Network IP Camera - Edimax

Digital I/O User ManualDI/DO connector – Use in applications for e.g. motion detection, eventtriggering, SD recording and alarm notifications via FTP/EMAIL/SAMBA.•Digital output — For connecting external devices such as relays, alarmbell or LEDs. Connected devices can be activated by theConfigurationEvent interface or digital output buttons on the Homepage.Pin Notes SpecificationsTrigger is “Off”, DO connect to GND Max load:Trigger is “On”, DO is floating30mA,30VDCPlease refer to the following illustration for DO connection methodCAMERAHDORLTriggerPowerGNDGND•Digital input — An alarm input for connecting devices that can togglebetween an open and closed circuit, for example: PIRs, door/windowcontacts, glass break detectors, etc. When a signal is received the statechanges and the input becomes active.Pin Notes SpecificationsDI is floating, trigger is “high”Max current input:DI is high, trigger is “low”30mA65