Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

SOURce:W3GPp:ENHanced/OCNS/ADDitional SubsystemsSMIQCommand Parameter DefaultUnitRemark[:SOURce]:W3GPp:MSTationENHanced:DPCCh:STATe:POWerON | OFF:DPCCh -60.0 to 0.0 dB:DPDCh -60.0 to 0.0 dB:DERRor:STATeON | OFF:RATE 1E-1 to 1E-7:BITMobile station:DPDCh? Query only:DTCH? Query only:DCCH? Query only:BLOCk:STATeON | OFF:RATE 1E-1 to 1E-7:DTCH? Query only:DCCH? Query only:CHANnel where i = 0 | [1] | 2 | 3 | 4 | 5 | 6:ADDitional:SRATe? D15K | D30K | D60K | D120K | D240K | D480K |D960K:CHNCode?:DATA PN9 | PN11 | PN15 | PN16 | ZERO | ONE |PATTern | DLISt:PATTern #B0 to B111..1, 1 to24:DSELect'name':DTCH PN9 | PN11 | PN15 | PN16 | ZERO | ONE |PATTern | DLISt:PATTern #B0 to B111..1, 1 to 24:DSELect'name':DCCH PN9 | PN11 | PN15 | PN16 | ZERO | ONE |PATTern | DLISt:PATTern #B0 to B111..1, 1 to 24:STATe:DSELect'name'ON | OFF:COUNt 1 to 50:SCODe:STEP #H1 to #H100:POWer:OFFSet -20.0 to 20.0 dB(S/s)Insert bit errors in dataChannelization codeQuery onlyNote:The calculation of the W-CDMA sequences is rather time-consuming and should be re-startedfor any new setting. The W-CDMA modulation is therefore switched off for each command(:SOUR:W3GP:STAT OFF performed automatically). The user can now perform several settingswithout any delay and has to switch on again the W-CDMA modulation (with:SOUR:W3GP:STAT ON). The calculations are performed and the previous settings areeffective after this command is given.1125.5555.03 3.182E-9