specialty nmr sample tubes - Spectra 2000 Srl

SPECIALTYNMR SAMPLE TUBESNON-GLASS SAMPLE CELLSA precision, non-glass sample cell for the study of Boron, Fluorine, Silicon and other types of samplesthat may be deemed “hazardous”. Available in 5mm and 10mm versions, these precision machined cellsfit smoothly into the respective standard thin wall sample tubes. A cap, made of the same material,screws into the top of the cell, providing a positive closure and the means for removing the cell with athreaded rod.Boron and Silicon samples can be studied by supporting the cell in a glass sleeve so that only thecell is in the receiver coil area. With the cap secured to the top of the cell, a threaded rod is screwed intothe top of the cap. This unit is slipped through a glass sleeve and is held in place by the support rod witha modified tube cap. Depending on the positioning of the poly cell in the RF coil area, it may bedesirable to cut off excess length of the support rod.Tests with Chloroform-d / TMS samples have shown line widths comparable to using the sample tubealone. Some additional shimming may be necessary. Individual results may vary and are dependentupon how well the instrument is tuned. We can offer no guarantee on performance and safety, especiallywith “hazardous” samples.SPECIFICATIONSSample Cell, 5mm version:Sample Cell, 10mm version:Cap, 5mm version:Cap, 10mm version:3.3mm ID x 4.1mm OD x 90mm long, 80mm maximum sample height7.5mm ID x 8.9mm OD x 90mm long, 80mm maximum sample height20mm long with 4-40 internal thread20mm long with ¼-20 internal threadSAMPLE CELL with CAPCatalog Number Tube OD Material Useful Temp RangeNE‐362‐T‐5NE‐362‐T‐10NE‐362‐K‐5NE‐362‐K‐10NE‐362‐P‐5NE‐362‐P‐10510510510PTFEPTFEKel‐FKel‐FP/PP/P‐73 to +204°C‐73 to +204°C‐240 to +204°C‐240 to +204°C0 to +80°C0 to +80°CVolume @ 60mmSample Height304 µl2.6 ml304 µl2.6 ml304 µl2.6 mlGLASS SLEEVE and SUPPORT RODCatalog NumberNE‐205‐5NE‐205‐10NE‐341‐5NE‐341‐10DescriptionGlass Sleeve, precision, 5mm OD x 120mm longGlass Sleeve, precision, 10mm OD x 120mm longSupport Rod, Kel‐F, ” x 8”, 4‐40 threadSupport Rod, PVC, ¼” x 8”, ¼‐20 threadEXTRA SAMPLE CELLS and CELL CAPSMaterialVersionSample CellCapCat.No.Cat.NoPTFE 5mm NE‐360‐T‐5 NE‐361‐T‐5PTFE 10mm NE‐360‐T‐10 NE‐361‐T‐5Kel‐F 5mm NE‐360‐K‐5 NE‐361‐K‐5Kel‐F 10mm NE‐360‐K‐10 NE‐361‐K‐10P/P 5mm NE‐360‐P‐5 NE‐361‐P‐5P/P 10mm NE‐360‐P‐10 NE‐361‐P‐10