RoadRunner Owner's Manual - Data I/O Corporation

Operation • Operator Functions •• Setting Up RoadRunner for a Programming JobOperator FunctionsPosition LockingScrew3Figure 3-9—Adjustable Tape-In Module. The 3-Position Spacer is set for 24mm device tape.2. Rotate the Peel Bar for the cover tape counterclockwise 180 degrees tothe up position.Front TrackFigure 3-10—The Adjustable Tape-In Module with Peel Bar RotationShown.3. Lift and move the magnetic Front Track to the position that fits yourtape width.4. Rotate the Peel Bar back down.16/24/32 mm Tape-In Module (GTP–Gradual Tape Path)If you use a 16/24/32 mm GTP Adjustable Tape-In Module follow thesesteps to adjust the width:1. Loosen the Peel Bar Screw, and rotate the Peel Bar 90° out of the way.Then retighten the screw. See Figure 3-11 below.Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010] 3—11