TMS2000 - OEC Fluid Handling, Inc.

INSTRUCTION MANUALTMS20001.4 LIQUID LEAK SENSOR DESCRIPTIONTMS2000 can be integrated with a variety of liquid sensors used for monitoring secondarycontainment areas around tanks and pipes. The maximum is 8 sensors depending on the overalljob configuration; check the specific job design drawings for the actual number and type specified.Figures 1-5 through 1-8 show four (4) typical sensor types provided by Pneumercator with theirmost typical applications. Other non-Pneumercator models may be used; however, their use withTMS2000 should have been approved before attempting to wire them into the system.25' LONG18 AWG CABLE25' LONG18 AWG CABLECABLE GRIPCABLE GRIPNYLONTEFLON304 STAINLESSSTEELBUNA NFLOAT4.00"304 STAINLESSSTEEL316 STAINLESSSTEEL FLOAT4.00"1/2" LIQUIDTRIP POINT1/2" LIQUIDTRIP POINTØ1.50"LS600 LDBNØ1.75"LS600 LDSSDRAWING NO. 20006 REV. AFigure 1-5 – LS600 LD Series.62"(HEX FLAT)3.00"20' OR 25'22 AWG CABLEPULL RINGREMOVEDPASS-THRU OPENING SIZE3/4" NPT MINIMUMREMOVABLEPULL RINGES825-100F3 CONDUCTORCABLE1/4" NPTSHRINK TUBE("C" & "X" VERSIONS ONLY)CONVOLUTIONS ACCEPTS 1/2" ENTØ.75" 3.50"20' OR 25'22 AWG CABLEPULL RINGREMOVEDPASS-THRU OPENING SIZE3/4" NPT MINIMUMREMOVABLEPULL RING3 CONDUCTORCABLESHRINK TUBE("X" VERSION ONLY)1/4" NPTES825-200FEND ACCEPTS 1/2" ENTDRAWING NO. 20007 REV. AFigure 1-6 – ES825 SeriesTMS2000 Installation.doc 07-11-05PAGE 6