21.07.2015 Views

Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SOURce:FSIM-Subsystem<strong>SMIQ</strong>[:SOURce]:FSIMulator:PATH:DELay 0 to 1638.0E-6This command sets the signal delay in the path. The resolution is 50 ns. *RST value is 0Example: :SOUR:FSIM:PATH3:DEL 123E-6[:SOURce]:FSIMulator:PATH:CORRelationThis node provides the commands for setting the correlation to another path (only with option<strong>SMIQ</strong>B15).[:SOURce]:FSIMulator:PATH:CORRelation:PATH 0 | 7 to 12This command defines the correlating path 7 to 12 for path . If no correlation exists, 0 isselected.Example: :SOUR:FSIM:PATH3:CORR:PATH 12 *RST value is 0[:SOURce]:FSIMulator:PATH:CORRelation:COEFficent 0 to 1.0This command sets the correlation coefficient. The resolution is 0.05. *RST value is 1Example: :SOUR:FSIM:PATH3:CORR:COEF 0.3[:SOURce]:FSIMulator:PATH:CORRelation:PHASe 0 to 359 degreeThis command sets the correlation phase. The resolution is 1 degree. *RST value is 0Example: :SOUR:FSIM:PATH3:CORR:PHAS 180[:SOURce]:FSIMulator:PATH:LOGNormalThis node provides the commands for setting the lognormal fading.[:SOURce]:FSIMulator:PATH:LOGNormal:STATe ON | OFFThis command switches lognormal fading on or off.Example: :SOUR:FSIM:PATH3:LOGN:STAT OFF*RST value is OFF[:SOURce]:FSIMulator:PATH:LOGNormal:LCONstant 1 to 99 999This command enters the local constant in meters. The unit is not a component of this command.The resolution is 0.1 m. *RST value is 200Example: :SOUR:FSIM:PATH3:LOGN:LCON 50[:SOURce]:FSIMulator:PATH:LOGNormal:CSTD 0 to 12.0 dBThis command sets the standard deviation of lognormal fading. The resolution is 1 dB.Example: :SOUR:FSIM:PATH3:LOGN:CSTD 2.0 *RST value is 0[:SOURce]:FSIMulator:FDELay[:STATe] ON | OFFThis command switches the fine delay fading simulation on or off.Example: :SOUR:FSIM:FDEL ON *RST value is OFF[:SOURce]:FSIMulator:FDELay:STANdard G3C1 | G3C2 | G3C3| G3C4|G3UEC1| G3UEC2| G3UEC3| G3UEC4| G3UEC5| G3UEC6This command selects the fading standard for the fine delay simulation.G3C1 3GPP_BS_4.1.0._Case1G3C2 3GPP_BS_4.1.0._Case2 (with <strong>SMIQ</strong>15 only)G3C3 3GPP_BS_4.1.0._Case3 (with <strong>SMIQ</strong>15 only)1125.5555.03 3.88E-9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!