Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

SOURce:GSM Subsystem (Digital Standard GSM/EDGE)SMIQ3.5.14.10 SOURce:GSM Subsystem (Digital Standard GSM/EDGE)Note: #B0 to #B1 are characters which are entered in binary form manually. SCPI (and IEEE 488.2)also accept the entry of non-numeric characters in octal and hex such as#H|h ,#Q|q and#B|b .The characters are always output in binary format after a query.Command Parameter DefaultunitRemark[:SOURce]:GSM:STATe:STANdard:FORMat:FSK:DEViation:SRATe:FILTer:TYPE:PARameter:SEQuence:TRIGger:SOURce:INHibit:DELay:OUTPut[1|2]:DELay:POLarity:PERiod:CLOCk:SOURce:DELay:PRAMp:PRESet:TIME:SHAPe:DELay:ROFFset:FOFFset:SLOT:ATTenuation:FLISt:PREDefined:CATalog?:LOAD:CATalog?:LOAD:STORe:DELeteON | OFF(without)GMSK | GFSK1kHz to 300 kHz1kHz to 300 kHzGAUSs0.2 to 0.7AUTO | RETRigger | AAUTo | ARETriggerEXTernal | INTernal0 to 67.1E60 to 65535SLOT | FRAMe0 to 1249POSitive | NEGative1 to 67.1E6INTernal | EXTernal0 to 1.0(without)0.25 to 16LINear | COSine-1.0 to +1.0-9 to +9-9 to +90 to 70 dB name {,name}...‘name’ name {,name}...‘name’‘name’‘name’HzHzDBNo queryOutput 1 onlyOutput 2 onlyNo queryquery onlyQuery onlyNo queryNo query1125.5555.03 3.96E-9