Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

More documents

Recommendations

Info

SMIQSOURce:CORRection Subsystem3.5.14.2 SOURce:CORRection SubsystemThe CORRection subsystem permits a correction of the output level. The correction is effected byadding user-defined table values to the output level as a function of the RF frequency. In the SMIQ, thissubsystem serves to select, transmit and switch on USER-CORRECTION tables (see Chapter 2,Section "User Correction (UCOR)" as well).Command Parameter Default Unit Remark[:SOURce]:CORRection[:STATe]ON | OFF:CSET:CATalog? name {,name}...Query only[:SELect]"Name of table":DATA:FREQuency300 kHz to RF max {,300 kHz to RF max }HzRF max depending on model:POWer-40 dBto 6dB {,-40 dBto 6dB}dB:DELete"Name of table"no query[:SOURce]:CORRection[:STATe] ON | OFFThe command switches the table selected using SOURce:CORRection:CSET on or off.Example: :SOUR:CORR:STAT ON *RST value is OFF[:SOURce]:CORRection:CSETThe commands to select and edit the UCOR tables are under this node.[:SOURce]:CORRection:CSET:CATalog?The command requests a list of UCOR tables. The individual lists are separated by means ofcommas. This command is a query and has no *RST value.Example: :SOUR:CORR:CAT? Answer: "UCOR1", "UCOR2", "UCOR3"[:SOURce]:CORRection:CSET[:SELect] "Name of table"The command selects a UCOR table. This command alone does not yet effect a correction. Firstthe table selected must be activated (cf. :SOURce:CORRection:STATe). If there is no table ofthis name, a new table is created. The name may contain up to 7 letters. This command triggersan event and hence has no *RST value.Example: :SOUR:CORR:CSET:SEL "UCOR1"[:SOURce]:CORRection:CSET:DATAThe commands to edit the UCOR tables are under this node.[:SOURce]:CORRection:CSET:DATA:FREQuency 300 kHz to RF max {,300 kHz to RF max }(RF max depending on model)The command transmits the frequency data for the table selected using:SOURce:CORRection:CSET. *RST does not influence data lists.Example: :SOUR:CORR:CSET:DATA:FREQ 100MHz,102MHz,103MHz,to1125.5555.03 3.51 E-9
SOURce:CORRection SubsystemSMIQ[:SOURce]:CORRection:CSET:DATA:POWer -40dB to 6dB {,-40dB to 6dB}The command transmits the level data for the table selected using:SOURce:CORRection:CSET. *RST does not influence data lists.Example: :SOUR:CORR:CSET:DATA:POWer 1dB, 0.8dB, 0.75dB,to[:SOURce]:CORRection:CSET:DELete "Name of table"The command deletes the table indicated from the instrument memory. This command triggers anevent and hence has no *RST value.Example: :SOUR:CORR:CSET:DEL "UCOR2"1125.5555.03 3.52E-9
Page 1:
Test and MeasurementDivisionOperati
Page 4 and 5:
Introduction on how to use the manu
Page 7 and 8:
Safety InstructionsWARNINGDanger of
Page 13 and 14:
ContentsSMIQ2.21 Arbitrary Waveform
Page 15 and 16:
ContentsSMIQ3 Remote Control.......
Page 17 and 18:
ContentsSMIQ3.7.4 Application of th
Page 19 and 20:
ContentsSMIQ5.3.9.2 AM Distortion .
Page 21 and 22:
ContentsSMIQC Annex C..............
Page 23 and 24:
ContentsSMIQFiguresFig. 1-1 SMIQ, v
Page 25 and 26:
ContentsSMIQFig. 2-81 Menu DIGITAL
Page 27 and 28:
ContentsSMIQFig. 2-168 DIGITAL STD
Page 29 and 30: ContentsSMIQFig. 2-244 Menu MEM SEQ
Page 31 and 32: Switchover to Remote ControlSMIQ3.1
Page 33 and 34: MessagesSMIQ3.2.2 Remote Control vi
Page 35 and 36: Structure and Syntax of the Device
Page 41 and 42: Description of CommandsSMIQ3.5 Desc
Page 43 and 44: Description of CommandsSMIQ3.5.2 Co
Page 45 and 46: Description of CommandsSMIQ*PRE 0 t
Page 47 and 48: ARB SystemSMIQ3.5.4 ARB SystemRefer
Page 49 and 50: ARB SystemSMIQ:ARB:WAVeform:FREE?Th
Page 51 and 52: ARB SystemSMIQ:ARB:CLOCk:SOURce INT
Page 53 and 54: ARB SystemSMIQ{CLOCK: frequency}(in
Page 55 and 56: ARB SystemSMIQTo be read by the SMI
Page 57 and 58: ARB SystemSMIQC-program for creatin
Page 59 and 60: BERT SystemSMIQ3.5.5 BERT SystemCom
Page 61 and 62: BERT SystemSMIQ:BERT:SETup:DENable
Page 63 and 64: BLER SystemSMIQ3.5.6 BLER SystemCom
Page 65 and 66: BLER SystemSMIQ:BLER:RESult?This co
Page 67 and 68: CALibration SystemSMIQ:CALibration:
Page 69 and 70: DIAGnostic SystemSMIQ3.5.8 DIAGnost
Page 71 and 72: DIAGnostic SystemSMIQ:DIAGnostic:IN
Page 73 and 74: FORMat SystemSMIQ3.5.10 FORMat Syst
Page 75 and 76: OUTPut SystemSMIQ3.5.12 OUTPut Syst
Page 77 and 78: OUTPut2 SystemSMIQ3.5.13 OUTPut2 Sy
Page 79: SOURce:AM SubsystemSMIQ3.5.14.1 SOU
Page 83 and 84: SOURce:DECT SubsystemSMIQCommand Pa
Page 85 and 86: SOURce:DECT SubsystemSMIQ[:SOURce]:
Page 91 and 92: SOURce:DIST SubsystemSMIQ[:SOURce]:
Page 93 and 94: SOURce:DIST SubsystemSMIQ[:SOURce]:
Page 95 and 96: SOURce:DM SubsystemSMIQ[:SOURce]:DM
Page 97 and 98: SOURce:DM SubsystemSMIQCommand Para
Page 107 and 108: SOURce:FM SubsystemSMIQ3.5.14.6 SOU
Page 109 and 110: SOURce:FREQuency SubsystemSMIQ3.5.1
Page 111 and 112: SOURce:FSIM-SubsystemSMIQ3.5.14.8 S
Page 113 and 114: SOURce:FSIM-SubsystemSMIQ[:SOURce]:
Page 123 and 124: SOURce:GPS SubsystemSMIQ[:SOURce]:G
Page 125 and 126: SOURce:GSM Subsystem (Digital Stand
Page 131 and 132:
SOURce:IS95 Subsystem (Digital Stan
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
SOURce:LIST SubsystemSMIQ3.5.14.12
Page 141 and 142:
SOURce:MARKer SubsystemSMIQ3.5.14.1
Page 143 and 144:
SOURce:MODulation SubsystemSMIQ3.5.
Page 145 and 146:
SOURce:NADC SubsystemSMIQCommand Pa
Page 147 and 148:
SOURce:NADC SubsystemSMIQ[:SOURce]:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
SOURce:PDC SubsystemSMIQ3.5.14.17 S
Page 155 and 156:
SOURce:PDC SubsystemSMIQ[:SOURce]:P
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
SOURce:PHS SubsystemSMIQ3.5.14.19 S
Page 165 and 166:
SOURce:PHS SubsystemSMIQ[:SOURce]:P
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
SOURce:PM SubsystemSMIQ3.5.14.20 SO
Page 173 and 174:
SOURce:POWer SubsystemSMIQ3.5.14.21
Page 175 and 176:
SOURce:POWer SubsystemSMIQ[:SOURce]
Page 177 and 178:
SOURce:ROSCillator SubsystemSMIQ3.5
Page 179 and 180:
SOURce:SWEep SubsystemSMIQ[:SOURce]
Page 181 and 182:
SOURce:WCDMa Subsystem (NTT DoCoMo/
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
SOURce:W3GPp-SubsystemSMIQCommand P
Page 191 and 192:
SOURce:W3GPp-SubsystemSMIQCommand P
Page 193 and 194:
SOURce:W3GPp-SubsystemSMIQ[:SOURce]
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
SOURce:W3GPp:ENHanced/OCNS/ADDition
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
SOURce2:FREQuency SubsystemSMIQ3.5.
Page 225 and 226:
SOURce2:MARKer SubsystemSMIQ3.5.15.
Page 227 and 228:
SOURce2:SWEep SubsystemSMIQ:SOURce2
Page 229 and 230:
STATus SystemSMIQ:STATus:OPERation:
Page 231 and 232:
SYSTem SystemSMIQ:SYSTem:BEEPer:STA
Page 233 and 234:
SYSTem SystemSMIQ:SYSTem:MSEQuence:
Page 235:
SYSTem SystemSMIQ:SYSTem:SERRor?Thi
Page 238:
SMIQTEST System:TEST:MCOD?The comma
Page 242 and 243:
SMIQTRIGger System:TRIGger:MSEQuenc
Page 244 and 245:
SMIQInstrument Model and Command Pr
Page 246 and 247:
SMIQInstrument Model and Command Pr
Page 248 and 249:
SMIQStatus Reporting SystemCONDitio
Page 250 and 251:
SMIQStatus Reporting System3.7.3 De
Page 252 and 253:
SMIQStatus Reporting System3.7.3.4
Page 254 and 255:
SMIQStatus Reporting System3.7.4 Ap
Page 256 and 257:
SMIQStatus Reporting System3.7.5 Re
Page 258 and 259:
SMIQFast Restore Mode3.8.2 Call-Up
Page 260 and 261:
SMIQMaintenance and Troubleshooting
Page 262 and 263:
SMIQTest Equipment and Test Assembl
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
SMIQPreparation, Recommended Test F
Page 270 and 271:
SMIQTest Procedures5.3.2.2 Settling
Page 272 and 273:
SMIQTest Procedures5.3.2.3 Setting
Page 274 and 275:
SMIQTest ProceduresRecommended test
Page 276 and 277:
SMIQTest ProceduresPassive measurem
Page 278 and 279:
SMIQTest Procedures5.3.4.4 Non-Inte
Page 280 and 281:
SMIQTest Procedures5.3.5.2 Subharmo
Page 282 and 283:
SMIQTest ProceduresNonharmonics of
Page 284 and 285:
SMIQTest Procedures5.3.5.5 SSB Phas
Page 286 and 287:
SMIQTest Procedures5.3.7 Internal M
Page 288 and 289:
SMIQTest Procedures5.3.8.3 Error Ve
Page 290 and 291:
SMIQTest Procedures5.3.8.6 I/Q Imba
Page 292 and 293:
SMIQTest Procedures5.3.9 Amplitude
Page 294 and 295:
SMIQTest Procedures5.3.10 Broadband
Page 296 and 297:
SMIQTest Procedures5.3.12.3 FM Freq
Page 298 and 299:
SMIQTest Procedures5.3.12.7 Level M
Page 300 and 301:
SMIQTest Procedures5.3.14.2 Analog
Page 302 and 303:
SMIQTest Procedures5.3.15 Data Gene
Page 304 and 305:
SMIQTest ProceduresSELECT CONTROL L
Page 306 and 307:
SMIQTest Procedures5.3.16 Digital S
Page 308 and 309:
SMIQTest ProceduresEDGE measurement
Page 310 and 311:
SMIQTest Procedures The adjacent-ch
Page 312 and 313:
SMIQTest Procedures5.3.17 IS-95 CDM
Page 314 and 315:
SMIQTest Procedures5.3.19 3GPP W-CD
Page 316 and 317:
SMIQTest Procedures Settings on dem
Page 318 and 319:
SMIQTest Procedures For 5 MHz offse
Page 320 and 321:
SMIQTest Procedures Channel table:-
Page 322 and 323:
SMIQTest ProceduresCHNO CHAN. CODE
Page 324 and 325:
SMIQTest Procedures Menu Select BS/
Page 326 and 327:
SMIQTest Procedures5.3.23.2 Additio
Page 328 and 329:
SMIQTest Procedures The result is a
Page 330 and 331:
SMIQTest Procedures5.3.23.6 Doppler
Page 332 and 333:
SMIQTest Procedures5.3.24.2 Additio
Page 334 and 335:
SMIQTest Procedures5.3.24.5 Signal/
Page 336 and 337:
SMIQTest Procedures5.3.24.6 Signal/
Page 338 and 339:
SMIQTest Procedures5.3.25 Arbitrary
Page 340 and 341:
SMIQTest Procedures5.3.25.4 Level D
Page 342 and 343:
SMIQTest ProceduresExample of a mea
Page 344 and 345:
SMIQPerformance Test ReportSection
Page 346 and 347:
SMIQPerformance Test ReportSection
Page 348 and 349:
SMIQIEC/IEEE Bus InterfaceAAnnex AA
Page 350 and 351:
SMIQIEC/IEEE Bus InterfaceA.1.4Inte
Page 352 and 353:
SMIQRS-232-C InterfaceA.2.2.1Transm
Page 354:
SMIQAsynchronous Interface SERDATAA
Page 357 and 358:
List of Error MessagesSMIQContinuat
Page 359 and 360:
List of Error MessagesSMIQDevice Sp
Page 361 and 362:
Page 363 and 364:
Page 366 and 367:
SMIQList of CommandsCAnnex CC.1 Lis
Page 368 and 369:
SMIQList of CommandsCommand Paramet
Page 370 and 371:
Page 372 and 373:
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
Page 390 and 391:
SMIQProgramming ExamplesDAnnex DD.1
Page 392 and 393:
SMIQProgramming Examples6. List Man
Page 394:
SMIQProgramming ExamplesReading out
Page 397 and 398:
IndexSMIQvalue range ..............
Page 399 and 400:
IndexSMIQDisplaybrightness.........
Page 401 and 402:
IndexSMIQBIT CLOCK ................
Page 403 and 404:
IndexSMIQadditional................
Page 405 and 406:
IndexSMIQQAM modulation............
Page 407 and 408:
IndexSMIQbroadband AM..............
show all

Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?