ML10/MP10 46-60" LCD Video Wall Mount Instruction Sheet
ML10/MP10 46-60" LCD Video Wall Mount Instruction Sheet ML10/MP10 46-60" LCD Video Wall Mount Instruction Sheet
11. To avoid damage to the display it is advised to leave a minimum 1 mm (0.04”) gap so the weightof the panels do not rest on the panels underneath. It may be necessary to re-adjust the verticalposition to prevent this.12. Always adjust the X position of panels individually versus pushing an entire row left to right. Forexample, if you are constructing a 3x3 video wall push the panels individually from the right andleft sides, towards the center of the wall.12 of 22 ML10/MP10 LCD Video Wall Mount Instruction Sheet020-100726-05 Rev. 1 (07-2013)
ATTACH ADAPTER BRACKETS TO DISPLAY13. Attach the adapter brackets to the back of the display using 4 M6 x 12 mm socket pin screws witha nylon shoulder washer, or 4 M8 x 15 mm socket pin screws, as shown below.NOTE: The hardware to attach the dedicated plates to the mount are included with the dedicatedplates.Landscape OrientationDisplayWasherSocket pin screwMAX VESA-700 mmMIN VESA-200 mmAdapter brackets400 mm 300 mm 200 mm PLPPortrait OrientationAdapter bracketsDisplayWasherSocketpin screw600 mm400 mm300 mm 200 mm MAX VESA-400 mmMIN VESA-200 mmML10/MP10 LCD Video Wall Mount Instruction Sheet 13 of 22020-100726-05 Rev. 1 (07-2013)
- Page 6 and 7: INSTALLATION TO SOLID CONCRETE OR C
- Page 8 and 9: INSTALLATION TO F100 FRAMEVerify th
- Page 10: 7. Adjust the bottom knob of the ad
- Page 15 and 16: PULL OUT MOUNT ASSEMBLY ADJUSTMENT1
- Page 17 and 18: Adapter Bracket Adjustment - Landsc
- Page 19 and 20: OPEN AND CLOSE PULL OUT MOUNT ASSEM
- Page 21 and 22: CLOSE ADAPTER BRACKETSNOTICE: Take
ATTACH ADAPTER BRACKETS TO DISPLAY13. Attach the adapter brackets to the back of the display using 4 M6 x 12 mm socket pin screws witha nylon shoulder washer, or 4 M8 x 15 mm socket pin screws, as shown below.NOTE: The hardware to attach the dedicated plates to the mount are included with the dedicatedplates.Landscape OrientationDisplayWasherSocket pin screwMAX VESA-700 mmMIN VESA-200 mmAdapter brackets400 mm 300 mm 200 mm PLPPortrait OrientationAdapter bracketsDisplayWasherSocketpin screw600 mm400 mm300 mm 200 mm MAX VESA-400 mmMIN VESA-200 mm<strong>ML10</strong>/<strong>MP10</strong> <strong>LCD</strong> <strong>Video</strong> <strong>Wall</strong> <strong>Mount</strong> <strong>Instruction</strong> <strong>Sheet</strong> 13 of 22020-100726-05 Rev. 1 (07-2013)
Change language