Network IP Camera - Edimax
Network IP Camera - Edimax Network IP Camera - Edimax
SD card deviceUpgradeSD card.Upgrade IP camera’s firmware. Click ‘Browse’ button to select afirmware image file on your computer first, then click ‘Upgrade’button.3-15 LanguageYou can change the display language of web interface.Click ‘Language’ button and select one language. More languages mayavailable in latest firmware file.63
Chapter V TroubleshootingPlease don’t panic when you found this IP Camera is not working properly.Before you send this IP Camera back to us, you can do some simple checksto save your time:ProblemdescriptionCan’tconnect toIP CameraNo IPCamerafoundNo imagePossible solution(s)1) Please check the IP address of IP Camera again.2) Please make sure the network cable is correctlyconnected to your local area network.3) Please make sure power cable is correctly connected toIP Camera.4) Please make sure IP Camera is switched on (the LEDlights on IP Camera will light up).1) ‘Auto search’ function only works on IP Cameras locatedon local area network.1) If the place where IP camera is installed is too dark, tryto add some lights when possible.2) Check if there’s anything covering the lens.RTSP URL1) Main Stream (H.264/MPEG4)RTSP://IP address :RTSP port/stream12) MJPEGRTSP://IP address :RTSP port/stream23) Mobile ViewRTSP://IP address :RTSP port/mobile64
- Page 14 and 15: Chapter II Using Network IP Camera
- Page 16 and 17: If you need to change a certain IP
- Page 18 and 19: For IE 9:Click ‘Install’ button
- Page 20 and 21: NOTE:If this is the first time you
- Page 22 and 23: ‘Connect’ buttonIf you want to
- Page 24 and 25: 2.4 Client SettingsIn ‘Client Set
- Page 26 and 27: Chapter III Advanced ConfigurationI
- Page 28 and 29: Daylight SavingKeep the currentdate
- Page 30 and 31: Here are the descriptions of every
- Page 32 and 33: DHCP IPv4 / IPv6: Obtain both IPv4
- Page 34 and 35: 3-3-2 ‘Advanced’ setup pageYou
- Page 36 and 37: 3-4 IP FilterWhen this IP camera is
- Page 38 and 39: 3-5 VideoYou can adjust the image o
- Page 40 and 41: Power LineFrequencyCondition(ABW)WD
- Page 42 and 43: 640x480 (VGA)/ 320x240 (QVGA)Frame
- Page 44 and 45: Overlayshow certain text / picture
- Page 46 and 47: 3-7 MotionThis IP camera is capable
- Page 48 and 49: 3-8 PTZ ControlIf you mount the IP
- Page 50 and 51: 3-9 EventWhen there’s an event, y
- Page 52 and 53: To add a new event, click ‘New’
- Page 54 and 55: 3-9-3 Event ServerYou can define th
- Page 56 and 57: SMTP ServerCheck this box to enable
- Page 58 and 59: 3-10 Recording to Micro SD CardWhen
- Page 60 and 61: Set the time range then click “Se
- Page 62 and 63: 3-13 Device InfoYou can check the i
- Page 66 and 67: Digital I/O User ManualDI/DO connec
- Page 68 and 69: Federal Communication Commission In
- Page 70 and 71: EU Declaration of ConformityEnglish
- Page 72 and 73: Declaration of ConformityWe, Edimax
- Page 74 and 75: TERMS AND CONDITIONS FOR COPYING, D
- Page 76: 8. If the distribution and/or use o
SD card deviceUpgradeSD card.Upgrade <strong>IP</strong> camera’s firmware. Click ‘Browse’ button to select afirmware image file on your computer first, then click ‘Upgrade’button.3-15 LanguageYou can change the display language of web interface.Click ‘Language’ button and select one language. More languages mayavailable in latest firmware file.63