PRECISION TOOLS CATALOGUE - Trade Tools

dial gauge standsmagnetic base indicator holders665 Series - DIAL GAUGE STAND3657aa With FineAdjustmentC3657MTW Flex-O-PostIndicator HolderBA660 With Triple JointedArm & Fine AdjustmentThis is the most versatile dial indicator holderwith an extremely stable base (A) that is215mm (8.1/2”) long x 57mm (2.1/4”) wideat the bottom. It can inspect workpieces onthe top surface of the ground base or withina working area defined by the 200mm (8”)upright base post (B) and the 238mm (9.1/2”)long gauge-holding rod (C). The base postcan be conveniently located anywhere alongthe 215mm (8.1/2”) T-slot in the base.Please note that the indicator is soldseperately.Cat No Length of Base Height Total Gauge Holding Rod Length Item No665Z 215mm 200mm 238mm DH180661A Mini Magnetic Base &Indicator Holder653 series - dial GAUGE STANDwith cast iron baseStarrett Magnetic Base Indicator Holders arefor use with all Starrett Test, Back Plunger,AGD, Dial and Miniature-Dial Indicators. Alsoaccommodates similar indicators of othermanufacturers.The Starrett 3657MTW is supplied completewith the flexible post, assembled of shorttubular steel sections and precision balljoints, linked by an internal steel cable. It canbe adjusted to any position and locked byturning a lever near the magnetic base.The Starrett 660 Series Magnetic BaseIndicator Holder with Triple-Jointed Arm iscompact and versatile and comes completewith three adjustable pivots controlledby a single knob for fast, easy indicatorpositioning.Cat No Dimensions Height Total Column Item No3657AA 63 x 55 x 50mm 230mm Standard DJ6003657MTW380mm Vertical Reach250mm Horizontal ReachThe new Starrett 661A Mini Magnetic Baseand Indicator Holder is ideal when using adial test indicator or universal indicator.Simple moveability for set up and adjusting.• Very sensitive fine-adjustment thumb screwon 3657AA and 660.• 660 Series - Small but, powerful magneticbase, with 70lbs holding force.• 660 Series - Articulating arm with powerfulcentral locking knob, provides full 360°horizontal positioning and over 180°vertical positioning.• 661 Series - NEW DESIGN. Universalmechanical device and extension stem.• 661 Series - Simple to use.250mm Flexible Post DG752This bench type comparator is ruggedly builtfor in-process and final inspection work.The dial indicator can be adjusted verticallyand locked in any position. A sliding ringwith locking screw below the beam permitsswinging the indicator to either side. The ringalso acts as a safety device, preventing thebeam from accidentally dropping.There is a fine adjustment on the beam forfinal indicator setting.The hand lifting lever on the indicator raisesthe spindle and releases it to contact thework.Vertical capacity 235mm (9.1/4”) and throatdepth of 125mm (5”) and a vertical indicatorfine adjustment of up to 12.7mm (1/2”).Please note that the indicator is soldseperately.660 40 x 35 x 30mm 190mm 3 Adjustable Pivots DG912661A 30mm Base Diameter 103mm Mini Standard DG915Cat No Description Item No653 Comparator With Cast Iron Base, Without Indicator DF68717