PRECISION TOOLS CATALOGUE - Trade Tools
PRECISION TOOLS CATALOGUE - Trade Tools PRECISION TOOLS CATALOGUE - Trade Tools
micrometerS & Accessories234 SERIES - PRECISION END MEASURINGRODS486 SERIES - BLADE TYPE MICROMETERSWITH NON-ROTATING SPINDLEThese rods or “standards” are for checkingand setting micrometers of 50mm (2”)capacity and larger, and are also usedon machine tools for comparing gauges,checking precision measuring tools, parallelsurfaces, and many other types of work.Cat No Range Item No234MA-25 25mm CC437234MA-50 50mm CC442234MA-75 75mm CC447234MA-100 100mm CC452234MA-125 125mm CC457234MA-150 150mm CC462234MA-175 175mm CC467234MA-200 200mm CC472234MA-225 225mm CC477234MA-250 250mm CC482234MA-275 275mm CC487234MA-300 300mm CC492234 Rod With Insulating Handle• Manufactured from a special tool steel.• Hardened ends and accurately lapped to aspherical radius.Cat No Range Item No234A-1 1” CC317234A-2 2” CC322234A-3 3” CC327234A-4 4” CC332234A-5 5” CC337234A-6 6” CC342234A-7 7” CC347234A-8 8” CC352234A-9 9” CC357234A-10 10” CC362234A-11 11” CC367234A-12 12” CC372The Starrett 486 Series is designed for fastand accurate measurements of circular formtools, diameter and depth of narrow grooves,slots, keyways, recesses and depths betweenlands and fins.Cat No Range Graduation Item No486MP-250 - 25mmCZ142486MP-50 25 - 50mm CZ1520.01mm486MP-75 50 - 75mm CZ162486MP-100 75 - 100mm CZ172• Non-rotating spindle prevents bladefrom turning in narrow slots or rolling offshoulder.• Blade thickness is 0.8mm.• Blades will measure to 8mm depths.• Starrett satin chrome finish - no glare -resists rust.Cat No Range Graduation Item No486P-1 0 - 1”CZ082486P-2 1 - 2” CZ0920.001”486P-3 2 - 3” CZ102486P-4 3 - 4” CZ112256 SERIES - DISC TYPE MICROMETERSWITH ROTATING OR NON-ROTATING SPINDLES234 Rods are also available without insulating handle. Cat No. changes to 234MB.Please note that these standards are supplied with all micrometers that are furnished withstandards.224 SERIES - OUTSIDE MICROMETERSWITH INTERCHANGEABLE ANVILSThese tools are used to measure thethickness of work sections such as ribs,lands, fins, cutting edges on form tools andchordal thickness of gear teeth. Because oftheir large anvil and spindle faces, they arealso useful for measuring the thickness ofsheet materials like paper, rubber, cardboardand plastics.• Exremely hard and stable one piecespindle (the heart of our accuracy).• Micro lapped measuring faces.• Tapered frame designed specifically for usein narrow slots and tight places.• Balanced frame and thimble design insureeasy handling and better readability.Unusual flexibility, plus a wide range ofmeasurement makes the Starrett No.224Series satin-chrome micrometers verypopular in machine or automotive repairshops and for all applications requiring aversatile micrometer.Graduation 0.01mm10Cat NoRangeStandards(mm)Item No224MAARLZ 0 - 100mm 25, 50, 75 BZ742224MARLZ50 - 150mm50, 75, 100,125224MGRLZ 150 - 300mm 150,175,200,225,250,275224MDRLZ224MERLZ224MJRLZ300 - 400mm400 - 500mm500 - 600mm300, 325,350, 375400, 425,450, 475500, 525,550, 575BZ747BZ757BZ767BZ772BZ777224marlz• Starrett satin chrome finish - no glare andresists rust.• Advanced sleeve design with staggeredlines and distinct figures for precise andeasy readability.• Large thimble diameter with distinctfigures.Graduation 0.001”Cat NoRangeStandards(Inches)Item No224AARLZ 0 - 4” 1”, 2”, 3” BZ702224ARLZ 2 - 6” 2”, 3”, 4”, 5” BZ707224BRLZ 6 - 9” 6”, 7”, 8” BZ712224GRLZ 6 - 12”6”, 7”, 8”, 9”,10”, 11”BZ717224CRLZ 9 - 12” 9”, 10”, 11” BZ714224DRLZ 12 - 16”224ERLZ 16 - 20”224JRLZ 20 - 24”12”,13”,14”,15”16”,17”,18”,19”20”,21”,22”,23”BZ727BZ732BZ737Cat No Range Graduation Item No256MRL-25CH3680 - 25mm256MPN-25*CH3770.01mm256MRL-50 25 - 50mm CH387256MRL-75 50 - 75mm CH397* Non-Rotating Spindle222 SERIES - SHEET METAL MICROMETERsThese micrometers reach over the edge ofsheet metal and take measurements awayfrom the edge towards the centre.Cat No Range Graduation Item No256RL-1CH3270 - 1”256PN-1*CH3320.001”256RL-2 1 - 2” CH337256RL-3 2 - 3” CH357• Balanced frame and thimble design insureeasy handling and better readability.• 150mm throat depth.Cat No Range Anvil Graduation Item No222MBXR-250 - 25mm0.01mmBZ482Flat222BXR-1 0 - 1” 0.001” BZ417
micrometers220 series - mul-T-anvil micrometers207 SERIES - STAINLESS STEEL CAN SEAMMICROMETERsA new development in micrometer design andpatent is held by Starrett. This micrometerwill handle a wide variety of measurementsimpossible to obtain with regular micrometers,such as measuring the wall thickness oftubing, cylindrical walls from a hole or slotto an edge, many hard-to-reach locationsand the thickness of screw heads, shoulderlengths, etc.• Balanced frame and thimble design insureeasy handling, better readability.• Ring type knurled lock nut for quick andsure locking.• A choice of smooth friction thimble foruniform pressure or the combinationratchet and speeder for uniform pressureand quicker adjustment.Cat No Range Graduation Item No220MXRL-25 0 - 25mm 0.01mm BZ050220XRL-1 0 - 1” 0.001” BY927576 & 577 Series - rounded anvilmicrometersStarrett Can Seam Micrometers are made ofstainless steel and designed to measure thethickness and depth of can seams. The No.207 Series is used to measure the seam atthe outside bottom edge of the dome on thetop of an aerosol can.• Satin finish stainless steel - no glare - rustand stain resistant.• Advanced sleeve design with staggeredlines and distinct figures for precise andeasy readability.• The No. 207 Series has a snub nose whichpermits measuring aerosol type cans.• Extremely hard and stable one piecespindle (the heart of our accuracy).Cat No Range Graduation Item No207MZ 0 - 9.5mm 0.01mm BX642207Z 0 - 0.375” 0.001” BX637Ideal for measuring the wall thickness ofparts such as solid and split bearings, tubing,sleeves, collars, rings, various cylinders andalso measuring from the inside of a hole toan edge.• 576 Series can get into holes as small as8mm (5/16”) and measure up to 13mm(1/2”).• 577 Series can get into holes as small as9.5mm (3/8”) and measure up to 25mm(1”).208 SERIES - STAINLESS STEEL CAN SEAMMICROMETERsCat No Range Minimum Diameter Graduation Item No576MXR 0 - 13mm 8mm 0.01mm DC647208MDZ577MXP 0 - 25mm 9.5mm 0.01mm DC765576XR 0 - 1/2” 5/16” 0.001” DC637577XP 0 - 1” 3/8” 0.001” DC757483 SERIES - V-ANVIL MICROMETERSStarrett Can Seam Micrometers are made ofstainless steel and designed to measure thethickness and depth of can seams. The No.208 Series is used to measure the thicknessof the seam at the top and bottom of a flattoppedcan.• Satin finish stainless steel - no glare - rustand stain resistant.• Advanced sleeve design with staggeredlines and distinct figures for precise andeasy readability.• Quick and easy adjustment.• Extremely hard and stable one piecespindle (the heart of our accuracy).These micrometers are used to check out-ofroundnessfrom centreless grinding or othermachining operations. They are also usedfor measuring odd fluted taps, milling cuttersand reamers.• Direct measuring of three fluted tools.• Advanced sleeve design with staggeredlines and distinct figures for precise andeasy readability.Cat No Range Graduation Description Item No208MZWithout Depth Gauge BX7570 - 9.5mm 0.01mm208MDZ With Depth Gauge BX762208ZWithout Depth Gauge BX7420 - 0.375” 0.001”208DZ With Depth Gauge BX752Cat No Range No of Flutes It Will Measure Graduation Description Item No483MXRL-25 2 - 25mm0.01mm Ratchet Stop, CY842T483XRL-1 0.093 - 1”30.0001”Lock Nut,Tapered Spindle CY81211
- Page 2 and 3: Athol, Massachusetts, USALaguna Hil
- Page 4 and 5: CONTENTSCALIPERS06 Water Resistant
- Page 6 and 7: CaliperS - DIGITAL, DIAL & VERNIER7
- Page 8 and 9: Height Gauges & EXTERNAL micrometer
- Page 12: Groove Gauge, DEPTH micrometerS & M
- Page 15 and 16: ore gauges & dial & electronic indi
- Page 17: dial gauge standsmagnetic base indi
- Page 20 and 21: feeler gauge stock667 series - THIC
- Page 22 and 23: protractors, angle meter, v-blocks
- Page 24 and 25: punches18 Series - automatic centre
- Page 26 and 27: gauge blocks, ACCESSORIES, Granite
- Page 28 and 29: m1 rust inhibitor & lubricant, surf
- Page 30 and 31: ALPHABETICAL INDEXITEMPAGEAAngle Me
- Page 32: The L S Starrett Company LimitedOxn
micrometers220 series - mul-T-anvil micrometers207 SERIES - STAINLESS STEEL CAN SEAMMICROMETERsA new development in micrometer design andpatent is held by Starrett. This micrometerwill handle a wide variety of measurementsimpossible to obtain with regular micrometers,such as measuring the wall thickness oftubing, cylindrical walls from a hole or slotto an edge, many hard-to-reach locationsand the thickness of screw heads, shoulderlengths, etc.• Balanced frame and thimble design insureeasy handling, better readability.• Ring type knurled lock nut for quick andsure locking.• A choice of smooth friction thimble foruniform pressure or the combinationratchet and speeder for uniform pressureand quicker adjustment.Cat No Range Graduation Item No220MXRL-25 0 - 25mm 0.01mm BZ050220XRL-1 0 - 1” 0.001” BY927576 & 577 Series - rounded anvilmicrometersStarrett Can Seam Micrometers are made ofstainless steel and designed to measure thethickness and depth of can seams. The No.207 Series is used to measure the seam atthe outside bottom edge of the dome on thetop of an aerosol can.• Satin finish stainless steel - no glare - rustand stain resistant.• Advanced sleeve design with staggeredlines and distinct figures for precise andeasy readability.• The No. 207 Series has a snub nose whichpermits measuring aerosol type cans.• Extremely hard and stable one piecespindle (the heart of our accuracy).Cat No Range Graduation Item No207MZ 0 - 9.5mm 0.01mm BX642207Z 0 - 0.375” 0.001” BX637Ideal for measuring the wall thickness ofparts such as solid and split bearings, tubing,sleeves, collars, rings, various cylinders andalso measuring from the inside of a hole toan edge.• 576 Series can get into holes as small as8mm (5/16”) and measure up to 13mm(1/2”).• 577 Series can get into holes as small as9.5mm (3/8”) and measure up to 25mm(1”).208 SERIES - STAINLESS STEEL CAN SEAMMICROMETERsCat No Range Minimum Diameter Graduation Item No576MXR 0 - 13mm 8mm 0.01mm DC647208MDZ577MXP 0 - 25mm 9.5mm 0.01mm DC765576XR 0 - 1/2” 5/16” 0.001” DC637577XP 0 - 1” 3/8” 0.001” DC757483 SERIES - V-ANVIL MICROMETERSStarrett Can Seam Micrometers are made ofstainless steel and designed to measure thethickness and depth of can seams. The No.208 Series is used to measure the thicknessof the seam at the top and bottom of a flattoppedcan.• Satin finish stainless steel - no glare - rustand stain resistant.• Advanced sleeve design with staggeredlines and distinct figures for precise andeasy readability.• Quick and easy adjustment.• Extremely hard and stable one piecespindle (the heart of our accuracy).These micrometers are used to check out-ofroundnessfrom centreless grinding or othermachining operations. They are also usedfor measuring odd fluted taps, milling cuttersand reamers.• Direct measuring of three fluted tools.• Advanced sleeve design with staggeredlines and distinct figures for precise andeasy readability.Cat No Range Graduation Description Item No208MZWithout Depth Gauge BX7570 - 9.5mm 0.01mm208MDZ With Depth Gauge BX762208ZWithout Depth Gauge BX7420 - 0.375” 0.001”208DZ With Depth Gauge BX752Cat No Range No of Flutes It Will Measure Graduation Description Item No483MXRL-25 2 - 25mm0.01mm Ratchet Stop, CY842T483XRL-1 0.093 - 1”30.0001”Lock Nut,Tapered Spindle CY81211
Change language