Network IP Camera - Edimax

More documents

Recommendations

Info

DHCP IPv4 / IPv6: Obtain both IPv4 and IPv6 address from DHCPserver on LAN automatically.Static IPv4 / IPv6: Assign an IPv4 / IPv6 address to IP cameramanually. If you don’t have a DHCP server on your local areanetwork, you must use this option to specify an IP address.IP Address(IPv4): Input IPv4 IP address*IP Address(IPv6): Input IPv6 IP address*Prefix Length: Input IPv6 IP address’ prefix length(0-128)Subnet Mask: Input subnet maskGateway: Input gateway addressPrimary DNS: Input DNS server’s IP addressSecondary DNS: Input backup DNS server’s IP address, youcan leave this field blank.* You can leave this field blank, if you only wish to use IPv4 orIPv6 IP address.Enable UPnP Discovery: Check this box to enable other deviceson network to discover the presence of this IP camera by UPnP.It’s recommended to enable this function.PPPoEHTTP PortRTSP PortEnable UPnP Port Mapping: When UPnP is enabled, check thisbox to enable UPnP’s port mapping.Select this option to use PPPoE to connect to network. You haveto input PPPoE username and password assigned by networkoperator to get connected.Input IP camera’s web connection port number here. When thisport number is changed, you need to change web browser’s portnumber you used to connect to IP camera.For example, IP camera’s IP address is 192.168.2.3, and if youchanged HTTP port number to 82, please input‘http://192.168.2.3:82’ in web browser’s address bar to access IPcamera’s web configuration interface.Input RTSP port number. When this port number changes, you31
RTP DataPortmust change corresponding settings in external network devices(NVR or CMS software) so they can receive this IP camera’s video.Input RTP data port number here.When you finish with above settings, click ‘Apply’ button to save changes.32
Page 1 and 2: VD-233EDUser Manual08-2013 / v1.1
Page 3 and 4: 3-8 PTZ Control ...................
Page 5 and 6: 1.2 Key feature of this network IP
Page 7 and 8: 1.4 Packaging ContentsPlease check
Page 9 and 10: Rear Cover:56 7,813211104912ItemDes
Page 11: 2-1. Please refer to the definition
Page 14 and 15: Chapter II Using Network IP Camera
Page 16 and 17: If you need to change a certain IP
Page 18 and 19: For IE 9:Click ‘Install’ button
Page 20 and 21: NOTE:If this is the first time you
Page 22 and 23: ‘Connect’ buttonIf you want to
Page 24 and 25: 2.4 Client SettingsIn ‘Client Set
Page 26 and 27: Chapter III Advanced ConfigurationI
Page 28 and 29: Daylight SavingKeep the currentdate
Page 30 and 31: Here are the descriptions of every
Page 34 and 35: 3-3-2 ‘Advanced’ setup pageYou
Page 36 and 37: 3-4 IP FilterWhen this IP camera is
Page 38 and 39: 3-5 VideoYou can adjust the image o
Page 40 and 41: Power LineFrequencyCondition(ABW)WD
Page 42 and 43: 640x480 (VGA)/ 320x240 (QVGA)Frame
Page 44 and 45: Overlayshow certain text / picture
Page 46 and 47: 3-7 MotionThis IP camera is capable
Page 48 and 49: 3-8 PTZ ControlIf you mount the IP
Page 50 and 51: 3-9 EventWhen there’s an event, y
Page 52 and 53: To add a new event, click ‘New’
Page 54 and 55: 3-9-3 Event ServerYou can define th
Page 56 and 57: SMTP ServerCheck this box to enable
Page 58 and 59: 3-10 Recording to Micro SD CardWhen
Page 60 and 61: Set the time range then click “Se
Page 62 and 63: 3-13 Device InfoYou can check the i
Page 64 and 65: SD card deviceUpgradeSD card.Upgrad
Page 66 and 67: Digital I/O User ManualDI/DO connec
Page 68 and 69: Federal Communication Commission In
Page 70 and 71: EU Declaration of ConformityEnglish
Page 72 and 73: Declaration of ConformityWe, Edimax
Page 74 and 75: TERMS AND CONDITIONS FOR COPYING, D
Page 76: 8. If the distribution and/or use o

Network IP Camera - Edimax

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?