RoadRunner Owner's Manual - Data I/O Corporation

1Overview • Precautions for Safe Operation •• –Precautions for Safe OperationThe RoadRunner System has been designed for safe and efficient operation.The system can be dangerous if the RoadRunner safety features andprecautions in this manual are ignored.ElectrostaticDischargeThe circuit boards insideRoadRunner are susceptibleto electrostaticdischarge (ESD), whichcan damage the circuitry.Also, devices processedthrough the RoadRunnerare very sensitive tostatic and can bedamaged by accidentalelectrostatic dischargewhile being handled.The easiest way toprevent damage fromESD is to make sure acommon static potential(ground) exists betweenstatic-sensitive devicesor components, theirenvironment, and theoperator.Perform all repairs at anESD-safe workstation.–To avoid possible personal injury or damage to the equipment, pleaseobserve the following practices:• Only trained personnel should install, maintain, repair, or troubleshootthis system.• Do not operate the ProLINE-RoadRunner unless you have been thoroughlytrained, and have read and understand the instructions in thismanual, particularly those that describe the system’s safety features.• Do not use ProLINE-RoadRunner for any application other than itsintended use.• Do not operate the system if the guards or safety devices are not intheir normal operating positions.• Do not operate RoadRunner with any of the outer sheet metal panelsremoved.• Do not operate RoadRunner while servicing, replacing, or adjusting anycomponent unless directed to do so in this manual. Make sure that theRoadRunner is properly shut down before performing any of theseoperations.• Do not place any part of your body near or in the direct path of movingparts.• Do not disable or attempt to defeat any of the protective safety featuresof this system. Personal injury or equipment damage can occur if anysafety systems on RoadRunner are disabled. If you suspect that a safetyfeature of the RoadRunner is damaged or malfunctioning, stop using theRoadRunner immediately and contact Data I/O Customer Service or alocal Data I/O approved service representative.• Use extra caution when working around the RoadRunner’s Output Belt.RoadRunner’s safety shields do not cover or fully enclose the outputconveyor. It is possible that an operator’s hands, other body parts, orloose clothing can get caught or pinched in it.• Wearing hearing protection is recommended while operating theRoadRunner. Sound pressure levels may exceed 85 decibels.• Shut off the pressurized air or disconnect the air hose before servicingpneumatic parts.1—14 Data I/O • ProLINE-RoadRunner Owner’s Manual • 096-0240 [updated Mar2010]