Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

SMIQTest Equipment and Test Assemblies5 Checking the Rated Characteristics5.1 Test Equipment and Test Assemblies5.1.1 Measuring Equipment and AccessoriesTable 5-1Measuring equipment and accessoriesItem Type of Instrument Required Characteristics Suitable Instrument R&S Order No.1 Frequency counter(included in item 2)1 Hz to RF max,resolution 0.1 Hz2 RF spectrum analyzer 100 Hz to 26 GHz,synthesizer tuning,dynamic range >80 dBFSIQ26 1119.6001.263 Storage oscilloscope 100 Msamples/s,averaging function4 Controller Industry standard PC/XT/AT withIEC-625 interfacePSM17 1116.5004.705 Signal generator of highspectral purity0.1 MHz to RF max,SSB noise level 100 MHz,two channels with DC coupling8 RF power meter 5 kHz to RF max NRVS withNRV-Z511020.1809.020857.9004.029 Precision attenuator Attenuation 0 to 120 dB,resolution 5 dBRSG 1009.4505.0210 Low-noise preamplifier 5 kHz to RF max,gain > 20 dB,noise figure < 10 dB11 VSWR bridge 40 kHz to 4 GHzdirectivity > 40 dBZRC 1039.9492.55/5212 DC voltage source Setting range 0 to 10 V NGMD35 0117.7127.0213 RF power amplifier 10 MHz to RF max,power > 1 W14 Audio analyzer Generator up to 100 kHz,level meter,distortion meter15 Modulation analyzer 100 kHz to RF max,AM, FM, ϕM, distortion meter,weighting filter ITU-R, ITU-T16 Mixer 10 MHz to RF max, high levelUPDUPL06FMB withFMA-B1, FMA-B2,1030.7500.051078.2008.06856.5005.5217 Pulse generator Pulse repetition frequency up to10 MHz, TTL levelAFG 377.2100.0218 Sinewave generator 10 Hz to 8 MHz,1 V (V peak), two channelsADS,AMIQ1012.4002.02,1110.2003.02,1125.5555.03 5.1E-9