User Manual

PrintingThe critical area of the screen to the left is the "Expression" box. Within this text box,you will place the syntax that will allow your template to print specific fields. There aremany ways to do this, and all are useful under different circumstances. However, thisguide will note the three core methods of adding fields to an expression:Option 1: "az" method - The "az" method uses a set of variables created bySmartAddresser 5 programmers for the default fields found within the Default Fieldsand Attributes. If your database contains SmartAddresser 5 default names, then the"az" method will work perfectly, but takes a bit more work than the nextoption. Between the fields, you'll need to either insert a comma or plus signs withquotation marks and a space between them to tell SmartAddresser 5 5.0 that you wantto print a space between each field. Examples of the "az" method would be:azFirst+" "+azLastorazFirst,azLastazAddressazCity+" "+azSt+" "+azZip or azCity,azSt,azZipOption 2: "Field,Field" method - The "Field,Field" method allows you to combine anyfields together on a single line, providing they are all character fields. It will also workfor a single field name by itself. Some examples of "Field,Field" method expressionswould be:161