Application for the Reassessment of a Hazardous Substance under ...

Code I29 Regs 51, 52 Signage requirementsCode I30 Reg 53 Advertising corrosive and toxic substancesHazardous Substances (Tank Wagon and Transportable Containers) Regulations 2004Controls for Stationary Container Systems, Secondary Containment and UnintendedIgnition of Flammable Substances (GN35A)The controls relating to stationary container systems, secondary containment and unintendedignition of flammable substances, as set out in Schedules 8, 9 and 10 respectively of theHazardous Substances (Dangerous Goods and Scheduled Toxic Substances) Transfer Notice2004 (Supplement to the New Zealand Gazette, 26 March 2004, No. 35, page 767), asamended, shall apply to this substance, notwithstanding clause 1(1) of Schedules 8 and 9 andclause 1 of Schedule 10.variation:Schedule 10 of the Hazardous Substances (Dangerous Goods andScheduled Toxic Substances) Transfer Notice 2004f Clause 1 This clause applies as if the words ―every class 2 and every class3.1 hazardous substance described in Schedule 1‖ was replaced by:‖this substance‖.Clause 33 This clause applies as if the words ―Subject to subclause (2)‖ insubclause (1) were omitted.This clause applies as if subclause (2) were omitted.Table J.3:Additional controls for dichlorvosAdditional controls for dichlorvos1 Prohibition on use of dichlorvos(1) No person may use dichlorvos for any purpose other than—(a) for research and development; or(b) as an ingredient or component in the manufacture of another substance orproduct.(2) Despite subclause (1)(a), research and development using dichlorvos does notinclude investigation or experimentation in which the substance is discharged,laid or applied in or to the outdoor environment.2 Specification of pesticide and veterinary medicine actives(1) Any person who—(a) manufactures or imports into New Zealand dichlorvos, which that personhas not previously manufactured or imported on or before 1 July 2006; or(b) had previously manufactured or imported a hazardous substance listed inTable 1 of Schedule 1 on or before 1 July 2006, but that person has sincemodified the manufacturing process or changed the source of manufacturefor that hazardous substance, must provide to the Authority in writing theinformation required by subclauses (3) and (4).(2) The information required by subclause (1) must be provided—(a) in the case of a substance that is manufactured in New Zealand prior tothat substance being sold to another person or used in accordance withclause 1 of Schedule 3; or(b) in the case of a substance that is imported into New Zealand, prior to thatsubstance being imported; and(c) in the case of a substance to which subclause (1)(b) applies—(i) each and every time the manufacturing process or source ofmanufacture is changed; and(ii) include equivalent information for the substance that was producedby the manufacturing process before it was modified, or suppliedDichlorvos reassessment – application Page 407 of 436