Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

SMIQSOURce:FSIM-Subsystem[:SOURce]:FSIMulator[:STANdard CDMA8 | CDMA30 | .....Selects the fading standard. All subsequent FSIM commands are set to a predefined value. Theparameters with a '6' as second character select the 6-path mode (this mode must be set if optionSMIQB15, Second Fading Generator is not available).CDMA8. CDMA30, CDMA100NADC8, NADC50, NADC100GTU3, G6TU2, GTU50, G6TU50GSM Typical UrbanGHT100, G6HT100GSM Hilly TerrainGRA250GSM Rural AreaGET50, GET100GSM Equal TestPTU1, P6TU1, PTU50, P6TU50DCS1800/PCS1900 Typical UrbanPHT100, P6HT100DCS1800/PCS1900 Hilly TerrainPRA130DCS1800/PCS1900 Rural AreaPET50, PET100DCS1800/PCS1900 Equal TestTTUTetra Typical UrbanTHTTetra Hilly Terrain,TETTetra Equal TestExample: :SOUR:FSIM:STAN NADC50 *RST value: CDMA81125.5555.03 3.85 E-9