A.O.Smith Motor Catalog - Universal Electric Motors

Heat Sink Kit (W727) for W706 and W713 only• Base mounting• Expands W706 and W710 to 1 HP (115 VAC) or the W710 to 2 HP (230 VAC)• Kit includes four .50” long, #6-32 screws• Approx: 6.80” x 4.47” x 0.88”MSC 700 DC Motor Adjustable Speed Controls • OptionsHeat Sink Kit (W729) for W706, W713 & W770 only• Base mounting• Expands W706 and W710 to 1 HP maximum (115VAC) or the W710 to 2 HP (230VAC)• Expands W770 to 1 HP maximum (115VAC) or 2 HP (230VAC)• Four keyhole slots facilitate mounting• Additional holes for mounting fuse clips and terminal strips• Kit includes six .50” long, #10-32 screws• Approx: 7.00” x 6.25” x 1.38”W727Forward/Brake/Reverse* Switch Kit (W730) for W706, W713 & W770• Completely pre-wired switch and 10 Ohm, 50W braking resistor• Additional contacts for inhibit and dynamic braking• Four-pole hesitation switch prevents operation of actuator through brake position until pressure is momentarily relieved• Kit includes wire nuts and switch mounting hardware*Complete stop required before changing rotation directionW730Speed Potentiometer Kit (W731)• 5K Ohm speed potentiometer• Kit includes mounting hardware and front panel insulator(NOT PICTURED)MSC 700 Series OptionsStockList PriceNumber Description (U.S. $) NotesW727 Heat Sink Kit for W706 & W713 only 76.00 1W729 Heat Sink Kit for W706, W713 & W770 78.00W730 Forward/Brk./Rev. Switch Kit 153.00W731 Speed Potentiometer Kit 12.00Notes:1. Item to be discontinued when present stock is depletedW729www.aosmithmotors.com255