PN 57.4400.0100_020115 - Genie

Section 23Electrical Equipment700 SeriesOperation:Glowplugs (starting aid) - to remove and to fit23.03Recommended torque:Engine type Nm lbf ft kgf mGlowplug 17 13 1,7Nuts 1,5 1 0,2Service operations:1. Remove inductionmanifold … … … … … … … … 12.06Special notes and tools:Note: In order to remove the glow plugs on the UA and UC engines, sometypes of induction manifold will have to be removed first. The inductionmanifolds fitted to UB engines need not be removed.For UA and UC engines: fit the cable with the straight connection (A) towardthe front of the engine.For UB engines: fit the cable with the straight connection toward the rear ofthe engine.Cautions: Ensure that the cables for the glow plug does not contact thehigh-pressure fuel pipes. On early engines, bend the connections away fromthe high-pressure pipes after the cables have been fitted, as it is possible fora short circuit to occur between the connection and the high-pressure pipe.Later engines are fitted with a cable which has a terminal that is already bentto the correct shape.See operation 23.04 to check the glowplugs.A05/99Printed in England© Propriety information of Perkins Engines Company Limited, all rights reserved146520 51-19M-1-SM 01-29-02 57.4400.0100