TMS2000 - OEC Fluid Handling, Inc.
TMS2000 - OEC Fluid Handling, Inc.
TMS2000 - OEC Fluid Handling, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSTRUCTION MANUAL<strong>TMS2000</strong>3.5 DATA COMMUNICATIONS WIRINGThe console's power area is equipped with three (3) communications ports that are assigned asfollows:One (1) for external EIA RS-232 Interface to externally mounted computers or modems.One (1) for external EIA RS-485 Interface to externally mounted PNEUMERCATOR smartperipheral control devices.One (1) for use with an optional communications expansion board.Figure 3-10 shows the locations of these ports.CAUTIONAll communication terminations are located in the NON-INTRINSICALLY SAFEside of the <strong>TMS2000</strong> console. ALL wiring to these terminals MUST enter thedesignated conduit opening. Refer to FIGURE 1-3. FAILURE TO COMPLY MAYRESULT IN PERSONAL INJURY, PROPERTY LOSS AND EQUIPMENT DAMAGE.OPTIONALCOMMUNICATIONS CARDOPTIONALRELAY/ANALOGCARDRS-232 CONNECTIONRS-485 CONNECTIONSTANDARDRELAY OUTPUTSSTANDARD CONTACTCLOSURE INPUTSDRAWING NO. 20052 REV. N/CFigure 3-10 - Non-Hazardous Expansion Option Installation<strong>TMS2000</strong> Installation.doc 07-11-05PAGE 33
Change language