Rack-A-Tiers Product Catalog

Introducing Over 25 New ProductsTurning Your IdeasInto SolutionsTools For Electricians By Electricians2011/2012

2Table of ContentsWIRE MANAGEMENT TOOLSCable Caddy, Carts, Dolly, Truck, & Data Carts .......................................... 16EZ Roll – Wheeled Wire Dispenser ............................................................... 16Jack-A-Tiers #75 & Spindles ......................................................................... 18MacRack 1, Caddy Macs, & Spool Mac ........................................................ 19Rack' N Roller – Reel Dispenser ................................................................. 16Rack-A-Tiers – Wire Dispenser ..................................................................... 3Ratchet Reel Mac .......................................................................................... 18Reel Mac 60, 70, 80 & Spindles .................................................................... 18Reel-End – Spool Repair ............................................................................... 15Spindle Extension Sets ................................................................................. 16Thomas Wheeler – Coil Spinner ................................................................. 17Tug Wise – Reel Dispenser ........................................................................... 15Wire Tub – Coil Spinner for MC Cable, Flex & NMSC ............................... 17WIRE PULLING & ACCESSORIESAmerican Pull Buddy ..................................................................................... 30Bag Pipers – Line Carriers ............................................................................ 30Barracuda Fishtapes ..................................................................................... 26Bend-All – Cable Bender ............................................................................... 13Croc's – Needle Nose Wire Stripper & V-Cutter ......................................... 13LB Wire Guide ............................................................................................... 31PulLee – Wire Guide ..................................................................................... 31Ropematic – Rope and Fish Tape Pulller ...................................................... 31Snatch Strap – Wire Puller ............................................................................ 30WIRE FISHING TOOLSConeheads .................................................................................................... 38Fibersnakes ................................................................................................... 33Flex Puller ..................................................................................................... 38Flexible Bits and Bumper Balls....................................................................... 34Laserline ........................................................................................................ 38Magnetic Mouse ............................................................................................ 12Plastic Coated Fiberfish, Glowfish & Attachments ........................................ 32-33Wire Python – Wire Fishing Tool ................................................................... 12LASER TOOLS AND LEVELSLaser Chalk Bob IV ....................................................................................... 25Laser Plumb Bob ........................................................................................... 25Levels ............................................................................................................ 24METERSInfrared, Clamp, Multi, Thermometer & Camera ........................................... 24PIPE AND CONDUIT BENDINGHoppy Bender – Conduit Pipe Bender ........................................................ 9Pipe Viper – Cold PVC Pipe Bender ........................................................... 8Wacky Ruler Mat – Conduit Measuring Guide .............................................. 8TOOL BELTS, ACCESSORIES, TOOL BOX AND OTHER STUFFBigg Lugg ...................................................................................................... 26Booty Pack – Disposable Boot Covers, Gloves, Respirators ........................ 28Butt Pouches, Mini, Grande & Driller ............................................................. 11LED Head-Lite Hat ........................................................................................ 28Lift-n-Lok Tool Box ......................................................................................... 11Racksy Knee Pads ........................................................................................ 28Tool Pouches, Belts, and Suspenders ........................................................... 10Tool Tray Carriers .......................................................................................... 11Wrist Magnet ................................................................................................. 33COLORED RACKY BITS/SCREW DRIVERS AND ACCESSORIES#0 Yellow Square ........................................................................................... 5#1 Green Square ........................................................................................... 5#1 Light Blue Phillips ..................................................................................... 5#2 Blue Phillips .............................................................................................. 5#2 Red Square .............................................................................................. 5#3 Black Square ............................................................................................ 5#4 Orange Square ......................................................................................... 54" & 6" Double Ended Bits – #2 Phillips & 1/4 slot ........................................ 54" & 6" Double Ended Bits – #1 & #2 Square Drive .................................... 5Lockhard #1 Square with Wings 4" & 6" ........................................................ 4Magnetic Hex Bits, 1/4" , 5/16", 3/8", 7/16" & 1/2" ......................................... 5Magnetic Bit Holder ....................................................................................... 4Magnetic Sleeve ............................................................................................ 4Magnetizer/Demagnetizer ............................................................................. 4Picquic Screwdrivers ..................................................................................... 4Quick Screw – Conduit set screw screwdriver .............................................. 6Robertson® Screwdrivers ............................................................................. 6Starter Kits – Includes bits and Display Case ............................................... 5ELECTRICAL REFERENCE BOOKSDewalt & Ugly's Professional Reference Series ............................................ 14CONNECTORS, ETCKOK Series – 1/2" to 2" Plastic Knock Out Fillers ......................................... 36Level Jack – Low Voltage Data/com Mud Ring ............................................. 37Nut Blaster – Wire Connector Tools .............................................................. 29Rapid Fire Connectors – 1/2" & 3/4" ............................................................ 37Stand Off Bracket .......................................................................................... 37Stud Buddies – Steel Stud Bushings ............................................................. 36Super Box 4" – Fire Alarm Box ...................................................................... 37Tom Two Way 1/2" Connectors ..................................................................... 37HOLE CUTTINGHole Cutters, Extensions & Accessories ....................................................... 20-22Multi-Function Hole Cutters ........................................................................... 22Step Drill Bits ................................................................................................. 22OTHER INNOVATIVE PRODUCTSHooker – Pipe Wrench Adapter ..................................................................... 3AC Sensors, Circuit Siren & Plug Master Circuit Tester ................................ 27Bolt Template ................................................................................................. 26Breaker Lok ................................................................................................... 28Claw Level ..................................................................................................... 39Drillers Dust Bowl .......................................................................................... 23Exploding Garbage Can ................................................................................ 23Panel Buddy – Knockout Kit .......................................................................... 26Plate Vise, Wire Pull Pro & Lumberlok .......................................................... 7Pocket Kart – Reel Carrying Tool .................................................................. 16ProGrabit Kit – Damaged Screw Remover .................................................... 14Qwik Lok – Locking Plug ........................................................................... 6Racky Strap – Utility Strap ............................................................................ 36Sluggo-Ox ..................................................................................................... 26Staple Shark .................................................................................................. 39Tie Lips – Cable Tie Holder ........................................................................... 29V-Cutter ......................................................................................................... 39Wire Terminator ............................................................................................. 29AUGER BITSNail Chipper, Ship Auger, Tri-Cut, Standard & Overdrive .............................. 35

The ONE TOOL that does it all !Compact...Interlocking PairsWire Dispenser...Part #11455very versatile...pull wire...Versatile • Waterproof • Rustproof • Reliable • Rugged • FastONE SIZE Rack-A-Tiers FITS ALLUp to: 34” / .9m • 330 lb. / 150 kg wire reelshooking...portable...workbench...pipe vise...easy to set up...caddy...saw horse...seat...THE HOOKER PIPE WRENCH ADAPTORPart #10455Every RACK-A-TIER needs a Hooker!!!“Turn your Rack-A-Tiers into a Pipe Vise”LightFastSimpleInexpensiveNOTE: REQUIRES PIPE WRENCH 18” RIDGID ® or equivalent fit. (not supplied)3

The peg that fits the hole#1 square with wingsThe lockHard locks in placeand never strips.Part #72134P 4”#72136P 6”Magnetic Bit HoldersMagnetizer/DemagnetizerQuick ChangeMagnetic HolderPart #72000Magnetizes or demagnetizesdriver bits, tools and smallsteel parts instantly!Part #70988This unique tool enhancement fitsall of our quality bits, with an easyslip-on installation.Magnetic SleeveneverIdeal every time you need one-handedoperation. Do it with confidence andlose your grip.Part #72022• Slim, comfortable and solid• Corrosion proof magnetic alloy shank• Legendary instant-bit-changeStubby• Solid, comfortable, high torque handle• 6 High quality 1.3” length insert bits• Ideal for work in close quartersDash 7• 7 – 2” length, 1/4”Hex Powerbits• Comes in 4 brightnew colorsPart #P05001SIXPAC Plus• 7 – 3” length, 1/4” Hex Powerbits• 11.5” total lengthPart # P88001Part # P910004

COLOR CODED DRIVE BITSMakes bit selection FASTER, EASIER and more EFFICIENT!!Magnetic Hex BitsRED 1/4” Hex DriveYELLOW 5/16” Hex DriveBLUE 3/8” Hex DriveBROWN 7/16” Hex DriveBLACK 1/2” Hex DriveAvailable in 2 1/2” & 6” Hex BitsPhillips BitsBLUE #2 PhillipsLIGHT BLUE #1 PhillipsGenuineROBERTSON ® BitsYELLOWGREENREDBLACKORANGE#0 Square Drive#1 Square Drive#2 Square Drive#3 Square Drive#4 Square Drive4” & 6” Double Ended BitsSize and color availability as shown.3”, 4” & 6” drive bits#2 Phillips1/4” slot#1 square drive#2 square driveCOLOR coding? It’s so simple but it works. Racky Bits areeasier to use and harder to lose and they make your job easier.If that’s not enough, our genuine Robertson® RACKY BITS havehardened tips that fit better and last longer.Ordering Options:1. Convenient blister cards2. Bulk qty(s) for display case5

GenuineROBERTSON ® Square driveSCREW DRIVERS#1 green robbyThe QUICK SCREWconduit set screwscrewdriver bit.The FASTEST wayto tighten conduitset screws.#2 red robby#3 black robbyPart #SD110G#SD210R#SD310BKGreat Quality – Great FitRobertson ® , AKA Square Drive, has proven itself in Canada for 90 years. Itis now popping up in the USA. The advantages of Square Drive are welldocumented and genuine. Why not use genuine Robertston ® screw driversfor the best grip, best fit & most torque.Part #72032“Put this in your drill &give your wrist a rest.”Tired ofThis?▶The CLICK you can TrustGuarantees extension cords and tools are LOCKED together. Itis the TOUGHEST, STRONGEST, MOST RELIABLE, 120V - 15ACONNECTOR.Doggone luckyI was using my‘Qwik Lok’!Try This.• Qwik-Lok is the ‘Must-Have’ locking retro-fit /replacementconnector for extension cords• An outstanding end that eliminates tied, frayed, burned outor ruined cords and connectors• Works with common 2 or 3 pronged plugs• Eliminates need for ‘twist-lock’ devices• Delivers consistent, reliable power at all times fordemanding industries & trades6Part #97008

I sure could’veused THAT last week!Made of Solid SteelPart #13355Plate Vise• Weight: 3.9 lbs.• Holds several lumber sizesincluding but not limited to1” x 2”, 2” x 4”, 2” x 6”, & 4” x 4”• Includes 12” RulerCommon FeaturesWire Pull Pro Stands• Weight: 14.5 lbs. each• As a set can hold 1” to 6” conduit, up to 36”wire spools and up to 1,000 lbs.• Sold separatelyTightly Holds:• Plastic & Metal Pipe• Conduit, Unistrut, Rebar• Lumber & Dowels• And Much More...Lifts Materialfor Easy:• Cutting• Drilling• Measuring• And TighteningPart #13555Lumber Lok• Weight 4.3 lbs• Holds 1” x 4”, 1” x 6”, 2” x 2”,2” x 4”, 2” x 6”, 2” x 8”, 2” x 10”,2” x 12”, 4” x 4”, 4” x 6”, & 4” x 8”• Includes 12” RulerPart #13455Makes Your Job: Faster, More Accurate and MUCH SAFER7

ThePipeªYOU CANCOLD BENDRIGID PVC PIPE WITHOUTPIPE COLLAPSE OR FRACTUREOne Size Fits ALL Knees & Heads!ColdPVCPipeBender• NO HEAT GUNS• NO HEAT BLANKETS• FEWER PVC FITTINGSFASTER AND EASIERTHAN CUTTING AND GLUINGFACTORY FITTINGSHOW?INSERT THE SPRING INTO THE PIPE ANDBEND ACROSS YOUR KNEE!!Don’t dropyour tapemeasure...drop yourconduit,mark andbend.Definition of ColdNOTE: Pipe should be 50° F or warmer.PVC pipe requires slight over bending which will“pop back” a few degrees upon the release ofbending pressure.Includes electricaltables and symbols81/2” Part #580503/4” Part #580751” Part #581001 1/4” Part #581251 1/2” Part #581502” Part #582002 1/2” Part #582503” Part #583003 1/2” Part #583504” Part #58400Part #3100060” Long x 8.5” Wide

Don’t get bentout of shape!Get the AmazingHoppy BenderEven the most complicated bends madeHoppy Bender’s Unique Features• A “Stop” attached to the Bender head used tocreate exact and repeatable bends every time.• Simplified “Multipliers” engraved into the benderfor placing the “Stop” prior to making offsets andfour-point saddles.• Special 22.5 and 45 degree marks engravedinto the bender for placement of conduit bendmarks as well as standard degree marks forstop placement, used together for bendingthree-point saddles without reversing the conduitin the shoe.• Handy reference charts attached to the handlefor locating bend marks.1/2” Bender–Part #570503/4” Bender–Part #57075STEP 1Read table &MARK conduitOffsets, 3 & 4 point saddles, 90º bendsalways perfect and done in aSTEP 2SET stopMARK, SET, BENDFraction Of The Time!FrontSTEP 3BENDconduit2BackExample of 4” Offset or 4 Point Saddle1. MARK conduit at 8” intervals2. SET stop on 2 multiplier3. BEND conduit to stop9

THE MOST INNOVATIVE TOOL BELTS ANDBAGS ON THE MARKETPart #43241 –S#43242 –M#43243 –L#43244 –XLComboIncludes: Molded Support Belt,Electrician’s tool pouch, large9 pocket tool pouch, hammerholster and tape holder1250 denier DuraTekfabric with high densitynylon webbing aroundpocket openings.Reinforced with bar-tackstitching and heavy dutymetal rivets.Molded Air-ChannelSupport BeltMolded Air-ChannelSupport SuspendersFeatures:• Air-Channel ventilation & contouredback support for maximum comfort• Strengthened by a nylonweb-core interiorPart #43401 –S#43402 –M#43403 –L#43404 –XLFeatures:• Adjustable thick Molded Air-ChannelFoam shoulder pads• Heavy duty spring hooks that attachto the rings on the MoldedAir-Channel belt• Leather crossover divider• 2” wide adjustable nylon strapsPart #43606Electrician’sTool PouchFeatures:• Divided main compartment• 1 upper pocket• 8 interior pockets• 7 exterior slots & pockets• 1 electrician’s tape chainLarge 9 PocketTool Pouch Features:• Divided main compartment• 1 upper pocket• 2 large interior pockets• 2 large hanging pocketsPart #43201 Part #4320210

• Quick to put on AND COMFORTABLE!• These tool pouches fit in your pocket• Large snap loop for attaching to your belt if preferred• Made of ballistic nylon• Lightweight & durablePocket Tool HolderNO BELTREQUIREDDrillerGrandeMiniMini Part #43015Grande Part #43095Driller Part #43110Small 25 PocketTray Tool CarrierFeatures:• 14 exterior pockets (5 withvelcro closures)• 14 interior compartments & pockets• 1 7” x 5 1/2” twelve-compartmentplastic tray• 1 large exterior zip-top pocket• 1 measuring tape clip• Includes shoulder strapPart #43707Features:• 29 exterior pockets (3 withvelcro closures. 1 large clearpocket with velcro closure)• 16 interior compartments& pockets• 2 7” x 5 1/2” twelvecompartmentplastic trays• Includes shoulder strapPart #43706Large 44 PocketTray Tool CarrierTMTMA New Revolutionary Tool BoxLift-n-Lok Tool Box• No mixing between drawer compartments• Extremely strong• Easy to operate• Made in USAKeeps your nuts in place when the world around you is upside down...Your steel nuts that is!Part #66536 – Yellow/Black11

Wire Fishing Made EasyEVEN works through insulation!!1.CaptureFlexible leader withmagnet headHand paddle withpowerful magnet10’ Ball Chain included2.DriveCAUTION!!Extra strong MagnetBe careful workingwith Apprentices!Also makes a great stud finder.3.ExtractAny Fiberfish can easily be threaded onto the magnet head. This will help pushthrough dense insulation and guide through fire-block drill holes.Part #MAG6589YOU CAN’T TRAPTHIS MOUSE!!!Features• Easily snake wire behind sheet rocked walls• The original magnetic snaking device• Do the job fast and clean every time• Felt cloth pad keeps walls undamaged• Small metal tabs require only a 1/2” hole12Not ready for the Python? Pick up a Magnetic Mouse. This little guy packs some big power and is easy to manoeuvre.Also minimizes the impact on your wallet.Part #68991

“Needle NoseWire Strippers”CHECK OUT THE FEATURES:• Needle nose tips• NMSC stripper at the “nose” where it iseasier to use inside boxes• Strips conductor sizes from #10 down to#22 AWG (for telephone wire)• Large cutting blades for easy generalpurpose cuts• Barrel sleeve crimper near the pivot• Ergonomic “hourglass” shaped handlesfor comfort & speed• Glow-in-the-dark handlesComing this year theV-Cutter see page39Croc’s! What a beautiful stripper. Check out those curvaceous grips. Try out those needle nose tips. Dual action sheath stripper, crimper,oversized cutters, 22 gauge stripper as well. Croc’s rock. Try ‘em.Part # 47000Cable BenderKnuckle BusterFinally...The Amazing Knuckle Saver from Rack-A-Tiers ®• Captures wire• Bend inside enclosures to the right or left• Bend to the front or back• Your feeders will lie in the lugsMachined from 6061 aircraft aluminumFits a standard 1/2” ratchet.Fits #3 to 350 MCM conductorsPiece of CakePart #77455Ever give a meter base a knuckle sandwich? Too bad it was your own. Next time, defend yourself with the Bend All. Perfectly sized for 4/0, it takes the pain out of 200amp services or sub feeders and conductors like it too. The Bend All makes micro adjustable bends without brutalizing the wire.13

Industrial SeriesDamaged Screw Remover• Works on jagged, uneven and rough breaks• Self centering tip, no walking• Compatible with quick connect chuck systems• Easy to use with 3/8” variable speed reversible drill• Extracts screws up to 4 inchesScrewsBoltsGrabit #1 No. 4 - No. 6 No. 10 (5mm)Grabit #2 No. 8 - No. 10 1/4” (6mm)Rounded out screw heads, what a nightmare! Not anymore. Just drill out the damaged screw / bolt with one end of the Grabit,then flip it over and the “grab end” winds out the screw. MADE IN USAKit Part #72120The Original ElectricalReference BooksEveryone Needsan Ugly’sRevised 2011 EditionOn the Job Reference• Mathematical formulas• National electrical code• Wiring configurations• Conduit bending• Voltage drops• Life saving first aid procedures• Much, much moreAll in an easy-to-read andeasy-to-access formatPart #’sElectrical References 73215Electrical Safety & NFPA 70E ® 73214Referencias Eléctricas 73217Electric Motors & Controls 73216Electrical Desk Reference 7321314ElectricalTrade SeriesOn the job pocketreference books offer easyto read charts & detailedillustrations. The 4” x 6”size fits easily in a toolboxor pocket. Each bookfeatures over 350 pagesof complete referencematerial.Professional Reference BooksPart #’s73200–Electrical73205–Wiring Diagrams73203–Lighting & Maintenance73208–Electrical Estimating73201–Datacom73204–Electric Motor73210–Security, Sound & VideoDEWALT REFERENCE BOOKSElectrical LicensingPart #73206Based on the 2011 International Code ®Subjects include methods to improvetest scores, strategies to prepare, studyaids and tips, examination regulations,formulas and references, realisticsample exams, and answer keys withcorresponding NEC ® references.Electrical Code Reference Part #73207Based on the 2011 International Code ®Illustrates hundreds of the most common coderequirements, violations and installation concernsincluding: materials, notching and cutting,commercial hoods, combustion air openings,access and clearances, duct construction,mechanical ventilation.

PocketKartSave Your Fingertips!Features• Light weight• Swivelling handle• Folds up easy• Fits in pouches• Fits in pockets• Holds up to 200 lbsPart #56000Use the Pocket Kart to carrywire reels of all sizes.Features:• Salvages “unusable” wire• Reusable over and over• Money makerApplication - 6 1/2” diameterplastic spools“Wire Spool Repair”FixedBrokenHow many broken spools in your shop? A few? Abunch? There’s gold in them thar rolls but how do you get at it? Fix themwith the Reel-End.Pays for itself with the first roll saved and it’s reusable again and again.The Reel-End fits plastic spools #10 through #18 gauge.A real money maker.Part #17455Standard ModelFeatures:• Size: 15” x 15”• Handles up to 500 lbs reels• Works with wooden and plastic reelsDeluxe ModelFeatures:• Size: 21.5” x 21.5”• Handles up to 1500 lbs reels• Made of 3/8” thick aluminum alloy• Built to handle anything4 Screw Holes forEasy AttachmentStandard #11931Deluxe #11932Ever had a jack-stand kick out on you? An accident like that can cost you a lot of time, and towing a clunky reel trailer behind your vehicle is nofaster! Why risk it? Simply attach the Tug-Wise to the base of your reel and be ready to pull cable instantly.15

Roll into the FutureE-Z ROLL WIRE RACK is the ultracompact / collapsible wheeled wiredispenser.When you’re ready to pull wire,wheel the E-Z ROLL into positionand dis pense wire directly fromyour pipe bender or 1” EMT.Wire spools run on spring-loadedrollers, no axle.Advantages:• Spools can be loaded one at atime without disturbing the others• Transport, dispense and storewire with no set up or breakdown• No axles or loose parts• Rugged USA constructionLength - 32”Capacity - 4 to 5 rolls of THHN 10, 12, 14 gaugeApplication - 6 1/2” diameter plastic spoolsStands up foreasy storagePart #12888Features:• Rigid Steel Construction• Light-weight Design• Durable ‘Caution Yellow’ Finish• Compact (fits in any job box)• 150 lb. Load Tested• Holds Reels up to 18”Collapsible for easystorage & handlingPart #55455Cable Truck & Cable Caddy• Constructed of rugged 1” steel tubing.• Both are 43” tall with 7” rubber wheels• Both can accommodate spools upto 16” wide on solid steel 1/2” axles.• Cable Caddy features 6 axlepositions for unlimited versatility.• Cable Truck has 4 axle positionsand a solid steel plate fortransporting material.Part #CC1200 Cable CaddyPart #CT1100Cable TruckCable Dolly• Cable Dolly features 8 - 12” widespindles to accommodate awide assortment of reel sizes.Durable locking casters are ratedup to 1200 lb.• Cable Dolly Jr. features 4 - 12” widespindles. Part #CD3100 (Not Shown)Extensions also available.Part #CD3000Made to orderPart #CD3000-EXT8 piece spindle extension set withtube connectors. (17” extensions)Cable Carts• Comes with interchangeable1” and 3/4” axles.• Holds up to 30 spools of THHN• Vertical racks swing forward foreasy loading.• Space for plywood work tableon top.Part #CC2000Cable CartMade to orderDimensions: 43”H x 41 1/2”L x 28”WShipping weight: 150 lbs.Part #CC2000DCable Cart - DataMade to order16

Wire Rewinder and DispenserFeatures:• 360° feed adjusts automatically• 3-way adjustable center hub• Removable top plate has a handle for rewinding wire• Large 24” diameter capacityTop plate onfor rewindingMC CableSalvagedwire ready forreinstallationFlexNMSCPart #18455No Wire Spool?No Problem!Hangs froma ladderThe Usual WayThis easy-to-hang wire dispenser allows fast,twist-free NMSC, MC cable or Flex pulling.• Affordable• Dependable• Saves Time• Eliminates Waste• No Maintenance• CollapsibleA New WayMost coil dispensers are too big, cumbersome and expensive. Not this one. The Thomas Wheeler knocks down and sets up in seconds, hangs on a 2x4, in the trusses,above tee bar or on a ladder. Light, simple, rugged and it really works. A great value.Part #1945517

Reel Mac 70— screw-typetelescoping reel jack for 46 to96” diameter reels.Reel Mac 60— screw typetelescoping reel jack for 26-56”diameter reels.Standard Features• Self-lubricating Roller Bearings – no grease required• Quick-action lock washer for fast positioning• Fall Guard feature to reduce pinching• One-bolt disassembly – no welding required for serviceReel Mac 80— heavy dutyratchet drive reel jack for reels upto 90” in diameter. Convenient,detachable ratchet handle storesin base when not in use.REEL MAC SPINDLES Used with Reel Mac reel jacks. (Sold separately)DescriptionREEL MAC & JACK-A-TIERPart No.ReelDiameterCapacityWeightReel Mac #60 11860 26-56” 2500lb. 27lb.Reel Mac #70 11870 46-96” 2500lb. 46lb.Reel Mac #80 11880 up to 90” 3750lb. 99lb.Jack-A-Tiers #75 11875 46-92” 2500lb. 34lb.Corresponding SPINDLESDescription Part No. Dimensions Capacity Weight#61 11861 2 3/8” x 62” 5000lb. 39lb.#71 11871 2 3/8” x 76” 5000lb. 47lb.#81 11881 3 1/2” x 100” 7500lb. 119lb.#71 11871 2 3/8” x 76” 5000lb. 47lb.Use this chart to select the right Reel Mac, Jack-A-Tiers or spindle for your needsMid-Range Ratchet Reel StandStandard Features• Self-lubricating bearings• Built-in handle storage• Patent-pending safety head• Use with Reel Mac Spindles• Ratchet design allows for easy lifting• 2,500 lbs. capacity each• 17.5” to 28” lifting range• up to 55” diameter reels• Designed for use with #350 & #500 wire reels18Weight: 28 lb/12.7 KgKeeps spindles securely in placePart #11885

MAC LINECaddy Mac Features• Accommodate wide range of spool sizes.• Wire guides for smooth feeding from the spool.• Patented spindle locking system - spindles stay put during transportation.• 1/4” solid spindles are attached to Caddy Mac cart… no loose pieces.• Spindles swing out to set position for convenient loading of wire spools.• Spindles can be easily removed for the occasional use of larger spools.• Spindles store in special loops... will not fall out even during transportation.• Large 10” wheelsMAC• 1,000 lb load capacity• Eight bins of storage• Arms fold easily withplunger releasePart #11917CADDY MACPart # 11901Number of Spools Max Spool Dia. Load Capacity Weight Width Additional Features8-#10 awg. or12-#12 awg.7.5 in19 cm200 lb.90 kg.50 lb.23 kg.26 in66 cmTransports spools on spindlesand works as a dolly. Wire isdispensed while laying flat.CADDY MACPart #11902Number of Spools Max Spool Dia Load Capacity Weight Width Additional Features16-#10 awg. or 7.5 in400 lb. 64 lb. 26 in Folds up for compact storage24-#12 awg. 19 cm 180 Kg. 29 kg. 66 cmCADDY MACPart #11904Capacity Weight Width Additional Features6-500’ spools - 8” diameter 67 lb. 27 in A large capacity cart, dispenses wire while laying flat.6-2,500’ spools - 16” diameter 30.5 kg. 69 cmMACA Reel TransporterPart #11900Max Reel Width Max Spool Dia. Reel Capacity Weight Width Additional Features25 in63.5 cm40 in101 cm350 lb.160 kg.80 lb.36.4 kg.31.5 in80 cmAll steel frame, easy set-up for cabledispensing. Compact storage.Made in USA19

See price sheBrick, Fiberglass, Plywood, Plastic, Roofing, TilConcrete Block, Aluminum, Steel, StSheetrock, Hard Woods, SoNonferrous Metals, SPart #91000 SeriesSelf-Feed Multi Purpose Hole Saws• Hole Saws for cutting wood, laminates, plaster, OSB, MDF,fiberglass, chipboard, sheetrock, perforated brick, roofing tilestucco and more.• Aggressive cutting action with TCT teeth and deep side gulletsfor fast plug removal.• Max cutting depth is 2-1/4” sized from 5/8” to 6 1/4” carbidetipped.• Works with all standard hole saw arbors, arbors - bits available.Dry Cutting Diamond Core Bits• For holes over 1” to 6” in diameter, 10” cutting depth.• Perfect for brick, block, flagstone, concrete pavers,slate, tarmac, roof tile, and other hard materials.• The dry core bits works without water.• Not for use on cured concrete or rebar.Part #91000 SeriesThe diamondcore bits workswithout water.20

et for detailse, MDF Fibre Cement Board, Laminates, OSB,ainless Steel, Hardie Board, Stucco,ft Woods, Flagstone, Slate,heet Metal & More...Part #92000 SeriesPart #93000 SeriesCarbide TippedSteel CuttersWe have High End andLow End Cutters• Ejector spring• Tapered center drill• 5/8” up to 5 1/2”Multi Bit (Step Drills)TheJAVELINAll In One ExtensionThese willturn intotheseHardened stepped Bits for clean cuts in sheetmetal, electrical boxes, arborite, etc. Handy forcreating knockouts.Available in1/8" to 1 1/2” sizes.MLT1 1/8" - 1/2" 13 stepMLT3 1/4" - 3/4" 9 stepMLT4 3/16" - 7/8" 12 stepMLT5 7/16" - 1 1/8" 12 stepMLT 7 1/4" - 1 1/2" 11 stepFULLY ADJUSTABLEHOLE CUTTER & AUGEREXTENSION KITNever get caught in a drilling extensionjam again!Just cut a 3/8”-16 threaded rod anylength you need. The only extensionsdesigned to drill over two feet.Can also hold driver bits, nut drivers,drill bits, etc.Pat # 7,802,948 Part #95000Don’t get RIPPED OFF!Not all hole cutters are equal, let us findthe right one for you.21

Multi-FunctionHole CutterThe dust has finally cleared...we’ve worked out thegrowing pains with the new improved nylon bushing.Cuts through:• Plywood• Sheetrock• Fiberglass• Fiber cement board• Up to 20 GA. sheet metal• AluminumCompare FeaturesOther Hole Saw KitsReplacementBladesAdjusts to exacthole size neededNOVan full of dull hole sawsYES1 7/8” - 9”1 7/8” - 12”1 7/8” - 17Dust collectorshieldNOLady finds new contractorYESClean jobDesigned toreduce kickbackEconomicalreplaceable bladesNOJaw breakerNOSharpen a bunch of littleteethYESNon-Jaw breakerYESSharpen onlytwo bladesPart #90-VH HSS#90-VT CarbidePrice $300.00 Less than halfNo-brainer!!!Save your lungs! Cutting holes without protection can be hazardous to your health. Protect you & your crew with the HOLE PRO.Part #90200Part #90300Part #90400Hole Saw AccessoriesArbor extensionPart #90105Hole Saw Dust Shield• Has a ABS shield that collects all the dustand shavings when using a hole saw.• Has a 7 3/4” OD and 6 3/8” IDsupporting a hole saw up to 6 ¼” indiameter and up to 2 1/2” cutting depth.• Saw and vacuum adapter sold separatelyPart #90103Arbor Hole Saw Adapter for allHole Cutter Models• Coverts any hole cutters for usewith any hole saw• Unique dual head design allowsmounting 1/2”-20” or 5/8”-18”threaded hole sawsVacuum Adapter for all Hole ProDust Shields• Reusable plug to re-seal shield hole• Perfect addition to hole-pro shields,power series X & XL models• Attaches to standard 1” power toolvacuum hosePart #9010122

Best WaySave the Balls forthe CourtHOLE SAWDust CollectorFitsHole Sawsup to 8”New Improvedwith NylonBushingOld WayPart #48000You may enjoy a face full of drywall dust, but yourcustomers might not. The flexible DRILLER’S DUSTBOWL compresses against the work surface and trapsall dust and debris as you drill. It fits your drill andhole saw without any adjustments. Put an end to‘unprotected hole sawing’.EAT MY DUST? Not with this tool.Heavy Duty,Tear ResistantPolytuf FabricCollapsible Trash ContainerFeaturing an internal support springthat “Springs into Action”Size:19” x 24” (open)1 1/2” x 24” (collapsed)Who says you’re a slob? Clean up your reputation with your own trash can. The Exploding Garbage Can will dazzle your customers, especially if you use it!Pops up and folds flat…ready when needed. You can also take one home for the garden.Part #5100023

Rack-A-Tiers ® is now a prouddistributor of REED InstrumentsAC/DC Clamp Meter• 3-3/4 digit LCD with high-speed,42-segment bargraph• Touch Zero and Data Hold functions• Polarity and overload indications• Continuity test• Auto or manual ranging• Auto power-off• Clamp MeterPart #9C201Infrared Thermometer12:1 Ratio Part #9ST8819• User selectable °F or °C• Built-in laser pointer identifiestarget area• 12:1 Distance to Spot Size ratioInfrared Thermometer50:1 Ratio Part #9ST8839• User selectable °F or °C• Built-in laser pointer identifies target area• 50:1 Distance to Spot Size ratioPart #9BS150AC/DC Multimeter Part #9ST202• Auto and manual ranging• Data Hold and Relative functions• Temperature function: 760°F (400°C)• Diode check and continuity functions• Auto shut offVideo Inspection Camera• Detect and diagnose problems in hard to reach or confined areas--even in total darkness or underwater• High visibility 3.2” colour TFT LCD monitor with 320 x 240 pixelresolution• 3.2’ flexible gooseneck imager head retains configured shape andis waterproof (IP67)• Gooseneck is expandable up to 30’ with the optional cableextensions• High visibility 10° adjustable LED lighting• Camera and video functions allows you to capture high resolution• JPG images and record live video for documentation purposes• Transfer files to a computer via USB cable and optional 2GB SDmemory card• Power Supply: Rechargeable 3.7V, 2000mA lithium-ion batteryThe Straight ShotComing this year theClaw Level see page 39Part #453033 precision vials0°, 45°, 90°Jet Level4 precision vials0°, 30°, 45°, 90°• CNC milled from 6061 aluminum extra large“VD” groove, straddles up to 10” diameter.• Rare Earth magnets for extra holding.30° 90°24• Water & Shock resistant.Pat # D598,310Part #45404

For All Commercial, Industrialor Residential InstallationsGreat for laying out ceiling lightsRiskyLooking for a better way to lay out complexceiling and high bays?The SELF LEVELING VERTICAL LASERfrom RACK-A-TIERS ® is the answer!Fast, SaferFeatures:• Solid brass construction• Convenient on/off switch• Factory aligned laser modulecalibrated to precise 0.15º accuracy• Magnetic damping for quickstabilization• Self leveling and aligning (vertically)• Durable plastic carry case• Battery includedPart #88455The LASER CHALK BOB IVenables you to do the lay outon the ground.LASER CHALKBOB IVFeatures:• Level method–pendulum system• Battery life–16 hours• Line laser wave length: 630–580nm• Lines blink to indicate out-of-level range360°The Laser Chalk-Bob IV gives you four reliablereference points:• Two “chalk” lines on any horizontal or verticalsurface (accurate to 1/4” @ 20 feet)• Two “bob” points for pinpointing on ceiling or floor(accuracy: ±1/8” @ 16’)Rotational BaseThe LASER CHALK BOB IVcan now be rotated through360° whether on a tripod ordirectly on the ground whileattached to the rotational base.Part #2440225

The UltimateGround RodDriving ToolSLUGGO-OX is the revolutionary new tool that’staking the industry by storm.Features• Incredibly strong, made of 3” hot-rolled,heat-treated, hardened steel• 3 1/2” bore to accept 3/4” and 5/8”ground rods• 80% more striking surface• One piece, light-weight (7lbs.)• Yellow zinc chromate surface to deter rustPanel Buddy Knockout KitTired of trying to remove Knockouts?• Kit removes knockouts on Electrical, Security,Alarm and Datacom Panels• Works with lipped and unlipped panels.OOPSY!“Your turnto hold theground rod,Rod – I thinkit’s time we gota ‘Sluggo-Ox’!”Part #67119Part #7WBK10041 Templates in One! Quick and Easy! Reusable!Set-Up in Minutes! Weather Resistant ABS Plastic.For setting poles 8” - 24”Select a hole saw thatmeasures about 1/8”larger than the bolt tobe used and drill thetemplate at the selectedeasy centering divot mark.Part #67441Barracuda FishtapeA revolution in fishtape design. The first fishtape with an integrated pullingsystem that works! No more pliers, no more tripping over the case whileyou pull, no more kinks in your tape from pulling at awkward angles.Bigg Lugg IThe originalcordless drillholder.Bigg Lugg II26• Integrated Cam-Lock handle grabs onto the tape and pulls.• The harder you pull, the tighter the cams grip.• Let go of the handle and the cams release, allowing you to windup the slack as you go.• Winds and unwinds like a standard fishtape.Patent #6416040BRC100 -100’ Carbon Steel BarracudaBRC200 -200’ Carbon Steel BarracudaThe next generationfor personal toolcarriers designed forcordless drills,air-nailers, paint cans,etc. (limit 10 lbs)Part #43001 Part #43002

Make Your JobSafer, Faster, EasierFeatures• Combines full function dull-outlet circuittester with 220V detection and multipledirection bubble level.• Eliminates the need for multiple tools totest and straighten any wall outlets• Levels • Diagnostics • Terminal CoversPart #99102“To be on the safe side,I better check to makesure the power is turnedoff before proceeding...”AUDIBLE CIRCUIT IDENTIFIERFeatures• 3 to 130 volt AC & DC• Built in polarity lights• Handy adapter fittings• Adjustable volume controlSOUND - It’s Simple & ReliableIncludes FREEadapter SetPart #99101Prevent Electrical Shock!• Non-contact detection of 50-1000 VAC• Troubleshoot electrical circuits• A simple way to locate dangerous defective grounds• Hand held device for determining presence or absence of 50-1000Volts AC in insulated wires, wall receptacles, fuses, junction boxesand voltage carrying electrical systems• Senses voltage without metallic contact• Outstanding safety instruments that locate defective grounds,energized circuits, induced voltage• 2 replaceable “AAA” alkaline batteries includedAC Sensor50-1000 Volts ACBright red glow indicates AC voltage.Part #99000Ultimate AC SensorPart #9900150-1000 Volts ACBright red glow indicates AC voltage AND audio alert.Note: Before using the AC Sensor or Ultimate AC Sensor, alwaystest it on a known live voltage source to insure proper operation.27

Save your knees, you’llneed them later!Racksy PadsWith Gel ImplantsSturdy and so comfortable,you’ll actually wear them.Velcro/elastic straps makethese knee pads easy to puton and take off.So comfortable, you’ll never want to get up! Part #66455BOOTY PACKKeepin’ It CleanLeave a clean impression, not your dirty tracks with theseslip resistant plastic booties, comfy gloves & respirator.Wearingyour booties& gloves?Kit Includes6 pairs of booties • 4 pairs of nitrile gloves• 4 pairs of vinyl gloves • 3-N95 RespiratorBooty Kit #47099Booties only sold separately #47009BHead-LITE Hat“Whichbreaker is forour hats?”28Hands-FreeFlashlight• Powerful bulb illuminatesup to 40 ft• Batteries included• Bright efficient L.E.D.The Head-Lite Hat is great for jogging, hiking, walking the dog,etc. Heck, some people are even using them for work. They’re theones who are tired of holding a flashlight in their teeth or undertheir chin when working in tight places, attics, crawl spaces…All the benefits of a flashlight and a hat in one.Part #16000BL#16000MOThe only breaker lock you need.Fits most manufacturer’s breakers.Also works on standard toggle switches.Part #75000

Tired of looking forburied wires? Use the TERMINATOR!Inform Trades where to pass wirethrough drywall.• Terminate wire tails for vanity lights, sconcesand under cabinet lighting.• Leave message for drywall installer.• Removes unwanted holes and uncertaintyduring finish work.• Labor saver, time saver all-in-one.Part #32000ATTN: DRYWALLER - Bring wire tail through drywall at designated location.Tired of looking for buried wires?Use WIRE TERMINATOR toinform Trades where to passwire through sheet rock.• Fast, Easy Installation• Prevents sore fingers and cramping hands• Fits all brands; yellow, tan, red, grey & blueWant to spend moretime installing& less timepicking up?“If our batteries hold up we’ll have these in by lunch”XLPart #72101With convenientbelt clip.XXLPart #72102Part #4380029

Part #42050-1/2”#42075-3/4”#42100-1”#42000-Multi-Pack• Reduces Time and Labour• Reduces the chance ofdamaging wires• Turns wire pulling intoa one person job‘SHOEHORNS FOR YOUR WIRE’Two-person wire pulls can be costly. So can cut wires and short circuits. The All American Pull Buddy turns oneset of hands into a ‘crew’. Fast, easy to use and reusable. Why not protect the conductorson all your pulls?Three Sizes Available: 1/2” 3/4” 1”It’s simple...Foam line carriers are expensiveBag-Pipers are cheaper andwork much betterBagB a g3 sizes available to fitconduit 1/2” up to 6”Part #BP05-125 (sm) 1/2” x 1 1/4”#BP150-40 (med) 1 1/2” x 4”#BP20-60 (lg) 2” x 6”#BP05-600 (multi-pack)1/2” - 6”WirePullerFast attachment for conduit pullsNo stripping ortaping required3 Straps per kit1/2” pipe?90˚ bends?Fits EasilyPart #6945530Time is money and when you think about it, a lot of time is spent stripping, taping and untaping wire for fishtape pulls. The SNATCH STRAP gives you back thistime. By staggering the wire, you can pull more conductors with less effort. Plus SNATCH STRAPS can be daisy chained; you can easily drop wire groups at boxesalong the pull. Color coded for easy circuit and phase identification.

"The Smart Way toPull Rope"STOP hurting hands and wrists.STOP breaking expensive fishtape.• Can pull most ropes and fish tapes• Pull more efficiently, faster & safer• Saves an average of 30 minutes based on a 75’ pull• Use both hands ergonomically for maximum pullingstrength without the painSlim but strongsteel roller fitsin your box forsmooth andcontrolledwire pulling!Spring loaded tips keep itlocked in placePart #41100Pat #7,323,637Part #42400LB Wire Guide‘SHOE HORN’ FOR 2” LB’SFeatures• For PVC LB fittings & is adaptableto most metal LB’s• One-person faster conductor installation• Installs in two positions to fitboth ‘Ends’ of the LBPart #42200Two hundred amp services (3/0 wire) can be hard on your knuckles. The LB Wire Guide puts the wire in the pipe & leaves the skin on your fingers.31

Plastic Coated Fiberfish & GlowfishOur Fiberfish and Glowfish rods with a durable plastic coating offer the samegreat performance with no risk of splintering or slivering of the fiberglass.PLASTIC COATED FIBERFISH II3/16” Diameter orange rods.The most versatile of the Fiberfish with our newplastic coating process. Perfect for a wide rangeof installation situations and challenges.KitsPCF207 Fiberfish Kit contains: 1 - 6’ B/F, 4 - 6’ M/F w/ tipsPCF208 3’ Fiberfish Kit contains: 1 - 3’ B/F, 7- 3’ M/F rods w/ tipsPCF230 “FourPack” contains: 1 - 3’ B/F, 3 - 3’ M/F, tip,and FishHook in vinyl pouchReplacement RodsPCF206 6’ Bullnose/Female (B/F) rodPCF210 6’ Male/Female (M/F) rodPCF214 3’ Bullnose/Female (B/F) rodPCF215 3’ Male/Female (M/F) rodPLASTIC COATED GLOWFISH II5/32” Diameter luminous rods.Super flexible glow-in-the-dark rods with our new plastic coatingprocess. Great for tight jobs. The handy clear carry case keepsthem constantly “charged” and ready.KitsGLF407 Glowfish Kit contains: 1 - 6’ B/F, 4 - 6’ M/F w/ tipsGLF408 3’ Glowfish Kit contains: 1 - 3’ B/F, 7- 3’ M/Frods w/ tipsReplacement RodsGLF403 6’ Bullnose/Bullnose (B/B) rodGLF406 6’ Bullnose/Female (B/F) rodGLF410 6’ Male/Female (M/F) rodGLF414 3’ Bullnose/Female (B/F) rodGLF415 3’ Male/Female (M/F) rodFIBERFISH1/4” Diameter yellow rods.The original Fiberfish rods. Stiff enoughfor drop ceilings and flexible enough forinsulated walls.Heavy duty rods for tough pulls.KitsFIB107 Fiberfish Kit contains: 1 - 6’ B/F,2 - 6’ M/F, and 2 - 3’ M/F rods w/ tipsFIB108 3’ Fiberfish Kit contains: 1 - 3’ B/F,5 - 3’ M/F rods w/ tipsFIB130 “FourPack” contains: 1 - 3’ B/F,3 - 3’ M/F, tip, and FishHook in vinyl pouchReplacement RodsFIB103 6’ Bullnose/Female (B/F) rodFIB113 6’ Male/Female (M/F) rodFIB110 3’ Bullnose/Female (B/F) rodFIB114 3’ Male/Female (M/F) rodAttachments & AccessoriesAttachmentsWe’ve re-engineered the attachments to fit both the 3/16” rodsand the 5/32” rods. They will still be compatible with all existingparts in the field, and the cost remains the same.FishHook - Use to retrieve or snag wire & cable.Directional Tool - Offset bend helps guide the Fiberfish around obstructions in walls.Magnet Head - Used with Fish Finder or to catch the ball chain inside wall cavities.Pull Ring - Used to attach multiple wires for larger pulls.Ball Chain - Attach to Fiberfish for interior wall pulls - can be retrieved through smallaccess hole in wall with magnet or Flex-Fish.Wisp Head - Use over suspended ceilings - won’t catch on T-bars.Screw Tip - Screw into the end of small communication wires for faster and easier pulls.32Fiberfish Attachments(1/4” rods)FIB101 Replacement TipFIB105 Fish HookFIB111 Directional ToolFIB112 Magnet HeadFIB118 Pull RingFIB119 Ball ChainFIB122 Wisp HeadFIB125 Screw TipUniversal Attachmentsfor ALL (3/16” rods) AND (5/32” rods)FIB505 Fish HookFIB511 Directional ToolFIB512 Magnet HeadFIB518 Pull RingFIB519 Ball ChainFIB522 Wisp HeadFIB525 Screw Tip

FibersnakesFibersnake Fishtapes and Rodders are designed for use in conduit. The reinforced fiberglass core is jacketed with a plasticcoating for superior flexibility and durability. Non-conductive, so it’s great for conduit with existing wiring.Rust-proof brass tips and fittings.3/16” FIBERSNAKEFIBT50 50’ FibersnakeFIBT100 100’ FIbersnakeFIBT150 150’ FibersnakeFIBT200 200’ FibersnakeFIBT250 250’ FibersnakeFIBT300 300’ FibersnakeRT50 50’ Replacement Rodder onlyRT100 100’ Replacement Rodder onlyRT150 150’ Replacement Rodder onlyRT200 200’ Replacement Rodder onlyRT250 250’ Replacement Rodder onlyRT300 300’ Replacement Rodder only1/4” FIBERSNAKEFIBR200 200’ FibersnakeFIBR250 250’ FibersnakeFIBR300 300’ FibersnakeFIBR350 350’ FibersnakeFIBR400 400’ FibersnakeFIBR450 450’ FibersnakeFIBR500 500’ FibersnakeFIBR550 550’ FibersnakeFIBR600 600’ FibersnakeRR200 200’ Replacement Rodder onlyRR250 250’ Replacement Rodder onlyRR300 300’ Replacement Rodder onlyRR350 350’ Replacement Rodder onlyRR400 400’ Replacement Rodder onlyRR450 450’ Replacement Rodder onlyRR500 500’ Replacement Rodder onlyRR550 550’ Replacement Rodder onlyRR600 600’ Replacement Rodder only5/16” FIBERSNAKEFibersnakes and ReplacementRodders are available in 400’-1000’Fibersnakes Part # FIBL400-FIBL1000Replacement Rodder Part # RL400-RL1000Our 5/16” Fibersnakes are made toorder. Returns due to the wrong sizebeing ordered will NOT be accepted.Please order carefully.Rodder Diameter Recommended conduit Maximum Lengthsizes (in inches)(FIBT) 3/16” ½, ¾, 1, 1¼ 300’(FIBR) ¼” 1, 1 ¼, 1 ½, 2, 2 ½ 600’(FIBL) 5/16” 1 ½, 2, 2 ½ 3, 3 ½, 4 1000’Fibersnakes aredesigned to pull fishline or rope.They are notrecommended forpulling wire and cable.Note: We do not replacefibersnakes broken due toimproper use. However,we will send a repair kit atno extra charge.Super Wrist Magnet• Holds any steel parts• Comfortable to wear all day• Made of rugged 2 mil neoprene• Waterproof• Adjustable band fits virtually anywrist sizePart #WM396Contractor PacksInstaller PackFiberfish II Kit; 1/2"x72" Auger Piranhabit;3/8"x72" HSS Piranhabit; 20' FiberglassTelepole;Attachment Kit; Carry Case.Part #CON100 Installer KitContractor PackFiberfish II Kit; 1/2"x72" Auger Piranhabit;3/8"x72" HSS Piranhabit; 20' FiberglassTelepole; Attachment Kit; Wisp Head;Flex Fish; Steering Guide; 1" Auger Bit;Carry Case.Part #CON200 Contractor PackAttachment KitContains: FishHook, Directional Tool, MagnetHead, Pull Ring, Ball Chain, and 2 replacementtips. Stored in convenient vinyl pouch.FIB120 Fiberfish Attachment Kit (1/4” rods)FIB520 Universal Attachment Kit for ALL (3/16” rods)& (5/32” rods)Master Attachment KitContains same as above plus: Wisp Head,Screw Tip, Flex-FishFIB140 Fiberfish Master Attachment Kit (1/4” rods)FIB540 Universal Master Attachment Kit for ALL(3/16” rods) & (5/32” rods)33

BeforeOUCH!!!...to the LEFT a foot. NotRIGHT...into my foot!These balls will keepyour bits centered.AfterNo more...• Bit walking• Nail hitting• Wall patching• Carpet replacingFits all 3/16” shaftauger bitsKit includes 1 each of1 3/4” & 2 1/4” BallsPart #BB3412PiranhabitsPiranhabits have 3/16" flexible shafts so they can bend while rotating. This allowsdrilling inside wall cavities, through box cut-outs or through other small openings.34Quattro Flex Auger BitsFast and aggressive self feed auger bits,welded to a flexible shaft. Cuts cleanholes. Crossbored at both ends for easywire pulling. Use for wood only.QTT3824 3/8”X24” Auger flexbitQTT3836 3/8”X36” Auger flexbitQTT3848 3/8”X48” Auger flexbitQTT3854 3/8”X54” Auger flexbitQTT3872 3/8”X72” Auger flexbitQTT1224 1/2”X24” Auger flexbitQTT1236 1/2”X36” Auger flexbitQTT1248 1/2”X48” Auger flexbitQTT1254 1/2”X54” Auger flexbitQTT1272 1/2”X72” Auger flexbitQTT91624 9/16”X24” Auger flexbitQTT91636 9/16”X36” Auger flexbitQTT91648 9/16”X48” Auger flexbitQTT91654 9/16”X54” Auger flexbitQTT91672 9/16”X72” Auger flexbitQTT3424 3/4”X24” Auger flexbitQTT3436 3/4”X36” Auger flexbitQTT3448 3/4”X48” Auger flexbitQTT3454 3/4”X54” Auger flexbitQTT3472 3/4”X72” Auger flexbitMore sizes availablePart #FIB-GUDHigh Speed SteelSuperior quality M-2 High Speed Steel drillbit, welded to a flexible shaft. Cuts bothmetal and wood. No need to worry abouthidden nails or metal studs when drilling.FLX1424 1/4”X24” HSS FlexbitFLX1436 1/4”X36” HSS FlexbitFLX1448 1/4"X48" HSS FlexbitFLX1454 1/4"X54" HSS FlexbitFLX1472 1/4"X72" HSS FlexbitFLX3824 3/8”X24” HSS FlexbitFLX3836 3/8”X36” HSS FlexbitFLX3848 3/8”X48” HSS FlexbitFLX3854 3/8”X54” HSS FlexbitFLX3872 3/8”X72” HSS FlexbitFLX1224 1/2”X24” HSS FlexbitFLX1236 1/2”X36” HSS FlexbitFLX1248 1/2”X48” HSS FlexbitFLX1254 1/2”X54” HSS FlexbitFLX1272 1/2”X72” HSS FlexbitGuide ToolAllows the Piranhabits to bend for drillingfrom outside the wall cavity.

ExtensionsFlexible Extensions provide more reach and feature dual set screws for extrastrong hold. Use the 1/4” Extensions for the 3/4” Auger PiranhabitsFIBEX48FIBEX54FIBEX72FIBEX1448FIBEX1454FIBEX14723/16” x 48” Extension3/16” x 54” Extension3/16” x 72” Extension1/4” x 48” Extension for 3/4" bits1/4” x 54” Extension for 3/4" bits1/4” x 72” Extension for 3/4" bits...cuts like a knife through butter!Part #AW34OD-3/4” x 7”#AW78OD-7/8” x 7”Fast Boring Auger BitsDesigned for battery drillsTired of junk auger bits? Rack-A-Tiers found the Star-M brand that has produced quality productsfor over 80 years for professional trades people.Nail Chipper Ship AugerStandard Ship AugerTRI-CUT design with 3precision ground edges forfast, smooth cutting withoutresistance.REDUCES NAILS TO CHIPSwithout grabbing and leaves aclean hole with minimal “blowout.”Precision ground cutting edge forfast cutting of clean holes in wood.Burr-free lead screw for easystarts and pull-through withoutmaterial build-up.Nothing but the Best!• BURR-FREE LEAD SCREW• LIGHT WEIGHT• CARBON STEEL CONSTRUCTIONWith precise heat-treat and hardeningprocesses for strength and durability.18” Auger BitsAW3818 3/8"AW1218 1/2"AW11618 11/16"AW3418 3/4"AW7818 7/8"AW118 1"AW1418 1 1/4"7 1/2” Auger BitsAW3807 3/8"AW1207 1/2"AW11607 11/16"AW3407 3/4"AW7807 7/8"AW107 1"To order Tri-Cut Bitsadd a ‘T’ to the part #’s“That’s getting closer—now try a few feet to the left!”35

STEEL STUDBUSHINGSFits all Standard Steel Studs & PunchesPart #SB240• ONE PIECE• ONE HAND INSTALLATION• FIRE RATED V.O.• Why Square Bushing? 70% morecross sectional area!• More cables, easier pullsNo Tools RequiredFASTER, EASIER TO USEPart #SB220PLASTIC KNOCKOUT FILLERSFeatures:• No tools required• Snap in with ease• Snap out with ease• Non-conductive, saferFits thin (1/32”) and thick(1/8”) wall thickness.Available in 1/2” through2” trade designations.“Take the fight out of thoseKO’s with KO Killers!!”All thumbs? Good, because that’s all you need to install our plastic KO Killers. Just pop’em in. No more tools, hammers, flying metal fillers, exploding buss bars,etc. Needing no tools is a big plus, especially when working space is tight.Part #KOK SeriesVersatile Utility Strap with a FirmHold & Quick Release!1” straps• Holds anything up to 33lb per sq. inch• Quality hook and loop fastener with superior shearstrength rating• Double sided hook and loop may be used with softside up or down• Made with heavy duty Velcro• Great for data cable• Available in 1/2” x 12” and 1”x 12” strips361/2” strapsPart #RS1005 1/2”#RS1010 1”

FAN BOXCeiling (Paddle) Fansto 70lb/32kgFeatures• BIG 26 Cubic Inch Capacity• 2 Fixture Mounting Screws• Built in Cable Clamps• 2 Hour Fire Wall RatedRED COLOR BENEFITS• Fire Alarm Bells• Smoke/Heat Detectors• Exit Lights• Emergency LightingFIREALARMBOXPart #SB400CodeViolationCodeCompliantBox Mounting Plate• Allows for stub up fittings• Code compliant• Pre-punched for 4”x4” boxesPart #SO550RAT 5001/2”Part #RAT500RAPID FIRE 1 ROMEX ® CONNECTORSRAT 7503/4”Part #RAT750FAST • NO LOCKNUTSEASY • NO TOOLS RE QUIREDTT 500OutsideTOM TWO WAYOLD WORK, NEW WORKINSTALLS FROM INSIDEOR OUTSIDE THE BOXRAT 7503/4”RAT 500 & TT 5001/2”Single Cables: 8/3, 6/3Single Cables:Two Cables:14/2, 14/3, 12/2, 12/3, 10/2, 10/314/2, 14/3, 12/21/2”1ROMEX ® , a nonmetallic building electrical wire, is a registeredPart #TT500Trademark of Southwire Company.Doing some renovation work? The TT500 also installs from the inside of the box after the wire is fished in. Ingenious. The RAT500 and RAT750 feature the samequality and large wire capacity but install from the outside for use in new construction. If you like the best, try these.InsideLOW VOLTAGE DATA/COMMUD RINGHOW DOES IT WORK?Alignment tabs reachacross wood/metalstuds to level lowvoltage outlets withA.C. boxes.levelNo tape measure • No level requiredAvailable in 1/2”, 5/8” and 1” riseEXTRA OFFSET:• Allows use of all standard fittings• Reduces A.C. interference to low voltage devices• Improves drywall finishPart #LJ50R#LJ58R#LJ100RIf you’re fussy about your rough-in layout, the Level Jack makes life easy. If you’re not, no one will notice because you can’t screw up with the Level Jack. Just clip it onto the AC box and screw it down. No level, no tape measure, no special boxes, no special fittings required. Level Jacks fit most AC boxes. See the cartoon for details.37

Straight from the Inventor’s Think TankNo moregettingcaught upin insulationor otherobstacles!!Part #42614–1/4” for #14-12 MC Cable#42638–3/8” for #10 MC CablePart #42600Kit includes 1 eachfor 1/2” & 3/4” Flex• Flexible metal conduit pulling tool easilyscrews onto exterior of MC cable andprovides a hook to pull cable.• Easy way to pull flexible conduit. Simplythread into interior of flexible conduit, hookonto your string or fish tape and pull!The Ultimate, Labor Saving,Installation Tool.• LaserLine will accurately install a pull line up to 120ft. Through mostweb trusses, across suspended ceiling systems, over hard to moveobjects, under sub-flooring or in any limited access areas like thosefound in most offices and commercial building structures.• Cuts labor costs and improves production.• Ability to span over heavy and hard to move objects found in manycommercial structures.• Replacement line and darts availableOperationOnce the route has been established, just aimyour LaserLine laser sight at the proposed pathfor your install, pull the trigger. Now that youhave your pull line in place, simply attach yourcable or a pull line and pull your cables across.Once your cable is in place, supports can beplaced (typically at 5 foot intervals) with thepoint-to-point routes determined and the cablesupports in place. Productivity is improved andlabor intensity is decreased.38Kit Includes:• 2 Pull Line - 17lb. Nylon bulk line (1200ft. Per spool.)• LaserLine - CNC machined from high quality aircraft aluminum with an anodized finish.• Laser sight for accuracy.• 3 Darts - Constructed from durable lightweight nylon with soft foam tip.• 2 CO 2 - 12 gram cartridge (8-10 shots each).• Sturdy carry casePart #83000

Research & Development CornerNew ProductsComing Soon• New hand-sized level equippedwith powerful magnets sticks whenyou need it to!• Check out the innovative designallowing you to hold conduitbetween level and surface.Pat # 7,520,065Part #45505• Unique dual-ended tool made ofhardened steel to remove all sizes ofcable staples with ease.• Even the most stubborn staples are nomatch for the Staple Shark!• A new way to strip NMSC cable• Easily attaches to most wire strippers• Strips cable in or out of electric boxes with push action• Virtually eliminates nicking or cutting the wire insulatorboltcutternutPart #52455Pat # 6,745,473Part #47010It’s not alwaysabout work...lifeis short have fun!Includes handyNail Puller and Pry Barfor multi-purpose use!39

“A quick thank you for the practicaland innovative time saving tools yousource and supply. Have boughta few tools, and have been veryimpressed. It is obvious that many ofthese tools have been either madeby, and for tradesman.”Thank youJames P.Armstrong, BCTestimonials“You’ve tapped into a fairly unknownmarket and from the looks of it, youtook the best of the best... Reel-End,Rack-A-Tiers ® , Bend All, Croc’sNeedle Nose Wire Strippers, LB WireGuide, The All American Pull Buddy,The Lock Hard... ALL GENIUS!...you know as well as I do, TIME ISMONEY.”Thank youEric D.Professional ElectricianSilsbee, TX“I’ve bought a ton of Rack-A-Tiersproducts. The Hoppy Benders seedaily use and the tools are unique. Iespecially like the Pocket Kart. Thereare more Rack-A-Tiers products Iam just dying to order and try out onthe job!!”ThanksDonnie A.Electrical JourneymanMoncton, NBDo you have an invention? Yours could be in the next catalogue!Did you know...Did you know thatRack-A-Tierswas founded byreal electriciansjust like us?I sure did.Almost all of theirproducts are inventedby guys working outin the field.Maybe that’s why all their productssolve the real problems weface every day.It’s why we get the jobs done faster,easier, and safer every time.Well... except for lastweek when youforgot to use ourPlate Vise ya Goon!Hmm... so that’swhat went wrong.In the USA:PMB 221136 East 8 th St.Port Angeles WA. 98362-6129www.RACK-A-TIERS.comFax: 1-250-479-1489Toll Free: 1-888-939-9991©2011 Rack-A-Tiers75M 1005 01/11