Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

SMIQSOURce:W3GPp-Subsystem[:SOURce]:W3GPp:MSTation:DPDCh:ORATe D15K | D30K | D60K | D120K | D240K | D480K |D960K | X2 | X3 | X4 | X5 | X6The command sets the overall symbol rate. It determines the structure of the channel table, thesymbol rate of channels and the channelization codes.Example: :SOUR:W3GP:MST3:DPDC:ORAT D240K *RST value is D30K[:SOURce]:W3GPp:MSTation:DPDCh:POWer 0 to 15The command determines the power of each channel.Example: :SOUR:W3GP:MST3:DPDC:POW –3.0 *RST value is 0.0[:SOURce]:W3GPp:MSTation:DPDCh:SRATe? D15K | D30K | D60K | D120K | D240K |D480K | D960KThe command queries the symbol rate of the channels.Example: :SOUR:W3GP:MST3:DPDC3:SRAT?[:SOURce]:W3GPp:MSTation:DPDCh:TYPE?The command queries the type of channels.Example: :SOUR:W3GP:MST3:DPDC3:TYPE?[:SOURce]:W3GPp:MSTation:DPDCh:CCODe?The command queries the channelization code of the channels.Example: :SOUR:W3GP:MST3:DPDC3:CCOD?[:SOURce]:W3GPp:MSTation:DPDCh:DATA PN9 | PN11 | PN15 | PN16 | ZERO | ONE |PATTernThe command sets the data source.PNx pseudo random sequence of length xZERO all bits are set to 0ONE all bits are set to 1PATTern bit pattern selected with the following commandExample: :SOUR:W3GP:MST3:DPDC3:DATA PN9 *RST value is PN15[:SOURce]:W3GPp:MSTation:DPDCh:PATTern #B0 to B111..1, 1 to 24This command sets the bit pattern. It is only used if :W3GP:MST:DPDC:DATA PATT is set. Thefirst parameter sets the bit pattern (optionally Hex, Oct or Bin syntax), the second one indicatesthe number of bits to be used.Example: :SOUR:W3GP:MST3:DPDC3:PATT #H3F, 8 *RST value is #H0, 11125.5555.03 3.179 E-9