User Guide - PregSafe

This chapter of the Manual deals with how to interact with the menus, screens and popupwindows in PregSafe, and the significance of each field within a screen. This chapterserves as a reference source for the operation of PregSafe.1. The Add/view screenThe Add/View Screen summarizes all the information about the patient. PatientDemographics, Pregnancy, Requisition/Specimen and Assay Results each has its ownsection of this screen. To open any of these records, select the row of interest inside thesection and press Enter or double click. You may now add new information or edit theexisting data. Remember to save the changes by clicking the Update button. If there aremultiple records in a section, for example two specimens for a pregnancy, select theparticular one you want before double clicking. If there are two pregnancies, the datashown in the remaining sections will apply to the pregnancy record that is highlighted.Likewise for the remaining sections.To add a new record in any of the sections, select a blank field in that section anddouble click or press Enter. This will bring up a blank Add New Record screenappropriate to the section selected. Remember that the new record will be attached tothe highlighted record in the level above it.If the Add/View screen was opened as the result of a search, the navigation buttons atthe upper right allow you to move to other records that were produced by the search.The test status is displayed in the lower left part of the screen. These are the possiblestatuses.3