RoadRunner Owner's Manual - Data I/O Corporation

Installation • Mounting the RoadRunner •• Mounting RoadRunner [MYDATA MY9, MY12, MY15, MY19]Mounting RoadRunner [MYDATA MY9, MY12, MY15,MY19]2CAUTION: Heavy weight. Use great care when mountingRoadRunner to the feeder table. It is heavy, anddropping it can cause serious damage to RoadRunnerand anything it falls upon. Use only approved hardwareto mount RoadRunner to the SMT feeder table.To mount the Feeder Bank Adapter and RoadRunner onto a MYDATAMY-Series Assembly Machine:1. Slide the supplied Feeder Bank Adapter onto the assembly machinefeeder table at the desired slot. Push it forward as far as it will go.Figure 2-5—Install the Feeder Bank Adapter onto the SMT Machineseparately.2. Holding RoadRunner at a slight angle, slide it under the hook on theFeeder Bank Adapter so that the RoadRunner centering plate teethengage the pin next to the hook.pinhookTop View Into SMTFigure 2-6—Installing RoadRunner onto the Feeder Bank Adapter. A dowelon the Adapter (circled) mates with the RoadRunner nose.2—6 Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010]