RAKES - Reco

12 13TYPICAL FEATURES OF THE FELLA RAKESRAKE DEPOSIT TO THE RIGHTAll FELLA rakes (except central rakes) deposit the swath to the right. In this way, you always haveyour perfect swath in view, because the operating controls in the tractors nowadays are on the right.Depositing on the right – makes ergonomic sense!TINE FIXTUREThe tines are not pushed over the tine tube; instead each tine is bolted in from the bottom. This hasthe advantage that the side of the arm facing the forage is absolutely smooth and therefore no forageremains stuck to it. In the event that a tine becomes worn, all tines do not have to be removed in orderto change one of the inner tines. The tines also have greater freedom of movement because their movementis not limited by the tube.Swath deposit onthe right – makesergonomic sense!Each tine is bolted in place individuallybeneath the tine armTine fixturePOWER TRAINSAll power trains on FELLA rakes are equipped with overload protection and freewheeling clutches.The power trains are thereby protected against overload, which avoids expensive repairs. Long downtimesare also prevented during the forage harvesting season.Absolutely smooth front side of the tine armTINE ARMSAll FELLA tine arms consist of tough tube material and are manufactured in one piece. The connectionpoint to the tine arm is machined for a perfect fit which makes it possible to insert the tine arms easilyand reduces wear on this heavily stressed point to a minimum.Central rake power trainPerfectly fitting connection point to the tine armsCentral rake power train