Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

SOURce:PDC SubsystemSMIQ[:SOURce]:PDC:SLOT[:SOURce]:RCHannel:DLISt ‘name’The command selects a data list. This list will not be used unless it is set as a data source bymeans of the :SOUR:PDC:SLOT:RCH DLIS command. This command triggers an event andhence has no *RST value.Example: :PDC:SLOT:RCH:DLIS ’test’[:SOURce]:PDC:SLOT[:SOURce]:SI PN9 | PN11 | PN15 | PN16 | PN20 | PN21 | PN23 | DLISt |SDATaThe command determines the data source for the sync information field (for :SLOT:TYPE SYNC).Example: :SOUR:PDC:SLOT2:SI DLIS *RST value is PN9[:SOURce]:PDC:SLOT[:SOURce]:SI:DLISt ‘name’The command selects a data list. This list will not be used unless it is set as a data source bymeans of the :SOUR:PDC:SLOT:SI DLIS command. This command triggers an event andhence has no *RST value.Example: :SOUR:PDC:SLOT:SI:DLIS ’test’[:SOURce]:PDC:SLOT:PREamble #H0 to #H... (2/6/48/102 bits)The command sets the value of the ‘P’ bits. The length and the *RST value depend on the slottype and the link direction::SLOT:TYPETCHSYNCVOXTCHSYNC:LINKUPUPUPDOWNDOWNLength (bits)24862102*RST value.29999 9999 999926226 6666 6666 6666 6666 6666 6666Example: :SOUR:PDC:SLOT2:PRE #H1 For *RST value see above[:SOURce]:PDC:SLOT:SYNC #H0 to #HFFFFF/FFFFFFFF (20/32 bits)The command sets the value of the sync word. The length 32bit is only available for SLOT:TYPESYNC.Example: :SOUR:PDC:SLOT2:SYNC #H1A *RST value depends on SLOT[:SOURce]:PDC:SLOT:SYNC2 #H0 to #HFF... (20/32 bits)The command sets the value for the sync word in the superframe (only available for:PDC:SFRA:STAT ON).Example: :SOUR:PDC:SLOT2:SYNC2 #H1AB *RST value is 0[:SOURce]:PDC:SLOT:CCODe #H0 to #HFF (8 bits)The command sets the value for the color code.Example: :SOUR:PDC:SLOT2:CCOD #H1F *RST value is 0[:SOURce]:PDC:SLOT:POSTamble #H0 to 3FF... (78 bits)The command sets the value for postamble (only valid for SLOT:TYP SYNC and LINK DOWN).Example: :SOUR:PDC:SLOT2:POST #HF2 *RST value is 2666 6666 6666 6666 6666[:SOURce]:PDC:SLOT:SF 0 | 1The command sets the state of the steal flag.Example: :SOUR:PDC:SLOT2:SF 1 *RST value is 01125.5555.03 3.132E-9