Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

SMIQSOURce:W3GPp:ENHanced/OCNS/ADDitional SubsystemsZERO all bits set to 0ONE all bits set to 1PATTern bit pattern selected with :W3GP:BST:ENH:CHAN12:DCCH:PATTDLISt data list selected with :W3GP:BST:ENH:CHAN12:DCCH:DSELExample: :SOUR:W3GP:BST:ENH:CHAN12:DCCH PN11 *RST value is PN15[:SOURce]:W3GPp:BSTation:ENHanced:CHANnel:DCCH:PATTern #B0 to #B111..1, 1 to 24The command defines a bit pattern for the data of the DCCH channel. The first parameter sets the bitpattern (optionally in hex, oct or bin notation), the second one indicates the number of bits to be used.Example: :SOUR:W3GP:BST:ENH:CHAN12:DCCH:PATT #H3F, 8 *RST value is #H0, 1[:SOURce]:W3GPp:BSTation:ENHanced:CHANnel:DCCH:DSELect 'name'The command selects a data list for the data of the DCCH channel.Example: :SOUR:W3GP:BST:ENH:CHAN12:DCCH:DSEL 'test' without *RST value[:SOURce]:W3GPp:BSTation:ENHanced:CHANnel:TPC ZERO | ONE | PATTern | DLIStThe command selects the data source for the TPC field of the corresponding channel.ZERO All bits set to 0ONE All bits set to 1PATTern The bit pattern selected with :W3GP:BST:ENH:CHAN12:TPC:PATTDLISt The data list selected with :W3GP:BST:ENH:CHAN12:TPC:DSELThe command selects the data source for the TPC field of the corresponding channel.Example: :SOUR:W3GP:BST:ENH:CHAN12:TPC ZERO *RST value is PATT[:SOURce]:W3GPp:BSTation:ENHanced:CHANnel:TPC:PATTern #B0 to #B111..1, 1 to 24The command defines a bit pattern for the TPC field of the corresponding channel. The firstparameter sets the bit pattern (optionally Hex, Oct or Bin syntax), the second one indicates thenumber of bits to be used.Example: :SOUR:W3GP:BST:ENH:CHAN12:TPC:PATT #H3F, 8 *RST value is #H0, 1[:SOURce]:W3GPp:BSTation:ENHanced:CHANnel:TPC:DSELect 'name'The command selects a data list for the TPC field of the corresponding channel.Example: :SOUR:W3GP:BST:ENH:CHAN12:TPC:DSEL 'test' without *RST value[:SOURce]:W3GPp:BSTation:ENHanced:CHANnel:MCODe ON | OFFThe command switches the multicode for the corresponding channel on or off.Example: :SOUR:W3GP:BST:ENH:CHAN12:MCOD ON *RST value is OFF[:SOURce]:W3GPp:BSTation:OCNS...The commands for generating the OCNS superimposed impairments for the enhanced 3 GPP W-CDMA channels are under this node. The commands are only available with option SMIQB48installed. They are only effective if the link direction is set to FORW (SOUR:W3GP:BST:ENH:LINKFORW) and are only valid for base station 1 (suffix 2, 3 or 4 after BSTation – as in the higherW-CDMA commands – is not permitted). All OCNS settings become effective only after executionof :W3GP:BST:OCNS:EXEC.[:SOURce]:W3GPp:BSTation:OCNS:STATe ON | OFFThe command activates the OCNS channels (ON) or deactivates them (OFF).Example: :SOUR:W3GP:BST:OCNS:STAT ON *RST value is OFF1125.5555.03 3.187 E-9