CMS/User Guide - Filterteknik
CMS/User Guide - Filterteknik
CMS/User Guide - Filterteknik
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4 Status LEDAll <strong>CMS</strong> versions have a multicolour indicator 3 on the front panel,which is used to indicate the status or alarm state. The alarm thresholdscan be set from <strong>CMS</strong>-View via the serial interface.<strong>CMS</strong>-K<strong>CMS</strong>Figure 4.1Front Panel VersionsGreen indicates that the test result passed, i.e. none of the alarmthresholds were exceeded.Yellow indicates that the lower cleanliness limit was exceeded, butnot the upper one.Red indicates that the upper cleanliness limit was exceeded.Blue indicates that the upper water content limit was exceeded.Red/Blue Alternating indicates both cleanliness and water contentupper limits exceeded.3 If all these codes seem confusing, please note that a given colour will only everbe seen if the corresponding limit has been specifically set by the user. So forexample if a maximum temperature limit has not been set, the violet indicationwill never be seen. If all that is wanted is a "green or red’’ light, that can bearranged by simply setting only the cleanliness threshold maximum limit.14 Status LED