RoadRunner Owner's Manual - Data I/O Corporation

Installation • Mounting the RoadRunner •• Mounting RoadRunner [Universal GSM1,GSM2, Genesis]Mounting RoadRunner [Universal GSM1,GSM2, Genesis]2CAUTION: Heavy weight. Use great care when mountingRoadRunner to the feeder table. It is heavy, anddropping it can cause serious damage to RoadRunnerand anything it falls upon. Use only approved hardwareto mount RoadRunner to the SMT feeder tableTo mount the RoadRunner onto the Universal machine feeder bank, performthe following:!WARNINGCollision hazard. If mounted incorrectly, the GSMpick head might collide with RoadRunner. For thisreason Data I/O recommends mountingRoadRunner only on the front feeder banks near Beam-2.If RoadRunner is mounted on banks 3 and 4 (the rear feederbanks), ensure that the feeder bank is in the outbound positiononly and NOT in the inbound or double inbound positions.Do NOT remove the GSM CE Cover that covers the upper halfof the GSM feeder bank opening.NOTE: When selecting slot positions forRoadRunner, consider that access to it isfrom the right side.1. Hold the RoadRunner level and rest the nose on the feeder bank. Ensurethat the guide under the conveyor settles into a slot.2—22 Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010]