The job will then stop.4. Clear away excess devices from the output belt.5. Empty the Reject Bin as described in the next section.Emptying the Reject BinTo empty the Reject Bin, pause the RoadRunner and remove the Reject Binby its finger tab. Lift the bin up and pull out. Replace the bin once it has beenemptied. See Figure 3-19.3CAUTION: Collision hazard. To prevent damage to theprobe, ensure that the Reject Bin is completely in placeso the probe will not hit it.Figure 3-19—Replacing the Reject Bin. (Bin for Standard RoadRunnershown.)Emptying the Cover Tape ModuleWhen the Tape Take-Up Reel (part of the Cover Tape Module) looks full, theused cover tape needs to be removed.NOTE: Not all RoadRunners have a Cover Tape Reel.To empty the cover tape reel:Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010] 3—21