21.07.2015 Views

Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>SMIQ</strong>SOURce:W3GPp-Subsystem[:SOURce]:W3GPp:MSTation:PRACh:CPOWer -60 to 0 dBThe command sets the power of the control part.Example: :SOUR:W3GP:MST3:PRAC:CPOW -20 *RST value is 0.0[:SOURce]:W3GPp:MSTation:PRACh:MLENgth 1 | 2The command sets the length of the message parts.Example: :SOUR:W3GP:MST3:PRAC:MLEN 2 *RST value is 1[:SOURce]:W3GPp:MSTation:PRACh:SIGNature 0 to 15The command sets the signature.Example: :SOUR:W3GP:MST3:PRAC:SIGN 3 *RST value is 0[:SOURce]:W3GPp:MSTation:PRACh:ASLot 0 to 14The command offsets the start time of PRACH. The time expressed in timeslots is obtained bydoubling the number of ASLot.Example: :SOUR:W3GP:MST3:PRAC:ASL 3 *RST value is 0[:SOURce]:W3GPp:MSTation:PRACh:SRATe D15K | D30K | D60K | D120KThe command sets the symbol rate.Example: :SOUR:W3GP:MST3:PRAC:SRAT D120K *RST value is D30K[:SOURce]:W3GPp:MSTation:PRACh:DATA PN9 | PN11 | PN15 | PN16 | ZERO | ONE | PATTernThe command sets the data source.PNx pseudo random sequence of length xZERO all bits set to 0ONE all bits set to 1PATTern bit pattern selected with the following commandExample: :SOUR:W3GP:MST3:PRAC:DATA ZERO *RST value is PN15[:SOURce]:W3GPp:MSTation:PRACh:PATTern #B0 to B111..1, 1 to 24This command selects the bit pattern. It is only used if :W3GP:MST:PRAC:DATA PATT is set.The first parameter sets the bit pattern (optionally Hex, Oct or Bin syntax), the second oneindicates the number of bits to be used.Example: :SOUR:W3GP:MST3:PRAC:PATT #H3F, 8 *RST value is #H0, 1[:SOURce]:W3GPp:MSTation:PRACh:TFCI 0 to 1023The command sets the value for the TFCI (transport format combination indicator) field.Example: :SOUR:W3GP:MST3:PRAC:TFCI 63 *RST value is 0[:SOURce]:W3GPp:MSTation:PCPCh...Commands for setting the physical common packet channel are under this node. The commandsare only relevant under :W3GP:MST:MODE PCPC.[:SOURce]:W3GPp:MSTation:PCPCh:PREPetition 0 to 10The command sets the number of repetitions of the preamble.Example: :SOUR:W3GP:MST3:PCPC 4 *RST value is 11125.5555.03 3.175 E-9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!