Vanessa Product card.pdf - NunnaUuni

VANESSAPRODUCT INFORMATION:Thermal energy: 50-57 kWh , PL: 51-59 kWhEnergy efficiency: 82 %, PL: 84 %CO%: 0,1 %, PL: 0,17 %Nominal heat output: 2,1 kW / 7,6 h, PL: 2,4 kW / 6,9 hHeat storage capacity:100% after 4,8 hours, PL: after 4,1 hours50% after 20,3 hours, PL: after 17,9 hours25% after 33,6 hours, PL: after 28,7 hoursLAYOUT DRAWINGS:VANESSA 3VANESSA 6PRODUCT NUMBERS:Product Product number Weight kg Height mmVANESSA 3 605861-3 1830 1575VANESSA 6 605861-6 1895 1575VANESSA 3 PL 606181-3 1830 1575VANESSA 6 PL 606181-6 1895 1575BOTTOM PLINTH:VANESSA 3 AND 6 & PL 200533 135 70VANESSA 3,VANESSA 3 PLVANESSA 6,VANESSA 6 PLSET PRICES FOR CUSTOMIZED CHANGES:* Extra layer 280 mm for inner stones* Extra layer 280 mm for outer stonesNEEDED FOR ASSEMBLY:* Mortar 1 x 25 kg (not included in NunnaUuni delivery)x...x, Measurement incl. shelf(...), Bottom plinth dimensions01/11

PRODUCT INFORMATIONBAKING OVEN /BAKING SPACEFIREWOOD ELECTRIC FLUE CALCULATION VALUES (2Width[mm]Depth[mm]Lengthfireplace /cooker[cm]Max amountof wood[kg]Lengthbaking oven[cm]Electricresistor(1Flue gastemperature[°C]Min. flue draught[Pa]Mass flow[g/s]Burning heatoutput [kW]Flueconnection[A/B] ØVanessa - - 33 15 - 900217 225 16 29,1 35 180 80Vanessa PL - - 33 15 - - 170 15 33,1 36,0 180 90Burning airapprox. m³/hFLUE CONNECTION TABLERECOMMENDED FLUE [mm] FLUE CONNECTION MEASUREMENTS [mm] IGNITION DAMPER [mm] (3 INCOMING AIRapprox.150x150approx.150x200approx.150x300roundØ [A] [B] [C] (4 [A] [B] [C] (4Incoming air pipelocation L [mm]Replacement airunitHRTVanessa - x x 180-210 150-200 300 300 (roundconnection: 260)150 220 1350 770 - 910400Vanessa PL - - - 180 - - - - - - 770 - 910400SAFETY DISTANCES TO COMBUSTIBLE MATERIALSAccording to EN 15250Behind On thesidesVanessa 150 150Vanessa PL 150 1501) Electric resistors are available only for deliveries within Finland.2) The flue calculation values apply for countries that require flue calculation in accordance with the DIN 18160 and DIN EN 13384 standards.It is recommendable to contact chimney sweeper beforehand.3) The use of an ignition damper is allowed only in Finland.4) When installing with bottom plinth, flue connection (+70mm) will be raised according to thickness of the plinth.Take a notice of the countryspecific approvals in section 3ANOTES!The flue heat category required by the fireplace is T350.The recommended minimum flue height is 5 m with Ø180 mm. In countries where the flue calculation is required, should the calculationbe done according to the instructions and regulations of the flue calculation.A damper designed for adjusting the draft is always recommended for a flue connection or flue.LCountry- and region-specific regulations must be adhered to when installing the fireplace01/11