Small belt conveyor from AMI - AMI Förder

Small belt conveyor from AMIKGFT with drum motorRoom-saving, universal and low-costThe AMI small belt conveyorwith drum motor is preferably used wherever theavailable lateral installation dimensions are small.Due to its particularly flat mounting height and driveand diverter drums variable in diameter, the smallbelt conveyor is recommended in particular for smalltransport items, such as containers, piece goods,workpiece carriers and cardboard boxes. The use ofcleated belts, with or without sidewalls, also allowssteeper transport paths of more than 60° to beimplemented without problems. The small beltconveyor is designed for piece good weights of up to30 kg/lm. The conveying speeds are infinitely variablein the range from 0.01 to 2.0 m/sec. in different gearshifts or also via frequency converters.The anodized aluminum profile not only offers opticallya high product integration into your logistic processes,but also allows, due to the flexible and continuousgrooves, different system accessories or externalperipherals to be fitted quickly and easily anywhere.The conveyor belt is sliding on the carrying side. It isavailable in a wide range of designs, for examplesmooth, with grip, foodstuff-safe, with transport cleats,sidewalls, and is adapted individually to your transportitems. The main conveying direction should be pullingin terms of the motor arrangement, but, depending ondesign, can also be delivered pushing or reversible.

eversibleA comprehensive range of sophisticated accessoriesround off the modular system: a wide range of fixedor adjustable lateral guides, ceiling suspensions orsafety harnesses for mounting to the ceiling, adjustablesupports, moving base frames, end and slideoversheets, signal transmitter holder, pneumaticstoppers and pushers, etc.Example: KGFT mounted on servo axisExample: KGFA with transparent lateral guide and silent fan driveTechnical dataOrder detailsKGFT 62 113 52 250 1500TypeProfile heightDrum motorDiverter drumNominal widthTransport lengthAvailable transport length:Transport length individually adjustable in 1 mmsteps from min. 400 mm to max. 10,000 mm.(Transport lengths will be adjusted order-relatedto your requirements).Possible nominal widths:Nominal width min. 200 mm to max. 1,200 mmStandard widths are available in 50 mm stepsat short notice.(individual dimensions possible)Drive drum/Diverter drum:Drum motor diameters: 50, 80 and 113 mmDiverter drum diameters: 52 mm, 42 mmand 32 mm, bomb-shapedProfile height:65 mm, anodized aluminum profileAvailable drive versions:KGFA – Short belt conveyor with shaft-mountedgearboxKGFT – Short belt conveyor with drum motorKGFK – Small belt conveyor with chain gear reducerInterested? Please feel free to contact us!AMI Förder- und Lagertechnik GmbHPhone: +49 (0) 2662/95 65-0www.ami-foerdertechnik.deinfo@ami-foerdertechnik.de