RoadRunner Owner's Manual - Data I/O Corporation

Operation • Operator Functions •• Setting Up RoadRunner for a Programming JobOperator Functions3Figure 3-3—Removing the Screws Securing the Socket Adapter6. Rotate the adapter bracket up.7. Lift the adapter free, being careful not to damage the electronic circuitryattached to, or surrounding, the adapter.Adapterbracket in theup positionFigure 3-4—Removing the Socket AdapterCAUTION: Collision Hazard. Do not move the PNPhead while the Socket Adapter Bracket is in the UPposition. The head might get damaged. Always lower thebracket and screw it down before moving the PNP head.For more information, see“Changing the ActuatorPlate” on page 3-8.8. Insert the correct adapter, ensuring that it seats correctly on the dowelpins.9. Lower the adapter bracket and screw in the screws.10. Slide the Actuator Plate back into place. (The Actuator Plate and SocketAdapter must match.)11. When you are finished, release the Emergency-Stop button.3—6 Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010]