RoadRunner Owner's Manual - Data I/O Corporation

1Overview • Specifications [Siemens, XLF, SIPLACE X] •• –Specifications [Siemens, XLF, SIPLACE X]FACILITIESAC input voltage requirements 100-240 V~ ; 50/60 Hz (single phase)AC Input PowerAir requirements @ 2dm 3 /s (4.0scfm)Air Inlet tube (varies)100 W (max).52 MPa (75±2 psi)6 mm (.24 in.) &8 mm (.31 in.) OD min.MODELS SUPPORTEDSTD & XLF models supported SIPLACE X models supported model ——DIMENSIONS — model ——model ——WidthWeight (net)Length (unaffected by reel)Length including 33 cm reelLength including 33 cm reelApproximate length protruding from SMT FeederTable outer edgeHeightInput tape width supported• 80F4; 80F5, F, S, HF, HS Series*,DSeries*, X3*• SIPLACE X2, X3, X4, X4iStandardXLF modelsSIPLACE X78 mm (3.1 in.)99.5 mm (3.9 in.)78 mm (3.1 in.) (unaffected by SMT Adapter)15 kg (33 lbs)21 kg (45 lbs)19 kg (41 lbs) includes SMT Adapter99 cm (39 in.)118 cm (46.5 in.)120.1 cm (47.3 in.) includes SMT Adapter56 cm (22 in.)76.2 cm (30 in.) includes (33 cm) reel70.6 cm (27.8 in.) includes 33 cm reel56 cm (22 in.) (unchanged by reel)52 cm (20.5 in.) includes (33 cm) reel49.4 cm (19.5 in.) includes 33 cm reel16 mm, 24 mm, 32 mm (optional: 12 mm)16 mm, 24 mm, 32 mm, 44 mm (Opt: 12 mm)16 mm, 24 mm, 32 mm (optional: 12 mm)DEVICE OUTPUT PLACEMENT (at SMT pick point)Output placement linear repeatability±.25 mmOutput placement rotational repeatability ±5°ENVIRONMENTOperating temperature rangeTemperature stabilization time after transportation20–40°C (68–104°F)≥ 8 hHumidity 5–90%* Supported using S-type feeder table in feeder positions 2 & 4, except X3 in 4 only.1—22 Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010]