PRECISION TOOLS CATALOGUE - Trade Tools

protractors, angle meter, v-blocks & level359 SERIES - UNIVERSAL BEVELVERNIER PROTRACTOR3566 series - dual-vee magneticv-block3566C359BZThese tools are designed for precisionmeasuring and for laying out angles. Theprotractor is one of the most valuable anduseful tools for the kit of every good toolmaker,inspector or machinist.• Satin chrome finish on all reading surfaces.• Sharp, machine divided graduations.• Machine divided graduations read to 5minutes (1/12 of a degree) and accuracy isfiner than can be read.• The most convenient, ultra sensitive fineadjustment for precision setting.Starrett Magnetic V-Blocks are designed forversatility and accuracy. All working surfacesare precision ground with typical Starrettaccuracy to provide convenient set-ups forinspection and light machining.• A powerful, permanent magnet iscontrolled by a rotary switch and providessufficient holding power for positivelocation.Cat No Dimensions Capacity Type Item No3566 95 x 70 x 95mm 44mm Individual DB627Cat No Length Graduation Item NoC359DZ 300mm / 12” 5 min. or 1/12 degree CN282v-blocks & clamps19 & 183 series - steel protractorsC19Starrett C19 and C183 Steel Protractors arehighly useful and accurate tools for settingbevels, transferring angles, small squaringtasks, checking cutter clearances withincertain limits and many other applications.C183 Series has a rectangular head, thusproviding four convenient working edges.AM-2 - angle meterC183• Double graduations from 0 -180° inopposite directions permitting the directreading of angles and supplementaryangles.• The back of the tool is flat for ease of use.• The blade can be locked firmly at anyangle by the lock nut.• Satin chrome finish for ease of reading andresistance to rust.Cat No Blade Length Range Head Type Item NoC19Semi-Circular BI572150mm / 6” 0 - 180°C183 Rectangular BV642Starrett No. 278 V-Blocks are precisionground to extreme accuracy. The vees arecentral, parallel and square with the ends andsides.278• Blocks are made of steel, hardened andground and numbered in series so that thevees in each set are always in alignment.Cat No Dimensions Range Type Item No278 40 x 32 x 32mm 25mm / 1” Pair CJ612568C 75 x 63 x 50mm 50mm / 2” Pair DB952578 133 x 86 x 75mm 100mm / 4” Individual DC7703097 series - precision levelStarrett AM-2 Angle Meter offers a fast, easyand inexpensive way to measure angles.• Large, readable scale for accuratereadings from 0-90° in any quadrant.• Magnetic base frees hands when used onferrous surfaces.• Measures any angle for pitch or slope.• Handy rise, run, angle and pitchinformation on back of tool.• Main vials have seven graduations on eachside of the bubble.• Auxiliary level vial shows lateral positionand assists in horizontal setting.Supplied In Aluminium Case• Special alloy iron used to obtain freedomfrom thermal effects.• One division equals 0.02mm/M or(0.0005”) of an inch per foot.Cat No Dimensions Item NoAM-2 125 x 125mm DS0002Cat No Length Item No3097Z 200mm DR9052022