RoadRunner Owner's Manual - Data I/O Corporation

Installation • Mounting the RoadRunner •• Mounting RoadRunner [Siemens SIPLACE X2, X3, X4, X4i]Mounting RoadRunner [Siemens SIPLACE X2, X3, X4, X4i]2CAUTION: Heavy weight. Use great care when mountingRoadRunner to the feeder table. It is heavy, anddropping it can cause serious damage to RoadRunnerand anything it falls upon. Use only approved hardwareto mount RoadRunner to the SMT feeder table.!WARNINGFEEDER CARTS CAN TIP causing personal injury ordamage. Remove RoadRunner from the FeederCart before pulling the cart away from the SMTmachine.NOTE: When selecting slot positions forRoadRunner, consider that access to it isfrom the right side.NOTE: The SMT Adapter forSIPLACE X RoadRunner mustbe attached to RoadRunnerbefore being mounting onto aFeeder Bank.If the SMT Adapter is notattached to the RoadRunner,contact Data I/O support— attaching it requires removing theRoadRunner Conveyor Cover.To mount the RoadRunner onto the machine feeder table, perform the following:1. Holding RoadRunner level, align the grooves on the Adapter with ribson the Feeder Bank, and slide RoadRunner as far forward as it will go.2—20 Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010]