Vert. Hoefer - Isogen Life Science

PROTEINELECTROPHORESIS

2-D ElectrophoresisSelection GuideFirst-dimension UnitIEF100IPG Length7 cm11-13 cm 17-24 cmPROTEIN ELECTROPHORESISGlass Plate Size(W x H)Gel CapacitySecond-dimension Unit10x8 cm1-2 gelsSE25010x10.5 cm 18x8 cm 18x16 cm 18x24 cm 28x21 cm1-4 gels* 1-4 gels*1-2 gels 1-4 gels* 1-2 gels* 1-2 gels* 1-6 gelsSE600,SE600XSE660SE260, SE640 SE400 SE410SE900Mini VEPS300BPS300BPower SupplyPS300BPS300B PS300B PS300B PS300B EV265*With optional divider plate

SE900 Large Format VerticalGel Electrophoresis UnitFor highly reproducible second-dimensionseparations on up to six 28 cm SDS-PAGE gelsPROTEIN ELECTROPHORESISFeatures and BenefitsNo upper buffer chamber–no gasketissues and no risk of buffer lossUtilizes minimal parts–easy to useand reliableExternal cooling and internal buffercirculation–ensures an even,constant, and uniform temperaturefor reproducible resultsUp to six 28 cm plates can be runat one time–perfect for highthroughput applicationsGlass plate sandwiches are hingedcassettes–allows for rapid and easyassembly before useBuilt-in draining port–avoids liftingof a heavy buffer-filled tankAssembly of the tank is easy–no clamps neededInnovative design enables re-use oftank buffer–decreased bufferconsumption for reduced costThe SE900 was designed as a dedicated unit for second dimensionelectrophoretic separation. It can accommodate up to six 28 cm SDS-PAGEgels which mirrors the throughput of the IEF100 (6 IPG strips). If desired, theunit will accommodate plates of similar size made by other manufacturers.Technical SpecificationsGel Plate Size . . . . . . . . . . . . . 28 x 21 cm (w x h)Gel Size . . . . . . . . . . . . . . . . . . 25 x 20 cm (w x h)Maximum Power Settings . . . . . 600 V, 1000 mA, 150 WMaximum Temperature . . . . . . . 45°CHumidity . . . . . . . . . . . . . . . . . . Up to 80%Unit Dimensions (w x h x d) . . . . 43 x 43 x 20 cmSE900 Rating . . . . . . . . . . . . . . . 100-240 V, 50-60 Hz, 2ABuffer Pump . . . . . . . . . . . . . . . . 50,000 hour pump lifeWeight . . . . . . . . . . . . . . . . . . . . 13.6 kgSafety Certifications . . . . . . . . . . EN61010-1, UL61010-1, CSA22.2 1010.1, CEOrdering InformationCat # DescriptionSE900-1.0 Large Format Vertical Electrophoresis Unit, CompleteSE900 Large Format Vertical Electrophoresis Unit, BasicComplete Unit Includes:• Separation Tank• Tubing Kit• Lid with High Voltage Leads• Multiple Gel Caster• Internal PAGE Rack• Hinged Glass Cassettes–6 pcsBasic Unit Includes: The same as above without the multiple gel caster and hingedglass cassettes.Accessories and Replacement PartsCat. #DescriptionSE9102-1-1.0 Hinged Glass Cassette, 28 x 21 cm, 1 mm thickSE915Large Format PAGE Multiple Gel Casterfor Use with SE9102 CassettesSE252Caster Clamps pk/4SE914 Gel Plate Rack, for Holding up to 14Large Formal Gel CassettesSE908Tubing KitSE6056-HV Replacement High Voltage LeadsPS12-25 Replacement Power Pack for Buffer PumpSE9056Replacement Lid with High Voltage LeadsSE9054Internal PAGE RackSE9150Lower Buffer Chamber (tank) w/pump assemblySE917Drain FiltersSE1514Wonder WedgeSE913Separator SheetsSE912Space Saver PlateSE6070Gel Seal

SE660 Tall StandardDual Cooled Vertical UnitTaller format accommodates 24 cm longgels for increased resolutionTechnical SpecificationsGlass Plate Size (w x h) . . . . . . . 18 x 24 cm, 18 x 16 cm or 18 x 8 cmSpacers . . . . . . . . . . . . . . . . . . . 0.75 mm, 1.0 mm, 1.5 mmMaximum Power Settings . . . . . . 1000 V, 500 mA, 50 WMaximum Temperature . . . . . . . 45°CIndoor Use . . . . . . . . . . . . . . . . . 4-40°CHumidity . . . . . . . . . . . . . . . . . . Up to 80%Unit Dimensions (w x h x d) . . . . 32 x 37 x 14 cmSafety Certifications . . . . . . . . . . EN61010-1, UL61010-1, CSA C22.2 1010.1, CEOrdering InformationCat. #SE660-15-1.5Includes:• Lower Buffer Chamber• Upper Buffer Chamber• Safety Lid w/High Voltage Leads• Heat Exchanger• Glass Plates 18 x 24 cm–6 pcs• Clamp Assemblies, 8 cm–4 pcs• Clamp Assemblies, 16 cm–4 pcs• Cams–6 pcs• Slotted Gaskets for Upper BufferChamber–2 pcsOrdering InformationCat. #SE660DescriptionTall Standard Dual Cooled VerticalElectrophoresis Unit, CompleteDescriptionTall Standard Dual Cooled VerticalElectrophoresis Unit, Basic• Dual Gel Casting Stand withLeveling Base• Bubble Level• Laminated Gaskets for Caster–2 pcs• Buffer Dam• Spacer-Mate–Alignment Template• Wonder Wedge–Plate Separation Tool• Gel Seal• Combs, 15-well, 1.5 mm thick–2 pcs• Spacers, 1.5 mm thick (2 cm wide)–4 pcsBasic Unit Includes: The same as above without the combs and spacers. Order twoSE511 combs and two sets of 24 cm long spacers separately, see page 30.AdvantagesMaximum glass plate size 18 x 24 cmProduce straight lanes and sharp,well-defined bandsRun up to four gels (maximum112 samples) at one time underidentical conditionsRun gels at uniform temperaturefrom 1 to 45°CAccommodates denaturing andnative polyacrylamide gels and2-D electrophoresisA wide array of accessories allowsyou to tailor gel configurations toyour needs (see page 30)PROTEIN ELECTROPHORESIS

SE600X Chroma DeluxeDual Cooled Vertical UnitErgonomic design offers easier handlingand sample introductionTechnical SpecificationsGlass Plate Size (w x h) . . . . . 18 x 16 cm or 18 x 8 cmSpacers . . . . . . . . . . . . . . . . . . 0.75 mm, 1.0 mm, 1.5 mmMaximum Power Settings . . . . 1000 V, 500 mA, 50 WMaximum Temperature . . . . . . . 45°CIndoor Use . . . . . . . . . . . . . . . . . 4-40°CHumidity . . . . . . . . . . . . . . . . . . Up to 80%Unit Dimensions (w x h x d) . . . . 32 x 29 x 14 cmSafety Certifications . . . . . . . . . . EN61010-1, UL61010-1, CSA C22.2 1010.1, CEPROTEIN ELECTROPHORESISAdvantagesMaximum glass plate size 18 x 16 cmGels are fully submerged forgreater temperature equilibrationProduces straight lanes and sharp,well-defined bandsRun up to four gels (maximum112 samples) at one time underidentical conditionsAccommodates denaturing andnative polyacrylamide gels, andthe second-dimension of2-D electrophoresisRun gels at uniform temperaturefrom 1 to 45°CA wide array of accessoriesenables you to tailor gelconfigurations to your needs(see page 30)Ordering InformationCat. #SE600X-15-1.5DescriptionDeluxe Dual Cooled VerticalElectrophoresis Unit, CompleteIncludes:• Lower Buffer Chamber• Upper Buffer Chamber• Safety Lid w/High Voltage Leads• Heat Exchanger• Glass Plates 18 x 16 cm–6 pcs• Clamp Assemblies, 16 cm–4 pcs• Cams – 6 pcs• Slotted Gaskets for Upper BufferChamber–2 pcs• Dual Gel Casting Stand with Leveling BaseCat. #SE600XDescriptionDeluxe Dual Cooled VerticalElectrophoresis Unit, Basic• Bubble Level• Laminated Gaskets for Caster–2 pcs• Buffer Dam• Spacer-Mate–Alignment Template• Wonder Wedge–Plate Separation Tool• Gel Seal• Combs, 15-well, 1.5 mm thick–2 pcs• Spacers, 1.5 mm thick (2 cm wide)–4 pcsBasic Unit Includes: The same as above without the combs and spacers. Order twoSE511 combs and two sets of 16 cm long spacers separately, see page 30.

SE600 StandardDual Cooled Vertical UnitHoefer pioneered the vertical formatfor electrophoresis separationsTechnical SpecificationsGlass Plate Size (w x h) . . . . . . 18 x 16 cm or 18 x 8 cmSpacers . . . . . . . . . . . . . . . . . . 0.75 mm, 1.0 mm, 1.5 mmMaximum Power Settings . . . . 1000 V, 500 mA, 50 WMaximum Temperature . . . . . . 45°CIndoor Use . . . . . . . . . . . . . . . 4-40°CHumidity . . . . . . . . . . . . . . . . . Up to 80%Unit Dimensions (w x h x d) . . 32 x 29 x 14 cmSafety Certifications . . . . . . . . . EN61010-1, UL61010-1, CSA C22.2 1010.1, CEOrdering InformationCat. #DescriptionSE600-15-1.5 Standard Dual Cooled VerticalElectrophoresis Unit, CompleteComplete Unit Includes:• Lower Buffer Chamber• Bubble Level• Upper Buffer Chamber• Laminated Gaskets for Caster–2 pcs• Safety Lid w/High Voltage Leads• Buffer Dam• Heat Exchanger• Spacer-Mate–Alignment Template• Glass Plates 18 x 16 cm–6 pcs• Wonder Wedge–Plate Separation Tool• Clamp Assemblies, 16 cm–4 pcs• Gel Seal• Cams–6 pcs• Combs, 15-well, 1.5 mm thick–2 pcs• Slotted Gaskets for Upper Buffer• Spacers, 1.5 mm thick (2 cm wide)–4 pcsChamber–2 pcs• Dual Gel Casting Stand with Leveling BaseCat. #SE600DescriptionStandard Dual Cooled VerticalElectrophoresis Unit, BasicBasic Unit Includes: The same as above without the combs and spacers. Order twoSE511 combs and two sets of 16 cm long spacers separately, see page 30.AdvantagesMaximum glass plate size 18 x 16 cmProduce straight lanes and sharp,well defined bandsRun up to four gels (maximum112 samples) at one time underidentical conditionsRun gels at uniform temperaturefrom 1 to 45°CAccommodates denaturing andnative polyacrylamide gelsand 2-D electrophoresisA wide array of accessories allowsyou to tailor gel configurations toyour needs (see page 30)PROTEIN ELECTROPHORESIS

SE640 Wide-Mini VerticalElectrophoresis UnitExtra wide format ideal for quick,high throughput runsTechnical SpecificationsGlass Plate Size (w x h) . . . . 18 x 8 cmSpacers . . . . . . . . . . . . . . . . 0.75 mm, 1.0 mm, 1.5 mmMaximum Power Settings . . . 1000 V, 500 mA, and 50 WMaximum Temperature . . . . 45°CIndoor Use . . . . . . . . . . . . . . . . . 4-40°CHumidity . . . . . . . . . . . . . . . . . . Up to 80%Unit Dimensions (w x h x d) . . . . 32 x 29 x 14 cmSafety Certifications . . . . . . . . . . EN61010-1, CSA C22.2 1010.1, CEPROTEIN ELECTROPHORESISAdvantagesMaximum glass plate size 18 x 8 cmPermits rapid screening of up to112 samples at one timeDesign permits gels to besurrounded uniformly by buffer soheat dissipation is efficient. Bandsare sharp and lanes are straightAccommodates denaturing ornative polyacrylamide gelsRun up to four second dimensiongels using IEF strips or tube gelsOrdering InformationCat. #SE640-15-1.5DescriptionWide-Mini Vertical Electrophoresis Unit, CompleteComplete Unit Includes:• Lower Buffer Chamber• Upper Buffer Chamber• Safety Lid w/High Voltage Leads• Glass Plates 18 x 8 cm–6 pcs• 8 cm Clamp Assemblies–4 pcs• Cams–6 pcs• Dual Casting Stand w/Leveling Base• Laminated Gaskets for Casting Stand–2 pcsCat. #SE640• Slotted Gaskets for Upper BufferChamber–2 pcs• Buffer Dam• Spacer-Mate–Alignment Template• Wonder Wedge–Plate Separation Tool• Gel Seal• Bubble Level• Combs, 15-well, 1.5 mm thick–2 pcs• 1.5 mm Thick Spacers (2 cm wide)–4 pcsDescriptionWide-Mini Vertical Electrophoresis Unit, BasicBasic Unit Includes: The same as above without the combs and spacers. Order twoSE511 combs and two sets of 8 cm long spacers separately, see page 30.

SE410 Tall Air-CooledVertical Electrophoresis UnitCompact, rugged, and economical units ideal foreducational laboratories with multiple usersTechnical SpecificationsGlass Plate Size (w x h) . . . . . . . 18 x 24 cmSpacers . . . . . . . . . . . . . . . . . . . 0.75 mm, 1.0 mm, 1.5 mmMaximum Power Settings . . . . . . 500 V, 60 mA, 20 WMaximum Temperature . . . . . . . 45°CIndoor Use . . . . . . . . . . . . . . . . . 4-40°CHumidity . . . . . . . . . . . . . . . . . . Up to 80%Unit Dimensions (w x h x d) . . . . 24 x 36 x 15 cmSafety Certifications . . . . . . . . . . EN61010-1, UL3101-1, CSA C22.2 1010.1, CEOrdering InformationCat. #SE410-15-1.5Includes:• Lower Buffer Chamber/CastingStand on Leveling Base with HighVoltage Leads• Upper Buffer Chamber• Safety Lid with Electrodes• Glass Plates, 18 x 24 cm–2 pcs• Clamp Assemblies, 8 cm–2 pcs• Clamp Assemblies, 16 cm–2 pcsCat. #SE410DescriptionTall Air-Cooled VerticalElectrophoresis Unit, CompleteDescriptionTall Air-Cooled VerticalElectrophoresis Unit, Basic• Cams–2 pcs• Slotted Gasket for Upper Buffer Chamber• Bubble Level• Laminated Gasket for Casting Stand• Spacer-Mate–Alignment Template• Wonder Wedge–Plate Separation Tool• Gel Seal• Comb, 15-well, 1.5 mm thick• Spacers, 1.5 mm thick (2 cm wide)–2 pcsBasic Unit Includes: The same as above without the combs and spacers. Order oneSE511 comb and one set of 24 cm long spacers separately, see page 30.AdvantagesMaximum glass plate size 18 x 24 cmThe rugged injection moldedconstruction is durable andassembles easilyRun two gels with the addition ofa divider plate (see page 22)Built-in casting stand seals leak freeChoose from a wide variety ofaccessories (see page 30)Plates, clamps, spacers, and combsare interchangeable with theSE600 SeriesPROTEIN ELECTROPHORESIS

SE400 Air-CooledVertical Electrophoresis UnitCompact, rugged, and economical units ideal foreducational laboratories with multiple usersTechnical SpecificationsGlass Plate Size (w x h) . . . . . 18 x 16 cmSpacers . . . . . . . . . . . . . . . . . 0.75 mm, 1.0 mm, 1.5 mmMaximum Power Settings . . . . 500 V, 60 mA, 20 WMaximum Temperature . . . . . 45°CIndoor Use . . . . . . . . . . . . . . . 4-40°CHumidity . . . . . . . . . . . . . . . . Up to 80%Unit Dimensions (w x h x d) . 24 x 28 x 15 cmSafety Certifications . . . . . . . . EN61010-1, UL3101-1, CSA C22.2 1010.1, CEPROTEIN ELECTROPHORESISAdvantagesMaximum glass plate size 18 x 16 cmThe rugged injection moldedconstruction is durable andassembles easilyRun two gels with the addition of adivider plate (see page 22)Built-in casting stand seals leak freeChoose from a wide variety ofaccessories (see page 30)Plates, clamps, spacers, and combsare interchangeable with theSE600 SeriesOrdering InformationCat. #SE400-15-1.5DescriptionAir-Cooled Vertical Electrophoresis Unit, CompleteComplete Unit Includes:• Lower Buffer Chamber/Casting Standon Leveling Base with High Voltage Leads• Upper Buffer Chamber• Safety Lid with Electrodes• Glass Plates, 18 x 16 cm–2 pcs• Clamp Assemblies, 16 cm–2 pcs• Cams–2 pcsCat. #SE400• Slotted Gasket for Upper Buffer Chamber• Bubble Level• Laminated Gasket for Casting Stand• Spacer-Mate–Alignment Template• Wonder Wedge–Plate Separation Tool• Gel Seal• Comb, 15-well, 1.5 mm thick• Spacers, 1.5 mm thick (2 cm wide)–2 pcsDescriptionAir-Cooled Vertical Electrophoresis Unit, BasicBasic Unit Includes: The same as above without the combs and spacers. Order oneSE511 comb and one set of 16 cm long spacers separately, see page 30.

SE300 miniVE Integrated VerticalElectrophoresis and Blotting UnitPerform both electrophoresis and electro transferin one sturdy, compact unitTechnical InformationGlass Plate Size (w x h) . . . . . . . 10 x 10.5 cm or 10 x 8 cmSpacers . . . . . . . . . . . . . . . . . . . . 0.75 mm, 1.0 mm, 1.5 mmMaximum Power Settingsfor Electrophoresis . . . . . . . . . . . 500 V and 25 W per modulefor Blotting . . . . . . . . . . . . . . . . . 400 mA and 15 W per moduleMaximum Temperature . . . . . . . . 45°CIndoor Use . . . . . . . . . . . . . . . . . 4-40°CHumidity . . . . . . . . . . . . . . . . . . Up to 80%Unit Dimensions (w x h x d) . . . . 19.2 x 17.2 x 18.8 cmSafety Certifications . . . . . . . . . . EN61010-1, UL61010A-1, CSA C22.2 1010.1, CEOrdering InformationCat. #SE300-10A-1.0Complete Unit Includes:• Lower Buffer Chamber (tank)• Gel Modules with Gaskets–2 assemblies• Safety Lid with High Voltage Leads• Glass Plates, Rectangular,10 x 10.5 cm–3 pcsCat. #SE300DescriptionminiVE Integrated VerticalElectrophoresis Unit, CompleteDescriptionminiVE Integrated VerticalElectrophoresis Unit, Basic• Glass Plates, Notched, 10 x 10.5 cm–3 pcs• Combs, 10-well, 1.0 mm thick–2 pcs• T-Spacers, 1.0 mm thick–4 pcs• Well-Locating Decals–2 pcs• Wonder Wedge Plate Separation Tool• Gel SealAdvantagesQuick, excellent results usingminimal bufferPassive cooling produces gels withstraight lanes and sharp bandsCast your own or use precast gelsfrom a variety of manufacturersTransfer up to 4 gels in 45 minuteswith only 300 ml buffer usingoptional SE302 Blot ModulesDesigned for use with a widevariety of precast gelsPROTEIN ELECTROPHORESISBasic Unit Includes: The same as above without the combs, spacers, and glass plates.Order two SE211A combs, two sets of 10.5 cm long spacers, and 10 x 10.5 cmrectangular and notched glass plates separately, see pages 20 and 29.Cat. #SE302Includes:• Blot Module• Blotter Paper–25 sheetsDescriptionminiVE Blot Module• Dacron Sponges, 6 mm thick–4 pcsT

SE260 Mighty Small II Deluxe MiniVertical Electrophoresis UnitCombines the advantages of small format andefficient cooling for rapid screening of proteinsand nucleic acidsTechnical SpecificationsGlass Plate Size (w x h) . . 10 x 10.5 cm or 10 x 8 cmSpacers . . . . . . . . . . . . . . 0.75 mm, 1.0 mm, 1.5 mmMaximum Power Settings . 500 V, 500 mA, 12 WMaximum Temperature . . . . 45°CIndoor Use . . . . . . . . . . . . . . 4-40°CHumidity . . . . . . . . . . . . . . . . Up to 80%Unit Dimensions (w x h x d) . . . 16.5 x 18 x 16 cmSafety Certifications . . . . . . . . . EN61010-1, UL61010A-1, CSA C22.2 1010.1, CEPROTEIN ELECTROPHORESISAdvantagesMaximum glass plate size 10 x 10.5 cmFlexible design, additionally able toaccommodate 10 x 8 cm formatwith optional accessoriesSupports a wide variety ofprecast gelsEfficient active cooling ensuressharp bandsRun up to two gels (maximum30 samples) at one time underidentical conditionsQuick and easy to assembleChoose from a wide variety ofaccessories (see page 31)Ordering InformationCat. #SE260-10A-.75Complete Unit Includes:• Lower Buffer Chamber• Upper Buffer Chamber/Cooling Core• Safety Lid with High Voltage Leads• Casting Cradle w/Sealing Gasket Set• Casting Clamp Assemblies–2 pcs• Cams–4 pcs• Glass Plates, Rectangular,10 x 10.5 cm–10 pcsCat. #SE260-10A-1.5Cat. #SE260BDescriptionMighty Small II Deluxe MiniVertical Electrophoresis Unit, Complete• Alumina Plates, Notched,10 x 10.5 cm–5 pcs• Spring Clamps–4 pcs• Combs, 10 well, 0.75 mm thick–2 pcs• T-Spacers, 0.75 mm thick–4 pcs• Well Locating Decals–2 pcs• Gel SealDescriptionMighty Small II Deluxe MiniVertical Electrophoresis Unit, CompleteComplete Unit Includes: The same as above with 1.5 mm thick combs and spacers.DescriptionMighty Small II Deluxe MiniVertical Electrophoresis System, BasicBasic Unit Includes: The same as above without the combs, spacers, plates, and caster.Order two SE211A combs, two sets of 10.5 cm long spacers, 10 x 10.5 cm rectangularglass and notched alumina plates, and a gel caster, see pages 20, 22 and 31.

SE250 Mighty Small II MiniVertical Electrophoresis UnitDesigned for quick screening and rapid separationTechnical SpecificationsGlass Plate Size (w x h) . . . . . . . 10 x 8 cmSpacers . . . . . . . . . . . . . . . . . . . 0.75 mm, 1.0 mm, 1.5 mmMaximum Power Settings . . . . . 500 V, 500 mA, 12 WMaximum Temperature . . . . . . . 45°CIndoor Use . . . . . . . . . . . . . . . . 4-40°CHumidity . . . . . . . . . . . . . . . . . Up to 80%Unit Dimension (w x h x d) . . . . 16.5 x 16 x 16 cmSafety Certifications . . . . . . . . . EN61010-1, UL61010A-1, CSA C22.2 1010.1, CEOrdering InformationCat. #SE250-10A-.75Complete Unit Includes:• Lower Buffer Chamber• Upper Buffer Chamber/Cooling Core• Safety Lid with High Voltage Leads• Casting Cradle w/Sealing Gasket Set• Casting Clamp Assemblies–2 pcs• Cams–4 pcs• Glass Plates, Rectangular,10 x 8 cm–10 pcsCat. #SE250DescriptionMighty Small II Mini VerticalElectrophoresis Unit, CompleteDescriptionMighty Small II Mini VerticalElectrophoresis Unit, Basic• Alumina Plates, Notched, 10 x 8 cm–2 pcs• Spring Clamps–4 pcs• Combs, 10 well, 0.75 mm thick–2 pcs• T-Spacers, 0.75 mm thick–4 pcs• Well locating Decals–2 pcs• Gel SealBasic Unit Includes: The same as above without the combs, spacers, and caster.Order two SE211A combs, two sets of 8 cm long spacers, and a gel caster, see pages 20and 31.AdvantagesMaximum glass plate size 10 x 8 cmEfficient active cooling ensuressharp bandsQuick and easy to assembleRequires minimal bufferEasily upgradable to the SE260 (withoptional accessories) resulting in theadditional capability of accommodatingboth 10 x 8 and 10 x 10.5 cmgels, enabling a wider variety ofprecast gel optionsChoose from a wide variety ofaccessories (see page 31)PROTEIN ELECTROPHORESIS

SQ33 SequencerIdeal for high resolution techniques whichrequire a longer separation distanceThe Hoefer SQ33 Sequencer offers a wide gel format for increased samplecapacity and Shark’s Tooth combs to ensure optimal band resolution. The SQ33Sequencer is perfect for DNA sequencing, DNase and RNasefootprinting, and heteroduplex or oligonucleotide analysis. Theremovable lower buffer chamber combined with the upper bufferchamber drainage tap make buffer disposal easy and safe.PROTEIN ELECTROPHORESISFeatures and BenefitsAluminum back plate–serves as a heatsink to prevent band distortionSpring-loaded plate clamps–act inconjunction with counterbalancedgaskets to maintain uniform gelthickness and even distribution ofpressureVentilation grille–aids in heatdispersal during electrophoresis andcan be replaced by the optionalthermostatic fan kitOptional Fan Sensor Kit–anadjustable, thermostaticallycontrolled fan kit powered independentlyto maintain gel temperatureTechnical SpecificationsGlass Plate Size (w x h) . . . . . . . . . . . . . . 33 x 41 cmSpacers . . . . . . . . . . . . . . . . . . . . . . . . . . 0.35 mmMaximum Power Settings . . . . . . . . . . . . 1000 V, 100 mA, and 55 WMaximum Temperature . . . . . . . . . . . . . . 45°CIndoor Use . . . . . . . . . . . . . . . . . . . . . . . 4-40°CHumidity . . . . . . . . . . . . . . . . . . . . . . . . . Up to 80%Unit Dimensions (w x h x d) . . . . . . . . . . 63 x 50 x 21.5 cmOrdering InformationCat. #SQ33Complete Unit Includes:• Single plate vertical gelelectrophoresis unit• Lower Buffer Chamber• Upper Buffer Chamber• Safety Lid w/High Voltage LeadsDescriptionSQ33 Sequencer, Complete• Glass Plates, Rectangular, 33 x 41 cm–2 pcs• Glass Plates, Notched, 33 x 41 cm–2 pcs• Spacers, 0.35 mm thick–2 pcs• Comb, 48-well Shark’s Tooth, 0.35 mm thickT

SQ33 Sequencer Accessoriesand Replacement PartsShark’s Tooth CombsCat. # # of Wells Thickness Well Width Well Depth Well Volume(mm) (mm) (mm) (µl per 1 mm depth)SQ33-C35-48K 48 0.35 3 10 5SQ33-C35-60KMC 60* 0.35 2.5 10 4SQ33-C35-96K 96 0.35 2.5 9 3.5Standard CombsCat. # # of Wells Thickness Well Width Well Depth Well Volume(mm) (mm) (mm) (µl per 1 mm depth)SQ33-C35-40 40 0.35 4 5 7SQ33-C35-60MC 60* 0.35 2 5 3.5*Microtiter spacing for use with a multichannel pipetteAccessories and Replacement PartsCat. #SQ33-GPLTSQ33-NGPLTSQ33-SPSQ33-HS-115VSQ33-HS-230VOptional Fan Sensor KitDescriptionGlass Plates, Rectangular, 33 x 41 cm–2 pcsGlass Plates, Notched, 33 x 41 cm–2 pcsSpacers, 0.35 mm thick–2 pcsFan Sensor Kit, 115 VACFan Sensor Kit, 230 VAC• Comprised of a fan operated by an independently powered heat sensortemperature control unit• Gel temperature is set by manual adjustment of the dial on the front panelof the control unit• Fan is screwed onto the lid of the SQ33 in place of the ventilation grill• Fan is activated within 4°C of the preset temperaturePROTEIN ELECTROPHORESISTechnical SpecificationsUnit Dimensions (w x h x d) . . . . . . . . . 9.6 x 8 x 14 cmTemperature Control Range . . . . . . . . . 0 - 100°CTemperature Control Accuracy . . . . . . . ±2%Fan Dimensions (w x h x d) . . . . . . . . . 12 x 3.8 x 12 cmFan Operating Speed . . . . . . . . . . . . . . 2700 rpmFlow Rate . . . . . . . . . . . . . . . . . . . . . . . >84 CFMNoise Rating . . . . . . . . . . . . . . . . . . . . . 36 dBA

Vertical ElectrophoresisCaster Selection GuideVertical UnitSE250 SE260 miniVE SE400 SE410 SE640 SE600 SE600X SE660Glass Plate Size(W x H)10x8 cm10x10.5 cm 18x8 cm 18x16 cm18x24 cmPROTEIN ELECTROPHORESISGel Capacity1-21-4SE2751-101-2SE2451-4 1-4* 1-4* 1-4 1-10 1-4*CasterSE245SE215 SE235 SE6015 SE6015 SE675 SE615 SE6015*With optional divider plate

Gel Casters for SE600 and SE400Series Vertical Electrophoresis UnitsEnables several gradient or homogenous gels to becast simultaneouslyMultiple Gel Casters• SE675 casts up to four 16 cm long gels• SE615 casts up to ten 16 cm long gels• Easy to use and leak free• Cast homogenous or gradient gels–Pour homogenous gels directly into the topof the casting chamber; pump gradient gels through an inlet port at the bottomSE675Ordering InformationCat. #SE675SE615Includes:• Caster Body with Gasket• Face Plate• Clamps–4 pcs• Glass Plates• Filter Sheets–5 pcs• Wax Paper–100 Sheets, PrecutDescriptionFour Gel CasterIncludes Glass Plates, 18 x 16 cm–8 pcsTen Gel CasterIncludes Glass Plates, 18 x 16 cm–20 pcsOrder SE511 combs and sets of spacers separately, see page 30.• Spacer-Mate–Alignment Template• Thumbscrews–2 pcs• Filler Plug Set• Black Vinyl Cap• Gel Seal• Bubble LevelDual Gel CasterSE6015 Dual Gel Caster is included when you order an SE600 Series unit.It can also be ordered separately.• Casts two 8, 16, or 24 cm long gels at a time• Double the capacity with optional divider plates (see page 22)• Easy to use and leak free• Glass sandwiches seal into the casting cradle with a simple twist of the camsSE615PROTEIN ELECTROPHORESISOrdering InformationCat. #DescriptionSE6015Dual Gel CasterIncludes:• Caster Stand with 2 Cradles and• Laminated Gaskets–2 pcsLeveling FeetOrder glass plates, SE511 combs and sets of spacers separately, see pages 22 and 30.SE6015

Gel Casters–Small FormatVertical ElectrophoresisEnables several gradient or homogenous gelsto be cast simultaneouslyMultiple Gel Casters• Pour uniform gels from the top; pump gradient gels into an inlet port atthe bottom of the unit• Sandwiches fill at the same time at the same rate from the same solution.The result: identical gels.• Glass plate sandwiches seal leak free without the use of messy grease or tape• Once cast, gels can be wrapped in plastic and refrigerated for several weeksPROTEIN ELECTROPHORESISOrdering InformationCat. #SE215SE275SE235All three above include:• Caster Body with Gasket• Face Plate with Inlet Port• Rectangular Glass Plates–size and qty variesDescriptionTen Gel Caster for 10 x 8 cm platesIncludes: 10 x 8 cm Rectangular Glass Plates–20 pcs10 x 8 cm Notched Alumina Plates–10 pcsSpring Clamps–2 pcsFour Gel Caster for 10 x 8 cm platesIncludes: 10 x 8 cm Rectangular Glass Plates–10 pcs10 x 8 cm Notched Alumina Plates–4 pcsSpring Clamps–2 pcsFour Gel Caster for 10 x 10.5 cm platesIncludes: 10 x 10.5 cm Rectangular Glass Plates–5 pcs10 x 10.5 cm Notched Alumina Plates–4 pcsSpring Clamps–4 pcs• Notched Alumina Plates–size and qty varies• Spring Clamps–qty varies• Wax Paper–100 sheetsOrder SE211A combs and spacers separately, see page 31.Dual Gel Caster• Cast one or two gels• Accommodates both 10 x 8 cm and 10 x 10.5 cm plates• Uses the same rugged and effective clamp/cam casting method asused with the SE600 and SE400 Series casters• Space-Saver Plate• Polycarbonate FillerSheets–5 pcs• Black Vinyl Cap• Filler Plug SetOrdering InformationCat. #DescriptionSE245Dual Gel CasterIncludes:• Casting Cradle• Casting Clamp Assemblies–2 pcs• Sealing Gasket Set• Cams–4 pcsOrder glass plates, SE211A combs, and spacers separately, see pages 22 and 31.

Vertical Gel CasterReplacement PartsMultiple Gel CastersSE275 SE215 SE235 SE675 SE615Wax Paper (100/pk) SE201 SE201 SE231 SE614 SE614PolycarbonateFiller Sheets (5/pk)SE213 SE213 SE233 SE613 SE613Space-Saver Plate SE217 SE217 SE237 SE612 SE612Face Plate SE218 SE218 SE238 SE616-2 SE616-2Filler Plug Set SE279 SE209 SE279 SE678 SE618Foam Gasket (61 cm) SE208 SE208 SE208 SE208 SE208Spring Clamps (4/pk) SE252 SE252 SE252 SE253 SE253Red Inlet/Outlet Fitting XPO10 XPO10 XPO10 XPO10 XPO10Dual Gel CastersSE245 SE6015Sealing Gasket–2/pk SE246 SE6009Cams–4/pk SE6005L SE6005LCasting Clamp Assembly–1 each SE249 N/ACasting Clamp Assemblies–1 pair N/A 18 x 8 cm: SE6403U18 x 16 cm: SE6003UPROTEIN ELECTROPHORESISThumbscrews–12/pk SE6003U-2 SE6003U-218 x 24 cm: SE6403U and SE6003USee page 27 for SE400 Series caster replacement parts.

SE6602, SE6602LFSE6602DSE6402, SE6402LFSE6402DSE6102, SE6102LFSE6102DGlass Plates:For SE660, SE600X Chroma, SE600, SE640, SE410,and SE400Ordering InformationCat. #SE6402SE6402LFSE6402DSE6102SE6102LFSE6102DSE6602SE6602LFSE6602DDescription18 x 8 cm Regular–2 pcs18 x 8 cm Low Fluorescence–2 pcs18 x 8 cm Divider Plate, Notched18 x 16 cm Regular–2 pcs18 x 16 cm Low Fluorescence–2 pcs18 x 16 cm Divider Plate, Notched18 x 24 cm Regular–2 pcs18 x 24 cm Low Fluorescence–2 pcs18 x 24 cm Divider Plate, NotchedPROTEIN ELECTROPHORESISSE202P-10SE202GN-5SE262P-5 SE262GN-5Divider Plates Double Gel CapacityRun as many as four 0.75, 1.0, or 1.5 mm thick gels on SE600Series units and two gels on the SE400 Series at one time underidentical conditions.How it works: Insert a divider plate between the glass plates thatmake up a single gel sandwich. Place spacers on each side of thedivider plate to form two gel cavities for pouring gels. This two gel“club sandwich” fits into the same casting stand and seals perfectly.Glass and Alumina Plates:For miniVE , SE260, and SE250Glass PlatesOrdering InformationCat. #SE202P-10SE202GN-5SE262P-5SE262GN-5Description10 x 8 cm Rectangular Glass Plates–10 pcs10 x 8 cm Notched Glass Plates–5 pcs10 x 10.5 cm Rectangular Glass Plates–5 pcs10 x 10.5 cm Notched Glass Plates–5 pcsSE202NSE202N-10SE262N-5Alumina Plates (not recommended for use with miniVE)Ordering InformationCat. #DescriptionSE202N10 x 8 cm Notched Alumina PlateSE202N-1010 x 8 cm Notched Alumina Plates–10 pcsSE262N-510 x 10.5 cm Notched Alumina Plates–5 pcs

SE660 VerticalElectrophoresisSystemReplacement PartsSE6005LCamsSE6403U8 cm Clamp AssemblyGlass Plates(see page 22)SE6056-HVHigh Voltage LeadsSE6056Lid w/High Voltage LeadsSE6054Upper Buffer ChamberSE6008BSlotted GasketSE6032Buffer DamSE6003U16 cm Clamp AssemblyOrdering InformationCat. #SE6056SE6056-HVSE6005LSE6054SE6008BSE6032SE6403USE6003USE6003UKSE6160SE6650SE6160Heat ExchangerSE6650Lower Buffer ChamberDescriptionLid for SE660 w/High Voltage LeadsHigh Voltage LeadsCams–4 pcsUpper Buffer Chamber for SE600 SeriesSlotted Gaskets–2 pcs for Upper Buffer ChamberBuffer DamClamp Assembly 8 cm–2 pcsClamp Assembly 16 cm–2 pcsClamp and Cam KitIncludes: Clamp Assembly 16 cm–4 pcsCams–8 pcsHeat Exchanger for SE600 SeriesLower Buffer Chamber for SE660PROTEIN ELECTROPHORESIS

SE6056-HVHigh Voltage LeadsSE6056XLid w/High Voltage LeadsSE6054Upper Buffer ChamberSE6005LCamsSE600X ChromaElectrophoresisSystemReplacement PartsSE6008BSlotted GasketSE6032Buffer DamGlass Plates(see page 22)SE6003U16 cm Clamp AssemblyPROTEIN ELECTROPHORESISOrdering InformationCat. #SE6056XSE6056-HVSE6005LSE6054SE6008BSE6032SE6003USE6003UKSE6160SE6150XSE6160Heat ExchangerSE6150XLower Buffer ChamberDescriptionLid for SE600X Chroma w/High Voltage LeadsHigh Voltage LeadsCams–4 pcsUpper Buffer Chamber for SE600 SeriesSlotted Gaskets–2 pcs for Upper Buffer ChamberBuffer DamClamp Assembly 16 cm–2 pcsClamp and Cam KitIncludes: Clamp Assembly 16 cm–4 pcsCams–8 pcsHeat Exchanger for SE600 SeriesLower Buffer Chamber for SE600X Chroma

SE600 VerticalElectrophoresisSystemReplacement PartsSE6005LCamsSE6056-HVHigh Voltage LeadsSE6056Lid w/High Voltage LeadsSE6054Upper Buffer ChamberSE6008BSlotted GasketSE6032Buffer DamGlass Plates(see page 22)SE6003U16 cm Clamp AssemblySE6160Heat ExchangerSE6150Lower Buffer ChamberOrdering InformationCat. #SE6056SE6056-HVSE6005LSE6054SE6008BSE6032SE6003USE6003UKSE6160SE6150DescriptionLid for SE600 w/High Voltage LeadsHigh Voltage LeadsCams–4 pcsUpper Buffer Chamber for SE600 SeriesSlotted Gaskets–2 pcs for Upper Buffer ChamberBuffer DamClamp Assembly 16 cm–2 pcsClamp and Cam KitIncludes: Clamp Assembly 16 cm–4 pcsCams–8 pcsHeat Exchanger for SE600 SeriesLower Buffer Chamber for SE600PROTEIN ELECTROPHORESIS

SE640 Wide-MiniElectrophoresis SystemReplacement PartsSE6056-HVHigh Voltage LeadsSE6056Lid w/High Voltage LeadsSE6454Upper Buffer ChamberPROTEIN ELECTROPHORESISSE6005LCamsSE6432Buffer DamOrdering InformationCat. #SE6056SE6056-HVSE6005LSE6454SE6008BSE6432SE6403USE6450Glass Plates(see page 22)SE6008BSlotted GasketSE6403U8 cm Clamp AssemblySE6450Lower Buffer ChamberDescriptionLid w/High Voltage LeadsHigh Voltage LeadsCams–4 pcsUpper Buffer Chamber w/Dual Electrode AssemblySlotted Gaskets–2 pcs for Upper Buffer ChamberBuffer DamClamp Assembly 8 cm–2 pcsLower Buffer Chamber for SE640For glass plates, see page 22. For combs and spacers, see page 30.

SE400 andSE410 VerticalElectrophoresisSystemsReplacement PartsSE416SE410 LidSE400Glass Plate SandwichSE6003U16 cm Clamp AssemblyGlass Plates(see page 22)SE4156SE400 LidSE6403U8 cm Clamp AssemblySE410Glass Plate SandwichSE4154Upper Buffer ChamberSE4008BSlotted GasketSE4009Laminated GasketOrdering InformationCat. #SE416SE4156SE6056-HVSE6003USE6403USE6005LSE6003UKSE4154SE4008BSE4009SE4151SE4151Lower Buffer Chamber/Casting Stand w/High Voltage LeadsDescriptionSE410 Lid w/ElectrodesSE400 Lid w/ElectrodesHigh Voltage LeadsClamp Assembly 16 cm–2 pcsClamp Assembly 8 cm–2 pcsCams–4 pcsClamp and Cam KitIncludes: Clamp Assembly 16 cm–4 pcsCams–8 pcsUpper Buffer Chamber for SE400 SeriesSlotted Gasket (for Upper Buffer Chamber)Laminated Gasket (for Casting Stand)Lower Buffer Chamber/Casting Standon Leveling Base w/High Voltage LeadsGlass Plates(see page 22)SE6056-HVHigh Voltage LeadsSE6003U16 cm Clamp AssemblyPROTEIN ELECTROPHORESIS

SE300 miniVE Electrophoresis SystemReplacement PartsSE6056-HVHigh Voltage LeadsSE306Lid w/High Voltage LeadsSE208Foam GasketSE314Banana Plug KitSE310Clamp AssemblyPROTEIN ELECTROPHORESISSE311Clamp ScrewsSE312Sealing Plate AssemblySE308Lower Buffer Chamber (tank)Ordering InformationCat. #SE306SE6056-HVSE314SE208SE311SE309SE310SE312SE313SE308DescriptionLid w/High Voltage LeadsHigh Voltage LeadsBanana Plug Kit (2 plugs, 2 nuts, 4 washers)Foam Gasket, 61 cmClamp Screws–5 pcsUpper Buffer Chamber Assembly with Gasket andBanana Plug KitClamp AssemblySealing Plate Assembly (includes Sealing Gasket)Sealing GasketLower Buffer Chamber (tank)SE309Upper Buffer ChamberSE313Sealing Gasket

SE260 and SE250 Small FormatVertical Electrophoresis SystemsReplacement PartsSE6056-HVHigh Voltage LeadsSE212Well Locating DecalSE256Lid w/High Voltage LeadsSE252Spring ClampsOrdering InformationCat. #SE256SE6056-HVSE212SE252SE254BSE250RK-1SE208SE255SE255DSE208Foam GasketDescriptionSE250/SE260 Lid w/High Voltage LeadsHigh Voltage LeadsWell Locating Decal–2 pcsSpring Clamps–4 pcsUpper Buffer Chamber Cooling Core(includes Foam Gasket)Hardware Repair Kit–(2 Banana plugs, 6 Washers,2 Nuts, Teflon® Tubing 3˝ (3 pcs), 4 Acetyl Rivets)Foam Gasket, 61 cmLower Buffer Chamber for SE250Lower Buffer Chamber for SE260SE254BUpper Buffer Chamberw/Foam GasketSE255DSE260 Lower Buffer ChamberSE255SE250 Lower Buffer ChamberPROTEIN ELECTROPHORESIS

PROTEIN ELECTROPHORESIS0.75 mm Thick1.0 mm Thick1.5 mm ThickAll 1.0 mmSpacers are whitefor easy identification.Accessories:CombsOur combs are precision machined from Teflon ® which is highly resistant to acids,bases, and all commonly used buffer systems. An important benefit of Tefloncombs, compared to other types, is that they are easily removed while maintaininggel integrity. They are lightweight and virtually unbreakable when used withreasonable care.Standard Combs come attached to a standard back, which producesmaximum well depths of 25 mm, except for the 28 well combs which producewell depths of 15 mm.Cat. # # of Wells Thickness Well Width Well Volume Qty.(mm) (mm) (µl per 1 mm depth)SE511-10-.75 10 0.75 8.3 6.2 1SE511-10-1.0 10 1.0 8.3 8.3 1SE511-10-1.5 10 1.5 8.3 12.4 1SE511-12-.75 12 0.75 7.6 5.8 1SE511-12-1.0 12 1.0 7.6 7.7 1SE511-12-1.5 12 1.5 7.6 11.5 1SE511-15-.75 15* 0.75 5.7 4.3 1SE511-15-1.0 15* 1.0 5.7 5.7 1SE511-15-1.5 15* 1.5 5.7 8.6 1SE511-20-.75 20 0.75 4.1 3.1 1SE511-20-1.0 20 1.0 4.1 4.1 1SE511-20-1.5 20 1.5 4.1 6.2 1SE511-28-.75 28 0.75 2.7 2.1 1SE511-28-1.0 28 1.0 2.7 2.7 1SE511-28-1.5 28 1.5 2.7 4.1 1SE511-BKA Adjustable Comb Back 1(Converts 25 mm deep comb to 10 or 15 mm depth)*Microtiter spacing for use w/multichannel pipettePreparative Combs have adjustable comb backs (10, 15, and 25 mm depth)and form 1 large preparative well plus 1 or 2 small reference wells.Cat. # # of Wells Thickness Well Width Well Volume Qty.(mm) (mm) (µl per 1 mm depth)SE511-R-.75 1/1 0.75 121/6 90/4 1SE511-R-1.0 1/1 1.0 121/6 120/6 1SE511-R-1.5 1/1 1.5 121/6 183/9 1SE511-DR-.75 1/2 0.75 113/6 85/4 1SE511-DR-1.0 1/2 1.0 113/6 112/6 1SE511-DR-1.5 1/2 1.5 113/6 171/9 1SpacersSE660, SE600X Chroma, SE600,SE640, SE410, and SE400Cat. # Thickness (mm) Length (cm) Width (cm) Qty.SE6419-2-.75 0.75 8 2 2SE6419-2-1.0 1.0 8 2 2SE6419-2-1.5 1.5 8 2 2SE6119-2-.75 0.75 16 2 2SE6119-2-1.0 1.0 16 2 2SE6119-2-1.5 1.5 16 2 2SE6619-2-.75 0.75 24 2 2SE6619-2-1.0 1.0 24 2 2SE6619-2-1.5 1.5 24 2 2SE6118-2-1.0 1.0 16 1 2SE6118-2-1.5 1.5 16 1 2

Accessories: miniVE , SE260, and SE250Ordering InformationStandard CombsStandard combs produce maximum well depths of 13 mm.Cat. # # of Wells Thickness Well Width Well Volume Qty.(mm) (mm) (µl per 1mm depth)SE211A-5-.75 5 0.75 13.0 9.8 1SE211A-5-1.0 5 1.0 13.0 13.0 1SE211A-5-1.5 5 1.5 13.0 19.5 1SE211A-9-1.0 9* 1.0 5.8 5.8 1SE211A-10-.75 10 0.75 4.8 3.6 1SE211A-10-1.0 10 1.0 4.8 4.8 1SE211A-10-1.5 10 1.5 4.8 7.2 1SE211A-12-1.0 12 1.0 4.75 4.75 1SE211A-15-.75 15 0.75 2.9 2.2 1SE211A-15-1.0 15 1.0 2.9 2.9 1SE211A-15-1.5 15 1.5 2.9 4.4 1SE211A-18-1.0 18* 1.0 2.9 2.9 1*Microtiter spacing for use w/multichannel pipettePreparative CombsPreparative Combs form 1 large preparative well plus 1 small reference well.Cat. # # of Wells Thickness Well Width Well Volume Qty.(mm) (mm) (µl per 1mm depth)SE211A-R-.75 1/1 0.75 68/5 51/3.8 1SE211A-R-1.0 1/1 1.0 68.5 68/5 1SE211A-R-1.5 1/1 1.5 68.5 120/7.5 1T-SpacersAll spacers are precision machined from durable plastics for high chemicalresistance and optimum tensile strength.Cat. # Thickness (mm) Length (cm) Width (cm) Qty.SE2119T-2-.75 0.75 8 1 2SE2119T-2-1.0 1.0 8 1 2SE2119T-2-1.5 1.5 8 1 2SE2619T-2-.75 0.75 10.5 1 2SE2619T-2-1.0 1.0 10.5 1 2SE2619T-2-1.5 1.5 10.5 1 21.5 mm Thick1.0 mm Thick0.75 mm ThickAll 1.0 mmT-Spacers are white foreasy identification.PROTEIN ELECTROPHORESISAdditional AccessoriesOrdering InformationCat. #DescriptionSE6070Gel Seal–1/4 oz.SE6003U-2 Clamp Thumbscrews–12 pk (for 8 or 16 cm Clamp)SE6056-HV High Voltage Safety Lead SetSE1514Wonder Wedge Plate Separation ToolSER11Bubble Level

SE100 PlateMate Glass PlateWasher and Storage KitDramatically reduces glass plate lossdue to chipping and cracking• Glass plates fit securely into the plate holders’ grooves for safe washing, rinsing,and storage• Stainless steel handles let you carry plate holders easily and set them safelyinto the washing bath• Accommodates forty 8 cm tall or twenty 18 cm wide places• Holds as many as twenty 10.5 cm tall plates with the optional SE103 long plateadapter accessoryPROTEIN ELECTROPHORESISSE100Technical SpecificationsHolders and AdaptersEach holder can support either ten SE600 series glass plates in the long direction,or twenty SE250 glass plates in the short direction. An optional adapter (includedin the PlateMate Washer and Storage Kit) is available to enable each holder toaccept ten SE260 or miniVE glass plates.Liquid Capacity of Tank7 liters to cover 18 x 16 cm plates (for the SE400, SE600X Chroma or SE600)or 5 liters to cover 10 x 8 cm and/or 10 x 10.5 cm plates (for the SE250, SE260,or miniVE).MaterialsTank and Tank Lid . . . . . . . . . . .High-Density PolyethyleneHolders . . . . . . . . . . . . . . . .PolypropyleneDust Covers . . . . . . . . . . .VinylHandles . . . . . . . . . . . . . .Stainless SteelOperating Conditions . . . .Maximum Temperature 45°CSE103Ordering InformationCat. #SE100SE103SE105DescriptionPlateMate Washer and Storage KitIncludes: Polypropylene Washing Tank,Plate Holders w/Handles and Dust Cover–2 setsLong Plate adapters–2 pcsLong Plate adapters–2 pcsPlate Holder w/Handle and Dust CoverFor large format plate holder (SE914) see page 6.SE105

SG Series Gradient MakersIdeal for generating gradients of polyacrylamide,sucrose, and cesium chlorideSG15• Milled of heavy acrylic plastic with high quality, leak-free Teflon ® valves• Flat base provides stability on magnetic stir. Comes with a support rod forattaching to a ring stand.• Takes Luer or 4 mm ID tubing. With included adapters, can also take 2 mm IDor 22 gauge tubing.SG30Ordering InformationCat. #DescriptionSG15Gradient maker, 15 ml total volumeSG30Gradient maker, 30 ml total volumeSG50Gradient maker, 50 ml total volumeSG100Gradient maker, 100 ml total volumeSG50Includes:• Gradient Maker w/Teflon Valves• Luer Outlet Fitting• Support Rod• Adapter Barbed Fitting• 22 gauge NeedleThe 500 ml SG500 Gradient Maker is made of two cylindrical acrylic chambersjoined and mounted on a flat acrylic base.• An easy-to-use push-pull valve opens and closes the passage between thereservoir and mixing chambers• Suitable for forming polyacrylamide gradients or buffer gradients used withmedium to small chromatography columns• Ideal for use with the SE615 Multiple Gel Caster (page 19)Ordering InformationCat. #SG500Includes:• Gradient Maker w/Push-Pull Valve• Hose Clamps–4 pcsDescriptionGradient Maker, 500 ml total volumeSG500SG100PROTEIN ELECTROPHORESISGradient MakerSelection GuideNOTE: To calculate the volume required foreach gel to be cast multiply the gel width(cm) x height (cm) x gel thickness (cm). Multiplythis number by the number of gels to be castand that will determine the volume gradientmaker required.Gel Caster (pages 6, 19 and 20)Gradient MakerSE275, 4 gel caster, 10 x 8 cm plate size SG15 or SG 30SE235, 4 gel caster, 10 x 10.5 cm plate size SG30 or SG50SE215, 10 gel caster, 10 x 8 cm plate size SG50 or SG100SE6015, single gel, 18 x 16 cm plate size SG15 or SG30SE675, 4 gel caster, 18 x 16 cm plate size SG100 or SG500SE615, 10 gel caster, 18 x 16 cm plate size SG500SE915, 6 gel caster, 18 x 16 cm plate size SG500