Operating Manual R&S SMIQ - Volume 1 - Rohde & Schwarz

SOURce:DM SubsystemSMIQ[:SOURce]:DM:FLISt:DELete ‘The command deletes the filter list specified by . This command triggers an event andhence has neither *RST value nor query.Example: :SOUR:DM:FLIS:DEL ’TEST2’[:SOURce]:DM:FLISt:FREE?The command returns the free space available for filter data as a numeral.Example: :SOUR:DM:FLIS:FREE?[:SOURce]:DM:FLISt:POINts?The command returns the number of values of the currently selected list.Example: :SOUR:DM:FLIS:POIN?[:SOURce]:DM:STANdard APCFm | APCQpsk | ASK | BLUetooth | CDPD | CT2 | DECT | GSM |GSMEdge | IRIDium | FIS95 | RIS95 | NADC | PDC | PHS | TETRa | TFTS |PWT | ICOBpsk | ICOGmsk | ICOQpsk | WORLdspace | QWCDma | AT55The command adjusts the modulation parameters MODULATION, SYMBOL RATE, FILTER andCODING to the selected standard. The default setting is USER. This setting is always activatedautomatically if one of the modulation parameters is changed and does not correspond to theselected standard. QWCDma is only available with option SMIQB47. WORLDspace only withoption SMIQB17.APCFmAPCO4FMAPCQpsk APCOQPSKExample: :SOUR:DM:STAN PHS *RST value USER[:SOURce]:DM:FORMat BPSK | GFSK | GMSK | QPSK | QIS95 | QINMarsat | QICO | QWCDma |OQPSk | OIS95 | P4QPsk | P4DQpsk | PSK8 | PSKE8 | ASK | FSK2 | FSK4 |AFSK4 | QAM16 | QAM32 | QAM64 | QAM256 | USERThe command selects the modulation. QWCDma is only available with option SMIQB47.P4DQpsk π/4DQSPKPSK2 is an alias for BPSKPSK4 is alias for QPSK (according to SCPI).QIS95 QPSK IS95OIS95 OQPSK IS95QWCDma WCDMA QPSKAFSK4 4FSK APCOUSER The list selected with DM:MLIS:SEL... and defined via DM:MLIS:DATA... isused.Example: :SOUR:DM:FORM GMSK *RST value is P4DQpsk[:SOURce]:DM:MDELay?Value for time delay of digital modulation between data input/output and RF output of the SMIQ.Example: :SOUR:DM:MDEL?[:SOURce]:DM:ASK:DEPTh 0 to 100 PCTThe commands sets the input value for the ASK modulation depth.Example: :SOUR:DM:ASK:DEPT 10 *RST value is 100 PCT1125.5555.03 3.74E-9