Network IP Camera - Edimax

More documents

Recommendations

Info

3-3-2 ‘Advanced’ setup pageYou can setup advanced network settings in this page. This page isintended for advanced settings only, and this IP camera will work fine evenyou don’t make any changes to this page.Here are the descriptions of every setup item:ItemMulticastDescriptionEnable video multicast:Multicast Group Address: Input multicast groupaddress here, must be an address between 232.0.0.0 to232.255.255.255.Multicast video port: Input port number for video multicasthere.Multicast RCTP video port: Input port number for RCTPvideo here.33
Multicast audio port: Input port number for audio here.Multicast RCTP audio port: Input port number for RCTPaudio here.BonjourQoSDDNSMulticast TTL: Input TTL value for multicast here.If you’re using MacOS and you have Bonjour installed, youcan use it to discover this IP camera.Enable QoS to improve the data transfer priority of this IPcamera (Your local area network must support QoS).You can select Video / Audio’s QoS DSCP value (0 to 63), orboth video and audio.Enable DDNS support if your ISP assigns dynamic IP addressto you. You must register a dynamic IP service first. Currentlythis IP camera supports Dyndns, TZO and No-IP dynamic IPservice.Provider: Select dynamic IP service provider.Host Name: Input the host name you obtained fromdynamic IP service provider.User name: Input user name used to login dynamic IPservice provider.HTTPSPassword: Input the password used to login dynamic IPservice provider.*The user name and password should be under 16characters.Check ‘Enable HTTPS’ box to enable HTTPS channel toencrypt transferred data. You can also define HTTPS portnumber in ‘HTTPS Port’ field if you don’t want to use defaultvalue ‘443’.When you finish, click ‘Apply’ to save changes.34
Page 1 and 2: VD-233EDUser Manual08-2013 / v1.1
Page 3 and 4: 3-8 PTZ Control ...................
Page 5 and 6: 1.2 Key feature of this network IP
Page 7 and 8: 1.4 Packaging ContentsPlease check
Page 9 and 10: Rear Cover:56 7,813211104912ItemDes
Page 11: 2-1. Please refer to the definition
Page 14 and 15: Chapter II Using Network IP Camera
Page 16 and 17: If you need to change a certain IP
Page 18 and 19: For IE 9:Click ‘Install’ button
Page 20 and 21: NOTE:If this is the first time you
Page 22 and 23: ‘Connect’ buttonIf you want to
Page 24 and 25: 2.4 Client SettingsIn ‘Client Set
Page 26 and 27: Chapter III Advanced ConfigurationI
Page 28 and 29: Daylight SavingKeep the currentdate
Page 30 and 31: Here are the descriptions of every
Page 32 and 33: DHCP IPv4 / IPv6: Obtain both IPv4
Page 36 and 37: 3-4 IP FilterWhen this IP camera is
Page 38 and 39: 3-5 VideoYou can adjust the image o
Page 40 and 41: Power LineFrequencyCondition(ABW)WD
Page 42 and 43: 640x480 (VGA)/ 320x240 (QVGA)Frame
Page 44 and 45: Overlayshow certain text / picture
Page 46 and 47: 3-7 MotionThis IP camera is capable
Page 48 and 49: 3-8 PTZ ControlIf you mount the IP
Page 50 and 51: 3-9 EventWhen there’s an event, y
Page 52 and 53: To add a new event, click ‘New’
Page 54 and 55: 3-9-3 Event ServerYou can define th
Page 56 and 57: SMTP ServerCheck this box to enable
Page 58 and 59: 3-10 Recording to Micro SD CardWhen
Page 60 and 61: Set the time range then click “Se
Page 62 and 63: 3-13 Device InfoYou can check the i
Page 64 and 65: SD card deviceUpgradeSD card.Upgrad
Page 66 and 67: Digital I/O User ManualDI/DO connec
Page 68 and 69: Federal Communication Commission In
Page 70 and 71: EU Declaration of ConformityEnglish
Page 72 and 73: Declaration of ConformityWe, Edimax
Page 74 and 75: TERMS AND CONDITIONS FOR COPYING, D
Page 76: 8. If the distribution and/or use o

Network IP Camera - Edimax

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?