TMS2000 - OEC Fluid Handling, Inc.
TMS2000 - OEC Fluid Handling, Inc.
TMS2000 - OEC Fluid Handling, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
INSTRUCTION MANUAL<strong>TMS2000</strong>1.2 CONTROL CONSOLE DESCRIPTIONFigure 1-2 illustrates the standard <strong>TMS2000</strong> outline and dimensions. All standard configurations areequipped with 2 mag. probe/8 leak sensor inputs, 1 RS-232 serial port, 1 RS-485 serial port, 2 Fullyprogrammable Relay outputs/2 Dry contact inputs, NEMA 12 enclosure. There are four (4) basicconfigurations available:<strong>TMS2000</strong>-1<strong>TMS2000</strong>-2<strong>TMS2000</strong>-3<strong>TMS2000</strong>-4“Black Box” Remote Acquisition Unit w/o display.Front Panel Display w/o printer.Front Panel Display with impact printer.Front Panel Display with impact printer & autowinder.WARNINGInstallation MUST be done by qualified personnel familiar with local wiringcodes and explosion hazard electrical safety practices. FAILURE TO COMPLYMAY RESULT IN PERSONAL INJURY, PROPERTY LOSS AND EQUIPMENTDAMAGE.The standard <strong>TMS2000</strong> console enclosure is NEMA 12-rated for indoor installation. An optionalNEMA 4/4X enclosure is available for outdoor installation. Confirm enclosure rating on the approvallabel located on the exterior, left-hand side of the enclosure before installation outdoors. See Figure1.2 below for mounting flange locations and dimensions.OPTIONAL AUTOWIND PRINTERANNUNCIATOROPERATING MEMBRANE BUTTONSNON I.S. SECTIONNON I.S. & I.S. SECTIONPARTITION LINE(SHOWN FOR REFERENCE)5/16" DIA. [7.87 DIA.] MOUNTINGHOLES (4) PLACESCONDUIT OPENINGSA = 1 1/8" DIA. HOLEFOR 3/4" NPT *CONDUIT FITTINGB = 7/8" DIA. KNOCKOUTFOR 1/2" NPT *CONDUIT FITTINGC = 1 1/8" DIA. KNOCKOUTFOR 3/4" NPT *CONDUIT FITTING* OR EQUIVALENTA9 3/4[247.63]11 13/16[300.22]CBI.S. SECTION(LOW VOLTAGE)A9 27/32 [249.94]10 5/8 [269.75]11 11/32 [288.04]Figure 1-2 - <strong>TMS2000</strong> Console OutlineINDICATOR LIGHTSDIGITAL DISPLAYKEYED DOOR LOCK4 23/32[119.55](5 7/32 [132.73]OVERANNUNCIATOR)DIMENSIONS: INCHES [MM]DRAWING NO. 20048 REV. N/CWARNINGThe console is designed for Ordinary Location, Non-Hazardous installationonly, as defined by Underwriters Laboratories (UL) and the National ElectricalCode (NEC). DO NOT install where flammable vapors may be present. FAILURETO COMPLY MAY RESULT IN PERSONAL INJURY, PROPERTY LOSS ANDEQUIPMENT DAMAGE.<strong>TMS2000</strong> Installation.doc 07-11-05PAGE 3
Change language